journal article·2008-02Open access

Effect of Grain Refinement on Structure Evolution, “Floating” Grains, and Centerline Macrosegregation in Direct-Chill Cast AA2024 Alloy Billets

R. Nadella, D.G. Eskin, L. Katgerman

Abstract

Direct-chill (DC) cast billets 192 mm in diameter of an Al-Cu-Mg alloy were examined in detail with the aim to reveal the effects of grain refining (GR) and casting speed on structure, “floating” grains, and centerline macrosegregation. Experimental results show that grain size and dendrite arm spacing (DAS) tend to coarsen toward the billet center with a local refinement DAS in the center. In GR billets, grain size does not change much with the cooling rate, casting speed, and grain refiner amount. Coarse-DAS (floating) grains are observed around the billet axis regardless of GR and the amount of Ti, though their amount is significantly higher in GR billets. Macrosegregation profiles show a negligible influence of GR, while the effect of casting speed is large. The concept of solute-depleted floating grains contributing to the centerline macrosegregation is substantiated by microsegregation measurements, which show that, independent of GR, coarse dendrite branches have a depleted concentration plateau in contrast to the fine dendrite arms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. E.F. Emley: Int. Met. Rev., 1976, No. 206, pp. 75–115
2. J.F. Grandfield, P.T. McGlade: Mater. Forum, 1996, vol. 20, pp. 29–51
3. L. Arnberg, L. Bäckerud, G. Chai: Solidification Characteristics of Aluminum Alloys, Vol. 3: Dendrite Coherency, American Foundrymen’s Society, Des Plaines, IL, 1996, pp. 201–55
4. H. Yu and D.A. Granger: in Aluminium Alloys. Their Physical and Mechanical Properties, E.A. Starke and T.H. Sanders, eds., EMAS, Warley, UK, 1986, pp. 17–29
5. B. Gariepy, Y. Caron: in Light Metals 1991, E.L. Rooy, ed., TMS, Warrendale, PA, 1991, pp. 961–71
6. T.L. Finn, M.G. Chu, W.D. Bennon: in Micro/Macro Scale Phenomena in Solidification, C. Beckermann et al., eds., ASME, New York, NY, 1992, pp. 17–26
7. G. Lesoult, V. Albert, B. Appolaire, H. Combeau, D. Daloz, A. Joly, C. Stomp, G.U. Grün, P. Jarry: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 285–9110.1016/S1468-6996(01)00055-9 ↗
8. A.M. Glenn, S.P. Russo, P.J.K. Paterson: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1513–2310.1007/s11661-003-0263-1 ↗
9. A. Joly, G.U. Grün, D. Daloz, H. Combeau, G. Lesoult: Mater. Sci. Forum, 2000, vols. 329–330, pp. 111–2010.4028/www.scientific.net/MSF.329-330.111 ↗
10. R.K Nadella, D. Eskin, and L. Katgerman: in Continuous Casting of Non-Ferrous Metals, H.R. Müller, ed., Wiley-VCH Verlag, Weinheim, Germany, 2005, pp. 277–8210.1002/9783527607969.ch38 ↗
11. R. Nadella, D. Eskin, L. Katgerman: Mater. Sci. Forum, 2006, vols. 519–521, pp. 1841–4610.4028/www.scientific.net/MSF.519-521.1841 ↗
12. R. Nadella, D. Eskin, L. Katgerman: in Light Metals 2007, M. Sørlie, ed., TMS, Warrendale, PA, 2007, pp. 727–32
13. M.C. Flemings: ISIJ Int., 2000, vol. 40, pp. 833–4110.2355/isijinternational.40.833 ↗
14. M.G. Chu, J.E. Jacoby: in Light Metals 1990, C.M. Bickert, ed., TMS, Warrendale, PA, 1990, pp. 925–30
15. D.G. Eskin, J. Zuidema Jr., V.I. Savran, L. Katgerman: Mater. Sci. Eng., 2004, vol. A384, pp. 232–4410.1016/j.msea.2004.05.066 ↗
16. D.G. Eskin, V.I. Savran, L. Katgerman: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1965–7610.1007/s11661-005-0059-6 ↗
17. M.A. Kearns, P.S. Cooper: Mater. Sci. Technol., 1997, vol. 13, pp. 650–5410.1179/mst.1997.13.8.650 ↗
18. Suyitno, V.I. Savran, D.G. Eskin, L. Katgerman: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3551–6110.1007/s11661-004-0192-7 ↗
19. A. Håkonsen, D. Mortensen, S. Benum, H.E. Vatne: in Light Metals 1999, C.E. Eckert, ed., TMS, Warrendale, PA, 1999, pp. 821–27
20. I. Maxwell, A. Hellawell: Acta Metall., 1975, vol. 23, pp. 229–3710.1016/0001-6160(75)90188-1 ↗
21. M.G. Chu: in Light Metals 2002, W. Schneider, ed., TMS, Warrendale, PA, 2002, pp. 899–907
22. H. Nagaumi: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 49–5710.1016/S1468-6996(01)00025-0 ↗
23. M. Easton, J. Grandfield, D. St. John, B. Rinderer: Mater. Sci. Forum, 2006, vols. 519–521, pp. 1675–8010.4028/www.scientific.net/MSF.519-521.1675 ↗
24. R.C. Dorward, D.J. Beerntsen: in Light Metals 1990, C.M. Bickert, ed., TMS, Warrendale, PA, 1990, pp. 919–24
25. D.G. Eskin, Q. Du, L. Katgerman: Scripta Mater. 2006, vol. 55, pp. 715–1810.1016/j.scriptamat.2006.06.021 ↗