Effect of Rare-Earth (La, Ce, and Y) Additions on the Microstructure and Mechanical Behavior of Sn-3.9Ag-0.7Cu Solder Alloy
Source abstract
Abstract
In this article, we report on the microstructure and mechanical properties of Ce- and Y-containing Sn-3.9Ag-0.7Cu solders. The microstructures of both as-processed solder and solder joints containing rare-earth (RE) elements (up to 0.5 wt pct) are more refined compared to conventional Sn-3.9Ag-0.7Cu, with decreases in secondary Sn dendrite size and spacing and a thinner Cu6Sn5 intermetallic layer at the Cu/solder interface. These results agree well with similar observations seen in La-containing solders reported previously. The monotonic shear behavior of reflowed Sn-3.9Ag-0.7Cu-X(Ce, Y)/Cu lap shear joints was studied as well as the creep behavior at 368 K (95 °C). The data were compared with results obtained for Sn-3.9Ag-0.7Cu and Sn-3.9Ag-0.7Cu-XLa alloys. All RE-containing alloys exhibited creep behavior similar to Sn-3.9Ag-0.7Cu. Alloys with Ce additions exhibited a small decrease in ultimate shear strength but higher elongations compared with Sn-Ag-Cu. Similar observations were seen in La-containing solders. The influence of the RE-containing intermetallics (CeSn3 and YSn3) that form in these alloys on the microstructural refinement, solidification behavior, and mechanical performance of these novel materials is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. N. Chawla, Int. Mater. Rev., 2009, vol. 54, pp. 368–84.10.1179/174328009X461069 ↗
2. L. Garner, S. Sane, D. Suh, T. Byrne, A. Dani, T. Martin, M. Mello, M. Patel, and R. William: Intel Technol. J., 2005, vol. 9 (4), pp. 297–308.10.1535/itj.0904.04 ↗
3. A. Syed, S.K. Tae, M.C. Young, W.K. Chang, and Y. Min: Proc. Electron. Packag. Technol. Conf. EPTC, IEEE Press, New York, 2006, pp. 404–11.
4. J.M. Song, C.F. Huang, and H.Y. Chuang: J. Electron. Mater., 2006, vol. 35 (12), pp. 2154–63.10.1007/s11664-006-0326-3 ↗
5. D.Y. Shih, D. Leonard, D.W. Henderson, T. Gosselin, S.I. Cho, J. Yu, and W.K. Choi: JOM, 2004, vol. 56 (6), pp. 34–38.10.1007/s11837-004-0108-4 ↗
6. I.E. Anderson, J. Walleser, and J.L. Harringa: JOM, 2007, vol. 59 (7), pp. 38–43.10.1007/s11837-007-0087-3 ↗
7. C.M.L. Wu, D.Q. Yu, C.M.T. Law, and L.J. Wang: Mater. Res., 2002, vol. 17 (12), pp. 3146–54.10.1557/JMR.2002.0455 ↗
8. M. Dittes and H. Walter: Soldering Surf. Mount. Technol., 2003, vol. 15 (1), pp. 50–54.10.1108/09540910310455734 ↗
9. C.M.L. Wu and Y.W. Wong: J. Mater. Sci. - Mater. Electron., 2007, vol. 18, pp. 77–91.10.1007/s10854-006-9022-6 ↗
10. A. Ramirez, H. Mavoori, and S. Jin : Appl. Phys. Lett., 2002, vol. 80 (3), pp. 398–400.10.1063/1.1435075 ↗
11. Z.G. Chen, Y.W. Shi, Z.D. Xia, and Y.F. Yan: J. Electron. Mater., 2003, vol. 32 (4), pp. 235–43.10.1007/s11664-003-0215-y ↗
12. D.Q. Yu, J. Zhao, and L. Wang: J. Alloys Compd., 2004, vol. 376, pp. 170–75.10.1016/j.jallcom.2004.01.012 ↗
