journal article·2008-11

Evolution of Structure, Composition, and Stress in Nanoporous Gold Thin Films with Grain-Boundary Cracks

Ye Sun, T. John Balk

Publisher page

Abstract

Nanoporous gold (np-Au) thin films were fabricated from Au-Ag alloy films sputtered onto substrates. At several stages of dealloying, the evolution of the microstructure and Ag content were analyzed and stress in the np-Au thin films was measured. A nanoporous structure evolved almost immediately throughout the film thickness, and the ligament width coarsened during further dealloying, with a time dependence of t1/8. The initial alloy films, which contained 25 at. pct Au, became stress free after extended dealloying and during thermal cycling up to 200 °C. Preferential dissolution caused cracking at grain boundaries, which accommodated a portion of the volume contraction from dealloying, but the films nonetheless remained attached to their substrates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nanoporous metals and alloys · Electrocatalysts for Energy Conversion · Anodic Oxide Films and Nanostructures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. D. van Noort, C.F. Mandenius: Biosens. Bioelectron., 2000, vol. 15, pp. 203–0910.1016/S0956-5663(00)00061-0 ↗
2. Y. Ding, M.W. Chen, J. Erlebacher: J. Am. Chem. Soc., 2004, vol. 126, pp. 6876–7710.1021/ja0320119 ↗
3. D. Kramer, R.N. Viswanath, J. Weissmuller: Nano Lett., 2004, vol. 4, pp. 793–9610.1021/nl049927d ↗
4. M.B. Cortie, A.I. Maaroof, G.B. Smith: Gold Bull., 2005, vol. 38, pp. 14–2210.1007/BF03215223 ↗
5. J. Erlebacher, M.J. Aziz, A. Karma, N. Dimitrov, K. Sieradzki: Nature, 2001, vol. 410, pp. 450–5310.1038/35068529 ↗
6. J. Erlebacher, K. Sieradzki: Scripta Mater., 2003, vol. 49, pp. 991–9610.1016/S1359-6462(03)00471-8 ↗
7. J. Erlebacher: J. Electrochem. Soc., 2004, vol. 151, pp. C614–2610.1149/1.1784820 ↗
8. R. Li, K. Sieradzki: Phys. Rev. Lett., 1992, vol. 68, pp. 1168–7110.1103/PhysRevLett.68.1168 ↗
9. J. Biener, A.M. Hodge, A.V. Hamza, L.M. Hsiung, J.H. Satcher: J. Appl. Phys., 2005, vol. 97, pp. 024301-1–024301-410.1063/1.1832742 ↗
10. A.M. Hodge, J. Biener, L.L. Hsiung, Y.M. Wang, A.V. Hamza, J.H. Satcher: J. Mater. Res., 2005, vol. 20, pp. 554–5710.1557/JMR.2005.0081 ↗
11. D. Lee, M.H. Zhao, X.D. Wei, X. Chen, S.C. Jun, J. Hone, E.G. Herbert, W.C. Oliver, J.W. Kysar: Appl. Phys. Lett., 2006, vol. 89, pp. 111916-1–111916-3
12. C.A. Volkert, E.T. Lilleodden, D. Kramer, J. Weissmuller: Appl. Phys. Lett., 2006, vol. 89, pp. 061920-1–061920-310.1063/1.2240109 ↗
13. J.Z. Zhu, E. Seker, H. Bart-Smith, M.R. Begley, R.G. Kelly, G. Zangari, W.K. Lye, M.L. Reed: Appl. Phys. Lett., 2006, vol. 89, pp. 133104-1–133104-3
14. A.M. Hodge, J. Biener, J.R. Hayes, P.M. Bythrow, C.A. Volkert, A.V. Hamza: Acta Mater., 2007, vol. 55, pp. 1343–4910.1016/j.actamat.2006.09.038 ↗
15. D. Lee, X. Wei, X. Chen, M. Zhao, S.C. Jun, J. Hone, E.G. Herbert, W.C. Oliver, J.W. Kysar: Scripta Mater., 2007, vol. 56, pp. 437–4010.1016/j.scriptamat.2006.08.069 ↗
16. L.J. Gibson, M.F. Ashby: Cellular Solids: Structures and Properties, 2nd ed., Cambridge University Press, Cambridge, United Kingdom, 1997, p. 20610.1017/CBO9781139878326 ↗
17. S. Burger, Y. Sun, F. Yang, and T.J. Balk: University of Kentucky, Lexington, KY, unpublished research, 2007
18. Y. Ding, J. Erlebacher: J. Amer. Chem. Soc., 2003, vol. 125, pp. 7772–7310.1021/ja035318g ↗
19. Y. Ding, Y.J. Kim, J. Erlebacher: Adv. Mater., 2004, vol. 16, pp. 1897–90010.1002/adma.200400792 ↗
20. S. Parida, D. Kramer, C.A. Volkert, H. Rosner, J. Erlebacher, J. Weissmuller: Phys. Rev. Lett., 2006, vol. 97, pp. 035504-1–035504-410.1103/PhysRevLett.97.035504 ↗
21. W.D. Nix: Metall. Trans. A, 1989, vol. 20A, pp. 2217–4510.1007/BF02666659 ↗
22. Y. Sun, T.J. Balk: Mater. Res. Soc. Symp. Proc., 2006, vol. 924, pp. Z1.2.1–6
23. N.A. Senior, R.C. Newman: Nanotechnology, 2006, vol. 17, pp. 2311–1610.1088/0957-4484/17/9/040 ↗
24. M.C. Dixon, T.A. Daniel, M. Hieda, D.M. Smilgies, M.H.W. Chan, D.L. Allara: Langmuir, 2007, vol. 23, pp. 2414–2210.1021/la062313z ↗
25. X. Lu, T.J. Balk, R. Spolenak, E. Arzt: Thin Solid Films, 2007, vol. 515, pp. 7122–2610.1016/j.tsf.2007.03.023 ↗
26. Y. Sun, J. Ye, Z. Shan, A.M. Minor, T.J. Balk: JOM, 2007, vol. 59, pp. 54–5810.1007/s11837-007-0118-0 ↗
27. B.D. Cullity, S.R. Stock: Elements of X-Ray Diffraction, 3rd ed., Prentice-Hall, Inc., Upper Saddle River, NJ, 2001, pp. 638–39
28. R.W. Balluffi, S.M. Allen, W.C. Carter: Kinetics of Materials, 1st ed., John Wiley & Sons, Inc., Hoboken, NJ, 2005, pp. 368–40210.1002/0471749311 ↗
29. Y. Sun, K.P. Kucera, S.A. Burger, T.J. Balk: Scripta Mater., 2008, vol. 58, pp. 1018–2110.1016/j.scriptamat.2008.01.036 ↗
30. L.B. Freund, S. Suresh: Thin Film Materials: Stress, Defect Formation, and Surface Evolution, 1st ed., Cambridge University Press, Cambridge, United Kingdom, 2003, pp. 197–200