Probing the Characteristic Deformation Behaviors of Transformation-Induced Plasticity Steels
Source abstract
Abstract
The characteristic micromechanical behaviors of contrasting transformation-induced plasticity (TRIP) steels were investigated under tensile loading by in-situ neutron diffraction and transmission electron microscopy in detail. As demonstrated by the lattice strain development from the neutron diffraction, in the TRIP steel with ∼10 pct RA, microyielding of soft ferrite was responsible for the first stress partition, but a second stress sharing was caused by effective martensitic transformation. In the TRIP steel with less than 5 pct RA, where the contribution from the martensitic transformation was minor, stress partition took place virtually between the ferrite and bainite phase. Probing with systematic transmission electron microscopy (TEM) observations, we pin down the inherent correlation between the microstructural evolutions and the stress partition mechanism. Based on the experimental observations, the factors influencing the work-hardening behavior of TRIP steels are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. J. Mahieu, J. Maki, B.C. De Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–8010.1007/s11661-002-0378-9 ↗
2. I.B. Timokhina, P.D. Hodgson, and E.V. Pereloma: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2442–5410.1007/s11661-007-9258-7 ↗
3. E. Jimenez-Melero, N.H. van Dijk, L. Zhao, J. Sietsma, S.E. Offerman, J.P. Wright, and S. van der Zwaag: Acta Mater., 2007, vol. 55, pp. 6713–2310.1016/j.actamat.2007.08.040 ↗
4. X.D. Wang, B.X. Huang, L. Wang, and Y.H. Rong: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 1–710.1007/s11661-007-9366-4 ↗
5. P.J. Jacques, Q. Furnemont, S. Godet, T. Pardoen, K.T. Conlon, and F. Delannay: Phil. Mag., 2006, vol. 86, pp. 2371–9210.1080/14786430500529359 ↗
6. P.J. Jacques: Curr. Opin. Solid State Mater. Sci., 2004, vol. 8, pp. 259–6510.1016/j.cossms.2004.09.006 ↗
7. M.A. Meyers, and K.K. Chawla: Mechanical Metallurgy: Principles and Applications, Prentice-Hall, Englewood Cliffs, NJ, 1984, p. 355
8. P.J. Jacques, Q. Furnemont, F. Lani, T. Pardoen, and F. Delannay: Acta Mater., 2007, vol. 55, pp. 3681–9310.1016/j.actamat.2007.02.029 ↗
9. H.K.D.H. Bhadeshia: ISIJ Int., 2002, vol. 42, pp. 1059–6010.2355/isijinternational.42.1059 ↗
10. P.J. Jacques, J. Ladrière, and F. Delannay: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2759–6810.1007/s11661-001-1027-4 ↗
11. D. Wu, and Z. Li: ISIJ Int., 2006, vol. 46, pp. 1059–6610.2355/isijinternational.46.1059 ↗
12. W.C. Jeong, D.K. Matlock, and G. Krauss: Mater. Sci. Eng. A, 1993, vol. 165, pp. 1–810.1016/0921-5093(93)90620-T ↗
13. H. Su, W.D. Gunawadarna, A. Tuling, and B. Mintz: Mater. Sci. Technol., 2007, vol. 23, pp. 1357–6610.1179/174328407X179737 ↗
14. F. Perrard, and C. Scott: ISIJ Int., 2007, vol. 47, pp. 1168–7710.2355/isijinternational.47.1168 ↗
15. N. Jia, R.L. Peng, Y.D. Wang, G.C. Chai, S. Johansson, G. Wang, and P.K. Liaw: Acta Mater., 2006, vol. 54, pp. 3907–1610.1016/j.actamat.2006.04.019 ↗
16. D.K. Balch, and D.C. Dunand: Acta Mater., 2006, vol. 54, pp. 1501–1110.1016/j.actamat.2005.11.017 ↗
17. M.A.M. Bourke, R. Vaidyanathan, and D.C. Dunand: Appl. Phys. Lett., 1996, vol. 69, pp. 2477–7910.1063/1.117503 ↗
18. P. Sittner, P. Lukáš, V. Novak, M.R. Daymond, and G.M. Swallowe: Mater. Sci. Eng. A, 2004, vol. 378, pp. 97–10410.1016/j.msea.2003.09.112 ↗
19. S. Wroński, A. Baczmański, R. Dakhlaoui, C. Braham, K. Wierzbanowski, and E.C. Oliver: Acta Mater., 2007, vol. 55, pp. 6219–3310.1016/j.actamat.2007.07.044 ↗
20. M.L. Young, J.D. Almer, M.R. Daymond, D.R. Haeffner, and D.C. Dunand: Acta Mater., 2007, vol. 55, pp. 1999–201110.1016/j.actamat.2006.11.004 ↗
21. G.J. Fan, L.F. Fu, Y.D. Wang, Y. Ren, H. Choo, P.K. Liaw, G.Y. Wang, and N.D. Browning: Appl. Phys. Lett., 2006, vol. 89, pp. 101918–10192010.1063/1.2348783 ↗
22. K.X. Tao, J.J. Wall, H.Q. Li, D.W. Brown, S.C. Vogel, and H. Choo: J. Appl. Phys., 2006, vol. 100, pp. 1235151–57
23. J. Zrník, O. Stejskal, Z. Nový, P. Hornak, and M. Fujda: Mater. Sci. Eng. A, 2007, vol. 462, pp. 253–5810.1016/j.msea.2006.03.149 ↗
24. O. Muránsky, P. Lukáš, J. Zrník, and P. Sittner: Physica B, 2006, vol. 385, pp. 587–8910.1016/j.physb.2006.05.367 ↗
25. W. Bleck, and I. Schael: Steel Res., 2000, vol. 71, pp. 173–7810.1002/srin.200005709 ↗
26. K. Tao, H. Choo, H. Li, B. Clausen, J.E. Jin, and Y.K. Lee: Appl. Phys. Lett., 2007, vol. 90, pp. 1019111–1310.1063/1.2711758 ↗
27. E.C. Oliver, P.J. Withers, M.R. Daymond, S. Ueta, and T. Mori: Appl. Phys. A, 2002, vol. 74, pp. 1143–4510.1007/s003390201555 ↗
28. H.N. Han, C.G. Lee, C.S. Oh, T.H. Lee, and S.J. Kim: Acta Mater., 2004, vol. 52, pp. 5203–1410.1016/j.actamat.2004.07.031 ↗
29. A.C. Larson and R.B. von Dreele: LAUR 86-748 Report, Los Alamos National Laboratory, Los Alamos, NM, 1986
30. H.M. Rietveld: J. Appl. Cryst., 1969, vol. 2, pp. 65–7110.1107/S0021889869006558 ↗
31. Y. Tomota, H. Tokuda, Y. Adachi, M. Wakita, N. Minakawa, A. Moriai, and Y. Morii: Acta Mater., 2004, vol. 52, pp. 5737–4510.1016/j.actamat.2004.08.016 ↗
32. J. Zrník, O. Muránsky, P. Lukáš, P. Sittner, and Z. Nový: Mater. Sci. Forum, 2005, vol. 502, pp. 339–4410.4028/www.scientific.net/MSF.502.339 ↗
33. R. Vaidyanathan, M.A.M. Bourke, and D.C. Dunand: Acta Metall., 1999, vol. 47, pp. 3353–66
34. J. Huang, S.C. Vogel, W.J. Poole, M. Militzer, and P.J. Jacques: Acta Mater., 2007, vol. 55, pp. 2683–9310.1016/j.actamat.2006.11.049 ↗