13. Y. Shi, J. Tian, H. Hao, Z. Xia, Y. Lei, and F. Guo: J. Alloys Compd., 2008, vol. 453, pp. 180–84.10.1016/j.jallcom.2006.11.165 ↗
14. C.M.T. Law, C.M.L. Wu, D.Q. Yu, M. Li, and D.Z. Chi: IEEE Trans. Adv. Packaging, 2005, vol. 28 (2), pp. 252–58.10.1109/TADVP.2005.846939 ↗
15. M.A. Dudek, R.S. Sidhu, N. Chawla, and M. Renavikar: J. Electron. Mater., 2006, vol. 35 (12), pp. 2088–97.10.1007/s11664-006-0318-3 ↗
16. M.A. Dudek, R.S. Sidhu, and N. Chawla: JOM, 2006, vol. 58 (6), pp. 57–62.10.1007/s11837-006-0184-8 ↗
17. H. Hao, J. Tian, Y.W. Shi, Y.P. Lei, and Z.D. Xia: J. Electron. Mater., 2007, vol. 36 (7), pp. 766–74.10.1007/s11664-007-0138-0 ↗
18. M. Pei and J. Qu: J. Electron. Mater., 2008, vol. 37 (3), pp. 331–38.10.1007/s11664-007-0335-x ↗
19. H. Hao, J. Tian, Y.W. Shi, Y.P. Lei, and Z.D. Xia: J. Electron. Mater., 2007, vol. 36 (7), pp. 766–74.10.1007/s11664-007-0138-0 ↗
20. J.X. Wang, S.B. Xue, Z.J. Han, S.L. Yu, Y. Chen, Y.P. Shi, and H. Wang: J. Alloys Compd., 2009, vol. 467, pp. 219–26.10.1016/j.jallcom.2007.12.033 ↗
21. W.M. Xiao, Y.W. Shi, Y.P. Lei, Z.D. Xia, and F. Guo: J. Electron. Mater., 2008, vol. 37, pp. 1751–55.10.1007/s11664-008-0532-2 ↗
22. L. Liang, Q. Wang, and Z. Zhao: Proc. Electron. Packag. Technol. Conf. EPTC, IEEE Press, New York, 2007, pp. 1–4.
23. D.T. Rooney, D. Geiger, D. Shangguan, and J. Lau: Proc. Electron. Compon. Technol. Conf., IEEE Press, New York, 2008, pp. 89–98.10.1109/ECTC.2008.4549955 ↗
24. M.A. Dudek and N. Chawla: J. Electron. Mater., 2009, vol. 38 (2), pp. 210–20.10.1007/s11664-008-0544-y ↗
25. M.A. Dudek and N. Chawla, Acta Mater., 2009, vol. 57, pp. 4588–99.10.1016/j.actamat.2009.06.031 ↗
26. R.S. Sidhu, X. Deng, and N. Chawla: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 349–62.10.1007/s11661-007-9412-2 ↗
27. X. Deng and N. Chawla: J. Mater. Sci., 2006, vol. 41 (17) pp. 5731–34.10.1007/s10853-006-0100-1 ↗
28. A. Ayyar and N. Chawla: Comp. Sci. Technol., 2006, vol. 66 (13) pp. 1980–94.10.1016/j.compscitech.2006.01.007 ↗
29. X. Deng, N. Chawla, F. Tang, I.E. Anderson, and B. Glesson: Proc. Materials Science and Technology 2005, TMS, Warrendale, PA, 2005, pp. 1–5.
30. X. Deng, G. Piotrowski, N. Chawla, and K.S. Narasimhan: Mater. Sci. Eng., A., 2008, vol. 491, pp. 19–27.10.1016/j.msea.2008.05.009 ↗
31. N. Chawla, J.J. Williams, and R. Saha: J. Light Met., 2002, vol. 2 (4), pp. 215–27.10.1016/S1471-5317(03)00005-1 ↗
32. F. Ochoa, X. Deng, and N. Chawla: J. Electron. Mater., 2004, vol. 33, pp. 1596–1607.10.1007/s11664-004-0103-0 ↗
33. N. Chawla, F. Ochoa, V.V. Ganesh, X. Deng, M. Koopman, K.K. Chawla, and S. Scarritt: J. Mater. Sci. - Mater. Electron., 2004, vol. 15, pp. 385–88.10.1023/B:JMSE.0000025683.19987.b3 ↗
34. X. Deng, G. Piotrowski, J.J. Williams, and N. Chawla: J. Electron. Mater., 2003, vol. 32, pp. 1403–13.10.1007/s11664-003-0108-0 ↗
35. S. Beer, G. Frommeyer, and E. Schmid: Proc. Conf. Magnesium Alloys and Their Applications, Wiley-VCH-Verlag, Munich, Germany, 1992, pp. 317–24.
