Atom probe field ion microscopy investigation of boron containing martensitic 9 Pct chromium steel
Source abstract
Abstract
The chemical compositions of the ferrite matrix and various other phases in an Fe-0.17 C-9 Cr-1.55 Mo-0.27 V-0.015 N-0.01B (mass pct) steel in as-received and crept conditions were measured with atom probe field ion microscopy (APFIM). The results showed the presence of some residual boron within the ferrite matrix. Analyses showed that boron was distributed within M23C6, M6C, MX, and Laves phases. Phosphor atoms were detected at the M23C6-ferrite interface in the crept condition. The results are compared to predictions from thermodynamic calculations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. T. Fujita: Proc. Int. EPRI/National Power Conf., London, May 1995, E. Metcalfe, ed., Pica, Oxon, 1995, pp. 190–200.
2. F. Masuyama: Proc. Int. EPRI/National Power Conf., London, May 1995, E. Metcalfe, ed., Pica, Oxon, 1995, pp. 98–113.
3. K. Spiradek, R. Bauer, and G. Zeiler. Materials for Power Engineering 1994, Part I, Proc. Int. Conf., Liege, Belgium, Oct. 3–6, 1994, D. Coutsouradis, J.H. Davidson, J. Ewald, P. Greenfield, T. Khahn, M. Malik, D.B. Meadowcroft, V. Regis, R.B. Scarlin, F. Schubert, D.V. Thornton, eds., Kluwer Academic Publishers, Dortrecht, 1994, pp. 251–62.10.1007/978-94-011-1048-8_18 ↗
4. C. Berger, R. Bauer, G. Honeyman, and E. Potthast: Proc. 11th Int. Forgmaster Meeting, Terni/Spoleto, Italy, June 11–14, 1991.
5. R. Bauer: Report COST 501/II, WP3, Bohler, Kapfenber, Austria, 1989.
6. L. Lundin: Ph.D. Thesis, Chalmers University of Technology, Goteborg, Sweden, 1995.
7. L. Lundin, S. Fallman, and H.-O. Andren: Mater. Sci. Technol., 1997, vol. 13, pp. 233–42.10.1179/mst.1997.13.3.233 ↗
8. P. Warbichler, F. Hofer, P. Hofer, and E. Letofsky: Micron, 1998, vol. 29, pp. 63–72.10.1016/S0968-4328(97)00054-1 ↗
9. M.K. Miller and G.D.W. Smith: Atom Probe Microanalysis: Principles and Applications to Materials Problems, Materials Research Society, Pittsburgh, PA, 1989.
10. M.K. Miller: J. Microsc.—Oxford, 1997, vol. 186, pp. 1–16.10.1046/j.1365-2818.1997.1910759.x ↗
11. B. Sundman, B. Jansson, and J.-O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
12. S.S. Babu, S.A. David, J.M. Vitek, and M.K. Miller: Metall. Mater. Trans. A 1996, vol. 27A, pp. 763–74.10.1007/BF02648964 ↗
13. L. Lundin and B. Richarz: Appl. Surf. Sci., 1995, vols. 87–88, pp. 194–99.10.1016/0169-4332(94)00519-2 ↗
14. J.W. Martin and R.D. Doherty: Stability of Microstructure in Metallic Systems, Cambridge Solid State Science Series, University Press, Cambridge, United Kingdom, 1980, p. 176.
15. W. Poeppel and U. Hildebrand: Pract. Met., 1989, vol. 26, pp. 141–53.10.1515/pm-1989-260306 ↗
16. N. Nilsvang and G. Eggeler: Pract. Met., 1987, vol. 24, pp. 323–35.10.1515/pm-1987-240704 ↗
17. P. Hofer, H. Cerjak, B. Schaffernak, and P. Warbichler: Steel Res., 1998, vol. 69, pp. 343–48.10.1002/srin.199805562 ↗
18. L. Karlsson, H. Norden, and H. Odelius: Acta Metall., 1988, vol. 36, pp. 1–12.10.1016/0001-6160(88)90023-5 ↗
19. L. Karlsson and H. Norden: Acta Metall., 1988, vol. 36, pp. 13–24.10.1016/0001-6160(88)90024-7 ↗
20. L. Karlsson: Acta Metall. 1988, vol. 36, pp. 25–34.10.1016/0001-6160(88)90025-9 ↗
21. L. Karlsson and H. Norden: Acta Metall. 1988, vol. 36, pp. 35–48.10.1016/0001-6160(88)90026-0 ↗