The effects of stress level and grain size on the ambient temperature creep deformation behavior of an alpha Ti-1.6 wt pct V alloy
Source abstract
Abstract
Ambient (room) temperature studies have been carried out on an α-Ti-1.6 wt pct V alloy to determine the effects of stress level and grain size on ambient temperature creep behavior. Creep tests were performed at five different stress levels ranging from 75 to 95 pct of the yield stress value on specimens with an average grain size of 226 µm. It has been found that the alloy exhibits appreciable creep at stress levels far below the yield stress, with creep occurring at values as low as 75 pct of the yield stress. The extent of creep strain was found to decrease with a decrease in stress level. Creep tests were also performed on this alloy with different grain sizes ranging from 38 to 226 µm at a stress level of 90 pct of the yield stress. It was seen that the extent of creep strain decreased with a decrease in grain size. Fine slip and time-dependent twinning were found to be the creep deformation mechanisms. Based on the results of this investigation and earlier studies, it is suggested that time-dependent twinning is a major creep deformation mechanism in α-titanium alloys that contain small amounts of alloying elements. The time-dependent twinning phenomenon has been attributed to the diffusion of oxygen away from the twin-matrix interface, permitting the growth of twins.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. H. Adenstedt: Met. Progr., 1949, vol. 56, pp. 658–79.
2. W.A. Wood: Technical Report No. 45, Columbia University, NY, Apr. 1967.
3. W.A. Wood: Technical Report No. 54, Columbia University, NY, Apr. 1968.
4. W.H. Riemann: J. Mater., 1971, vol. 6, pp. 926–33.
5. A.J. Hatch, J.M. Patridge, and R.G. Broadwell: J. Mater., 1967, vol. 2, pp. 111–21.
6. B.C. Odegaard and A.W. Thompson: Metall. Trans., 1974, vol. 5, pp. 1207–13.10.1007/BF02644335 ↗
7. M.A. Imam and C.M. Gilmore: Metall. Trans. A, 1979, vol. 10A, pp. 419–25.10.1007/BF02697068 ↗
8. A.W. Thompson and B.C. Odegaard: Metall. Trans., 1973, vol. 4, pp. 899–908.10.1007/BF02645587 ↗
9. H.P. Chu: J. Mater., JMLSA, 1970, vol. 5, pp. 633–42.
10. W.H. Miller, Jr., R.T. Chen, and E.A. Starke, Jr.: Metall. Trans. A, 1987, vol. 18A, pp. 1451–68.10.1007/BF02646658 ↗
11. G.Y. Gao, and S.C. Dexter: Metall. Trans. A, 1987, vol. 18A, pp. 1125–30.10.1007/BF02668562 ↗
12. D. Sil, C.A. Greene, and S. Ankem: in Beta Ti Alloys for the 1990s, D. Eylon, R.R. Boyer, and D.A. Kiss, eds., TMS, Warrendale, PA, 1993, pp. 309–16.
13. S. Ankem, C.A. Greene, and S. Singh: Scripta Metall. Mater., 1994, vol. 30, pp. 803–08.10.1016/0956-716X(94)90203-8 ↗
14. S. Ankem, C.A. Greene, S. Singh, and D. Sil: Proc. Harold Margolin Symp. on “Microstructure/Property Relationships of Titanium Alloys,” S. Ankem and J.A. Hall, eds., TMS, Warrendale, PA, 1994, pp. 35–42.
15. A. Ramesh and S. Ankem: Metall. Mater. Trans. A, 2003, vol. 33A, pp. 1137–44.
16. C.A. Hultgren, C.A. Greene, and S. Ankem: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1675–79.10.1007/s11661-999-0106-9 ↗
17. C.A. Greene, S. Ankem, and S. Singh: Titanium ’95 Science and Technology, P.A. Blenkinsop, W.J. Evans, and H.M. Flower, eds., Institute of Materials, London, 1995, pp. 1315–22.
18. A. Ramesh and S. Ankem: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2249–51.10.1007/s11661-999-0037-5 ↗
19. D. Doraiswamy and S. Ankem: Acta Mater., 2003, vol. 51, pp. 1607–19.10.1016/S1359-6454(02)00561-X ↗
20. T. Neeraj, D.H. Hou, G.S. Daehn, and M.J. Mills: Acta Mater., 2000, vol. 48, pp. 1225–35.10.1016/S1359-6454(99)00426-7 ↗
21. V. Hasija, S. Ghosh, M. Mills, and D. Joseph: Acta Mater., 2003, vol. 51, pp. 4533–49.10.1016/S1359-6454(03)00289-1 ↗
22. D.G. Attwood and P.M. Hazzledine: Metallography, 1976, vol. 9, pp. 483–501.10.1016/0026-0800(76)90016-1 ↗
23. R.E. Hook and J.P. Hirth: Acta Mater., 1967, vol. 15, pp. 535–51.10.1016/0001-6160(67)90087-9 ↗
24. S. Ankem and H. Margolin: Metall. Trans. A, 1980, vol. 11A, pp. 963–72.10.1007/BF02654710 ↗
25. P.G. Partridge: Metall. Rev, 1967, vol. 121, pp. 169–74.10.1179/imr.1967.12.1.169 ↗
26. C.L. Magee, D.W. Hoffmann, and R.G. Davies: Phil. Mag., 1971, vol. 23, pp. 1531–40.10.1080/14786437108217019 ↗
27. J.W. Christian and S. Mahajan: Progr. Mater. Sci., 1995, vol. 39, pp. 1–151.10.1016/0079-6425(94)00007-7 ↗
28. R.W. Armstrong and P.J. Worthington: in Metallurgical Effects at High Strain Rates, R.W. Rohde, B.M. Butcher, J.R. Holland, and C.H. Karnes, eds., Plenum Press, New York, NY, 1973, pp. 401–14.10.1007/978-1-4615-8696-8_22 ↗
29. H. Conrad, M. Doner, and B. de Meester: in Titanium Science and Technology, R.I. Jaffee and H.M. Burte, eds., Plenum Press, New York, NY, 1973, pp. 969–76.
30. M.A. Meyers, O. Vöhringer, and V.A. Lubarda: Acta Mater., 2001, vol. 49, pp. 4025–39.10.1016/S1359-6454(01)00300-7 ↗
31. J.J. Gilman: Phil. Mag., 1997, vol. 76, pp. 329–36.10.1080/01418619708209978 ↗
32. W.G. Johnston and J.J. Gilman: J. Appl. Phys., 1959, vol. 30, pp. 129–33.10.1063/1.1735121 ↗
33. J.D. Eshelby, F.C. Frank, and F.R.N. Nabarro: Phil. Mag., 1951, 42, pp. 351–64.10.1080/14786445108561060 ↗
34. F.J. Zerilli and R.W. Armstrong: in Shock Compression of Condensed Matter, S.C. Schmidt and W.C. Tao, eds., AIP, Woodbury, CT, 1995, pp. 315–18.
35. G.T. Gray, III: J. Phys. IV, 1997, vol. 7, pp. C3-C423.