Modeling the Stress-Strain Behavior and Hot Tearing during Direct Chill Casting of an AZ31 Magnesium Billet
Source abstract
Abstract
Quantitative knowledge of the thermal mechanical history experienced during direct chill (DC) casting aids the scientific understanding of the process especially in terms of defect formation such as hot tearing. In this work, a thermomechanical finite element (FE) model has been developed to simulate the DC casting of magnesium alloy AZ31 billets. The mathematical model simulates the evolution of temperature, stress, and strain within the billet during an industrial DC casting process. These quantities were then used to calculate the evolution in pressure, and hence hot tearing tendency, within the semisolid regime via the Rappaz–Drezet–Gremaud (RDG) criterion. The temperature predictions were validated against experimental thermocouple data measured during a plant trial at an industrial magnesium DC casting facility. In addition, the residual elastic strains predicted by the model were compared to residual strain measurements made at the Canadian Neutron Beam Centre (CNBC) using a magnesium billet produced during the industrial casting trial. The validated model was then used to quantitatively assess the impact of casting speed on the hot tearing tendency in AZ31 billets.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. P.W. Baker and P.T. McGlade: Light Metals 2001, New Orleans, LA, 2001, J. Anjier, ed., TMS, Warrendale, PA, 2001, pp. 855–62.
2. D.G. Eskin, Suyitno, and L. Katgerman: Prog. Mater. Sci., 2004, vol. 49, pp. 629–711.10.1016/S0079-6425(03)00037-9 ↗
3. J. Grandfield, C.C. Young, K. Oswald, and A.P. Baker: 8th Aus. Conf. on Aluminum Cast House Technology, Brisbane, Australia, 2003, P. Whiteley, ed., TMS, Warrendale, PA, 2003, pp. 215–21.
4. J.F. Grandfield: Alum. Trans. (USA), 2000, vol. 3, pp. 41–51.
5. A.B. Phillion, S.L. Cockcroft, and P.D. Lee: Scripta Mater., 2006, vol. 55, pp. 489–92.10.1016/j.scriptamat.2006.03.035 ↗
6. I. Farup, M. Rappaz, and J.M. Drezet: Acta Mater., 2001, vol. 49, pp. 1261–69.10.1016/S1359-6454(01)00013-1 ↗
7. J.B. Mitchell, S.L. Cockcroft, D. Viano, C.J. Davidson, and D. St John: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2503–12.10.1007/s11661-007-9221-7 ↗
8. L.Y. Zhao, Baoyin, N. Wang, V. Sahajwalla, and R.D. Pehlke: Int. J. Cast Met. Res., 2000, vol. 13, pp. 167–74.10.1080/13640461.2000.11819399 ↗
9. W.S. Pellini: Foundry, 1952, pp. 125–37.
10. D. Viano, D. StJohn, J. Grandfield, and C. Caceres: Light Metals 2005, San Francisco, CA, 2005, H. Kvande, ed., TMS, Warrendale, PA, 2005, pp. 1069–73.
11. D.C. Weckman and P. Niessen: Metall. Trans. B, 1982, vol. 13B, pp. 593–602.10.1007/BF02650017 ↗
12. D.J.P. Adenis, K.H. Coats, and D.V. Ragone: J. Inst. Met., 1963, vol. 91, pp. 395–403.
13. S.G. Hibbins: Int. Symp Light Metals, METSOC-CIM, Calgary, CA, 1998, pp. 265–80.
14. H. Hao, D.M. Maijer, M.A. Wells, S.L. Cockcroft, D. Sediako, and S. Hibbins: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3843–54.10.1007/s11661-004-0290-6 ↗
15. J. Sengupta, S.L. Cockcroft, D.M. Maijer, M.A. Wells, and A. Larouche: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 523–40.10.1007/s11663-004-0053-1 ↗
16. J. Sengupta, S.L. Cockcroft, D.M. Maijer, and A. Larouche: Mater. Sci. Eng. A, 2005, vol. 397, pp. 157–77.10.1016/j.msea.2005.02.011 ↗
17. J.M. Drezet and M. Rappaz: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3214–25.10.1007/BF02663872 ↗
18. M. M’Hamdi, A. Mo, and H.G. Fjaer: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3069–83.10.1007/s11661-006-0188-6 ↗
19. H.G. Fjaer and A. Mo: Metall. Trans. B, 1990, vol. 21B, pp. 1049–61.
20. A.J. Williams, T.N. Croft, and M. Cross: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 727–34.10.1007/s11663-003-0042-9 ↗
21. M. Rappaz, J.M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
22. J.M. Drezet and M. Rappaz: Light Metals 2001, New Orleans, LA, 2001, J. Anjier, ed., TMS, Warrendale, PA, 2001, pp. 887–93.
23. Suyitno, W.H. Kool, and L. Katgerman: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1537–46.10.1007/s11661-005-0245-6 ↗
24. A.B. Phillion, S.L. Cockcroft, J. Sengupta, and D.M. Maijer: Light Metals 2005, H. Kvande, ed., TMS, San Francisco, CA, 2005, pp. 1063–68.
25. A.B. Phillion, D. Maijer, and S.L. Cockcroft: Model Casting, Welding & Advanced Solidification Proc. XI, Opio, France, 2006, C.A. Gandin and M. Bellet, eds., TMS, Warrendale, PA, 2006, pp. 807–14.
26. D.J. Lahaie and M. Bouchard: Metall. Mater. Trans. B, 2001, vol. 32B, pp. 697–705.10.1007/s11663-001-0124-5 ↗
27. Metals Handbook, S.R. Lampman, T.B. Zorc, S.D. Henry, J.L. Daquila, and A.W. Ronke, eds., ASM INTERNATIONAL, Metals Park, OH, 1990, vol. 2, p. 481.
28. Magnesium and Magnesium Alloys, M.M. Avedesian and H. Baker, eds., ASM INTERNATIONAL, Metals Park, OH, 1999, p. 258.
29. C.M. Estey, S.L. Cockcroft, D.M. Maijer, and C. Hermesmann: Mater. Sci. Eng. A, 2004, vol. 383, pp. 245–51.10.1016/j.msea.2004.06.004 ↗
30. J.A. Dantzig and M. Rappaz: Solidification, EPFL Press, Lausanne, 2009, pp. 105–49.10.1201/9781439808030 ↗
31. M. Rappaz, A. Jacot, and W.J. Boettinger: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 467–79.10.1007/s11661-003-0083-3 ↗
32. H. Hao, D.M. Maijer, M.A. Wells, S.L. Cockcroft, and R.B. Rogge: Magn. Technol., 2005, pp. 223–28.