journal article·2009-02Open access

Experimental and Analytical Investigations on Plane Strain Toughness for 7085 Aluminum Alloy

R.T. Shuey, F. Barlat, M.E. Karabin, D.J. Chakrabarti

Abstract

Data are presented on plane strain fracture toughness, yield strength, and strain hardening for three orientations of samples from quarter-thickness (t/4) and midthickness (t/2) locations of alloy 7085 plates with different gages aged past peak strength with different 2nd step aging times (T7X). These data are fit to an expression adapted from Hahn and Rosenfield (1968), in which toughness is proportional to strain hardening, the square root of yield strength, and the square root of a critical strain e c . Strain-hardening exponent n is replaced by an alternative measure, since the stress-strain data do not follow a power law. With increased overaging, the increase of strain hardening dominates the decrease of strength, such that toughness increases. The critical strain, which represents the influence of the microstructure on toughness, has no trend with overaging time. Constituents and grain boundary precipitates, thought to be the microstructural elements most differentiating alloy 7085 from alloy 7050, are quantified at t/4 and at t/2 on one plate. From this the greater critical strain at t/2 than at t/4 is mainly attributed to greater effective spacing of constituents. Critical strain is also greater with longitudinal loading and crack propagating in the long transverse direction, but definite understanding of this will require better anisotropic fracture mechanics and further microstructural characterization.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fatigue and fracture mechanics · Metal Forming Simulation Techniques · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. J.T. Staley: Materials Selection and Design, ASM, Materials Park, OH, 1997, pp. 381–89.
2. D.J. Chakrabarti, J. Liu, R.R. Sawtell, and G.B Venema: Proc. ICAA9, Institute of Materials Engineering Australasia Ltd., North Melbourne, 2004, pp. 969–74
3. J. Boselli, D.J. Chakrabarti, and R.T. Shuey: Proc. ICAA11, Wiley-VCH, Weinheim, 2008, in press
4. S.A. Meguid: Engineering Fracture Mechanics, Elsevier Applied Science, New York, NY, 1989, p. 288
5. T.L. Anderson: Fracture Mechanics—Fundamental and Applications, CRC Press, Boca Raton, FL, 1995, p. 60
6. H. Tada, P.C. Paris, G.R. Irwin: The Stress Analysis of Cracks Handbook, 3rd ed., ASME, New York, NY, 200010.1115/1.801535 ↗
7. G.R. Irwin: Proc. 7th Sagamore Conf., Raquette Lake, NY, 1960, pp. 63–78.
8. Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials, Designation E399-90, ASTM, Philadelphia, PA, 1991
9. J.M. Krafft: Appl. Mater. Res., 1964, vol. 3, pp. 88–101
10. G.T. Hahn and A.R. Rosenfield: Applications Related Phenomena in Titanium Alloys, ASTM Special Technical Publication No. 432, ASTM, Philadelphia, PA, 1968, pp. 5–3210.1520/STP33617S ↗
11. G.G. Garrett, J.F. Knott: Metall. Trans. A, 1977, vol. 9A, pp. 1187–1201
12. R.K. Pandey, S. Banerjee: Eng. Fract. Mech., 1978, vol. 10, pp. 817–2910.1016/0013-7944(78)90036-X ↗
13. R.O. Richie, W.L. Server, R.A. Wullaert: Metall. Trans. A, 1979, vol. 10A, pp. 1557–7010.1007/BF02812022 ↗