36. Y.N. Malinochka, L.N. Bagnyuk, and S.A. Zdorovets: Russ. Metall., 1989, vol. 1, pp. 76–83.
37. R. Kesri and S. Hamar-Thibault: Z. Metallkd., 1989, vol. 80, pp. 502–10.
38. K. Ichikawa and S. Ishizuka: Trans. Jpn. Int. Met., 1990, vol. 30, pp. 75–82.
39. M.A. Dudek and N. Chawla: Mater. Charact., 2006, vol. 59 (9), pp. 1364–68.10.1016/j.matchar.2007.10.008 ↗
40. Desk Handbook: Phase Diagrams for Binary Alloys, H. Okamoto, ed., ASM, Materials Park, OH, 2000.
41. Y. Yu, Z. Xia, F. Guo, and Y. Shi: J. Electron. Mater., 2008, vol. 37 (7), pp. 975–81.10.1007/s11664-008-0454-z ↗
42. K. Kuniyoshi, K. Ozono, M. Ikeda, T. Suzuki, S.G. Kim, and W.T. Kim: Sci. Technol. Adv. Mater., 2006, vol. 7, pp. 595–600.10.1016/j.stam.2006.06.001 ↗
43. J. Maurer, P. Bouissou, B Perrin, and P. Tabeling: Europhys. Lett. 1989, vol. 8, pp. 67–72.10.1209/0295-5075/8/1/012 ↗
44. Y. Ruan and B. Wei: Sci. China, Phys. Mech. Astron., 2007, vol. 50, pp. 563–71.10.1007/s11433-007-0055-5 ↗
45. K. Fujiwara, K. Maeda, N. Usami, and K. Nakajima: Phys. Rev. Lett., 2008, vol. 101, 055503 (4 pages).10.1103/PhysRevLett.101.055503 ↗
46. X. Deng, R.S. Sidhu, P. Johnson, and N. Chawla: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 55–64.10.1007/s11661-005-0138-8 ↗
47. P.G. Harris and K.S. Chaggar: Solder. Surf. Mt. Technol., 1998, vol. 10 (3), pp. 38–52.10.1108/09540919810237110 ↗
48. M.A. Dudek and N. Chawla: Intermetallics, 2009, in press.
49. H.X. Xie, N. Chawla, and Y.L. Shen: unpublished research, 2010.
50. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. ASM, 1969, vol. 62, p. 155.
51. M.D. Mathew, H. Yang, S. Movva, and K.L. Murty: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 99–105.10.1007/s11661-005-0142-z ↗
52. R.J. McCabe and M.E. Fine: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1531–39.10.1007/s11661-002-0075-8 ↗
53. O.D. Sherby, R.H Klundt, and A.K. Miller: Metall Trans. A, 1977, vol. 8A, pp. 843–50.10.1007/BF02661565 ↗
54. J. Lin and O.D. Sherby: Res. Mech., 1981, vol. 2, p. 251.
55. O.D. Sherby and E.M. Taleff: Mater. Sci. Eng., A, 2002, vol. 322, pp. 89–99.10.1016/S0921-5093(01)01121-2 ↗
56. S.L. Robinson and O.D. Sherby: Acta Metall., 1969, vol. 17, p. 109.10.1016/0001-6160(69)90132-1 ↗
57. Z. Chen, Y. Shi, and Z. Xia: J. Electron. Mater., 2004, vol. 33 (9), pp. 964–71.10.1007/s11664-004-0023-z ↗