journal article·2003-03

Work-softening behavior of the ultrafine-grained Al alloy processed by high-strain-rate, dissimilar-channel angular pressing

Jae-Chul Lee, Jin-Yoo Shu, Jae Pyung Ahn

Publisher page

Abstract

Commercially pure Al alloy sheets were processed using high-strain-rate, dissimilar-channel angular pressing (DCAP) for as many as 100 passages through a channel with φ=120 deg, to investigate the work hardening caused by a low strain level (ɛ<2) and the work softening caused by an extremely high strain level (3<ɛ<58). The hardness of the alloy increased significantly by a factor of 2 at strains less than ∼2, while a gradual decrease in the hardness was observed at strains greater then ∼2. The work-hardening and the work-softening behaviors observed from the Al alloy were analyzed by correlating the measured properties with microstructural evolutions observed by transmission electron microscopy (TEM). A detailed microstructural-evolution sequence occurring at successive strain stages was also investigated based on TEM and electron backscattered diffraction (EBSD).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · High-Velocity Impact and Material Behavior · Ion-surface interactions and analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. R.Z. Valiev, O.A. Kaibyshev, R.L. Kuznetsov, R.S. Musalimov, and N.K. Tsenev: Scripta Metall. Mater., 1991, vol. 25, p. 2717.10.1016/0956-716X(91)90145-Q ↗
2. I.V. Alexsandrov: Metall. Mater. Int., 2001, vol. 7, p. 565.10.1007/BF03179255 ↗
3. N. Tsuji, Y. Saito, H. Utsunomiya, and S. Tanigawa: Scripta Mater., 1999, vol. 40, p. 795.10.1016/S1359-6462(99)00015-9 ↗
4. C.C. Koch: Nanostruct. Mater., 1993, vol. 2, p. 109.10.1016/0965-9773(93)90016-5 ↗
5. D.N. Lee, S.H. Kim, and K.H. Kim: Proc. 2nd Int. Conf. on Light Materials for Transportation Systems, Pusan, Korea, 2001, p. 297.
6. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. 197, p. 157.10.1016/0921-5093(95)09705-8 ↗
7. M. Furukawa, A. Utsunomiya, K. Matsubara, Z. Horita, and T.G. Langdon: Acta Mater., 2001, vol. 49, p. 3829.10.1016/S1359-6454(01)00262-2 ↗
8. K. Ayata, H. Mori, K. Taniguchi, and H. Matsuda: Iron Steel Inst. Jpn. Int., 1995, vol. 35, p. 680.10.2355/isijinternational.35.680 ↗
9. J.Y. Chang, J.S. Yoon, and G.H. Kim: Scripta Mater., 2001, vol. 45, p. 347.10.1016/S1359-6462(01)01040-5 ↗
10. K. Nakashima, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1998, vol. 46, p. 1589.10.1016/S1359-6454(97)00355-8 ↗
11. Y. Iwahashi, J. Wang, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1996, vol. 35, p. 143.10.1016/1359-6462(96)00107-8 ↗
12. K. Nakashima, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng. A, 2000, vol. 281, p. 82.10.1016/S0921-5093(99)00744-3 ↗
13. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1997, vol. 45, p. 4733.10.1016/S1359-6454(97)00100-6 ↗
14. M. Nemoto, Z. Horita, M. Furukawa, and T.G. Langdon: Met. Mater., 1998, vol. 4, p. 1181.10.1007/BF03025992 ↗
15. U. Chakkingal, A.B. Suriadi, and P.F. Thomson: Scripta Mater., 1998, vol. 39, p. 677.10.1016/S1359-6462(98)00234-6 ↗
16. M. Furukawa, Y. Ma, Z. Horita, M. Nemoto, R.Z. Valiev, and T.G. Langdon: Mater. Sci. Eng. A, 1998, vol. 241, p. 122.10.1016/S0921-5093(97)00481-4 ↗
17. R.Z. Valiev, R.K. Islamgaliev, N. Kuzmina, Y. Li, and T.G. Langdon: Scripta Mater., 1999, vol. 40, p. 117.10.1016/S1359-6462(98)00398-4 ↗
18. A. Vinogradov, S. Nagasaki, V. Patlan, K. Kitagawa, and M. Kawazoe: Nanostruct. Mater., 1999, vol. 11, p. 925.10.1016/S0965-9773(99)00392-X ↗
19. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Progr. Mater. Sci., 2000, vol. 45, p. 103.10.1016/S0079-6425(99)00007-9 ↗
20. S.L. Semiantin, D.P. Delo, and E.B. Shell: Acta Mater., 2000, vol. 48, p. 1841.10.1016/S1359-6454(00)00019-7 ↗
21. D.H. Shin, B.C. Kim, Y.S. Kim, and K.T. Park: Acta Mater., 2000, vol. 48, p. 2247.10.1016/S1359-6454(00)00028-8 ↗
22. J.C. Lee, H.K. Seok, J.H. Han, and Y.H. Chung: Mater. Res. Bull., 2001, vol. 36, p. 997.10.1016/S0025-5408(01)00557-8 ↗
23. I. Shan, I.G. Moon, H.S. Ko, and J.W. Park: Scripta Mater., 1999, vol. 41, p. 353.10.1016/S1359-6462(99)00188-8 ↗
24. J.R. Bowen, A. Gholinia, S.M. Roberts, and P.B. Prangnell: Mater. Sci. Eng. A, 2000, vol. 287, p. 87.10.1016/S0921-5093(00)00834-0 ↗
25. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1998, vol. 46, p. 3317.10.1016/S1359-6454(97)00494-1 ↗
26. H.K. Seok, J.Y. Suh, H.I. Lee, and J.C. Lee: J. Kor. Inst. Met. & Mater., 2001, vol. 39, p. 1270.
27. J.C. Lee, H.K. Seok, J.Y. Suh, J.H. Han, and Y.H. Jung: Metall. Mater. Trans. A, 2002, vol. 33, p. 665.10.1007/s11661-002-0128-z ↗
28. C.P. Chang, P.L. Sun, and P.W. Kao: Acta Mater., 2000, vol. 48, p. 3377.10.1016/S1359-6454(00)00138-5 ↗
29. J.C. Lee, H.K. Seok, and J.Y. Suh: Acta Mater., 2002, vol. 50, pp. 4005–19.10.1016/S1359-6454(02)00200-8 ↗
30. D. Yamaguchi, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1999, vol. 41, p. 791.10.1016/S1359-6462(99)00233-X ↗
31. J.D. Verhoven: Fundamentals of Physical Metallurgy, John Wiley & Sons, New York, NY, 1975, p. 352.