14. C.J. Peel, P.J.E. Forsyth: Met. Sci., 1973, vol. 7, pp. 121–2710.1016/0036-9748(73)90193-2 ↗
15. M.P. Blinn, R.A. Williams: Materials Selection and Design, ASM, Materials Park, OH, 1997, pp. 536–38.
16. J.E. Hatch: Aluminum: Properties and Physical Metallurgy, ASM, Metals Park, OH, 1984. pp. 180–81
17. D.G. Altenpohl: Aluminum: Technology, Applications and Environment, TMS, Warrendale, PA, 1998, p. 135
18. M.F. Ashby: Materials Selection in Mechanical Design, Elsevier, Amsterdam, 2005
19. N. Kamp, I. Sinclair, M.J. Starink: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1125–3610.1007/s11661-002-0214-2 ↗
20. A. Deschamps, S. Esmaeili, W.J. Poole, M. Militzer: J. Phys. IV, 2000, vol. 10, pp. Pr6-151–Pr6-15610.1051/jp4:2000626 ↗
21. L.M. Cheng, W.J. Poole, D.J. Embury, D.J. Lloyd: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2473–8110.1007/s11661-003-0007-2 ↗
22. D. Dumont, A. Deschamps, Y. Bréchet, C. Sigli, J.C. Ehrström: Mater. Sci. Technol., 2004, vol. 20, pp. 567–7610.1179/026708304225016662 ↗
23. J.T. Staley: Properties Related to Fracture Toughness, STP 605, ASTM, Philadelphia, PA, 1976, pp. 71–103.10.1520/STP27801S ↗
24. D. Dumont, A. Deschamps, Y. Bréchet: Mater. Sci. Eng. A, 2003, vol. A356, pp. 326–3610.1016/S0921-5093(03)00145-X ↗
25. N.U. Deshpande, A.M. Gokhale, D.K. Denzer, J. Liu: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1191–20110.1007/s11661-998-0246-3 ↗
26. P.T. Unwin, G.C. Smith: J. Inst. Met., 1969, vol. 97, pp. 299–310.
27. D. Embury, E. Nes: Z. Metallkd., 1974, vol. 65, pp. 45–55
28. E. Hornbogen: Z. Metallkd., 1975, vol. 66, pp. 511–13
29. G.M. Ludtka, D.E. Laughlin: Metall. Trans. A, 1982, vol. 13A, pp. 411–25.10.1007/BF02643350 ↗
30. M.E. Karabin, F. Barlat, and R.T. Shuey: Metall. Mater. Trans. A, 2009, vol. 40A, DOI 10.1007/s11661-008-9705-010.1007/s11661-008-9705-0 ↗
31. J.R. Rice and M.A. Johnson: Inelastic Behavior of Solids, McGraw-Hill, New York, NY, 1970, pp. 641–72.
32. A. Pineau and T. Pardoen: Comprehensive Structural Integrity, Elsevier, New York, NY, 2007, vol. 2, pp. 757–59.
33. A.M. Gokhale, N.U. Deshpande, D.K. Denzer, J. Liu: Metall. Mater. Trans. A, 1998, vol. 29A, 1203–1010.1007/s11661-998-0247-2 ↗
34. D. Dumont, A. Deschamps, Y. Brechet: Acta Mater., 2004, vol. 52, pp. 2529–4010.1016/j.actamat.2004.01.044 ↗
35. N.U. Deshpande: Ph.D. Thesis, Georgia Institute of Technology, Atlanta, GA, 1996.
36. T. Pardoen, J.W. Hutchinson: Acta Mater., 2003, vol. 51, pp. 133–4810.1016/S1359-6454(02)00386-5 ↗
37. X.S. Gao, T.H. Wang, J. Kim: Int. J. Solids Struct., 2005, vol. 42, pp. 5097–117.10.1016/j.ijsolstr.2005.02.028 ↗
38. D. Lassance, F. Scheyvaerts, T. Pardoen: Eng. Fract. Mech., 2006, vol. 73, pp. 1009–34.10.1016/j.engfracmech.2005.12.004 ↗
39. D. Broek: Eng. Fract. Mech., 1973, vol. 5, pp. 55–66.10.1016/0013-7944(73)90007-6 ↗
40. R.M. McMeeking: J. Mech. Phys. Solids, 1977, vol. 25, pp. 357–8110.1016/0022-5096(77)90003-5 ↗
41. A. Needleman, V. Tvergaard: J. Mech. Phys. Solids, 1987, vol. 35, pp. 151–8310.1016/0022-5096(87)90034-2 ↗
42. V. Tvergaard, J.W. Hutchinson: J. Mech. Phys. Solids, 1992, vol. 40, pp. 1377–9710.1016/0022-5096(92)90020-3 ↗