journal article·2000-02

Mechanical properties of laser-deposited composite boride coating using nanoindentation

Arvind Agarwal, Narendra B. Dahotre

Publisher page

Abstract

Nanoindentation proves to be an effective technique to measure mechanical properties of “composite” materials, as it has high spatial resolution that enables estimation of properties even from fine grains, particles, and precipitates. The elastic modulus, E, of the composite boride coating deposited on AISI 1010 steel using the laser surface engineering (LSE) process has been computed using the nanoindentation technique. The highest E value of 477.3 GPa was achieved for coating in a sample that contained 0.69 volume fraction of TiB2 particles in the coating after processing with the highest laser traverse speed of 33 mm/s. A comparison between the theoretical and experimental computation of the elastic modulus suggests that theoretical elastic modulus values are lower than computed elastic modulus, as the latter includes the effect of dissolution of fine TiB2 particles in Fe matrix and metastable phase formation such as FeaBb and TimBn. Dissolution of fine TiB2 particles in the Fe matrix in the coating region has been corroborated by transmission electron microscope (TEM) micrographs and corresponding energy-dispersive spectroscope (EDS) analysis and selected area diffraction (SAD) pattern.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7 (6), pp. 1564–83.10.1557/JMR.1992.1564 ↗
2. J. Mencik and M.V. Swain: Surf. Eng., 1997, vol. 13 (6), pp. 498–504.10.1179/sur.1997.13.6.498 ↗
3. E. Vancoille, J.P. Celis, and J.R. Roos: Thin Solid Films, 1993, vol. 224, pp. 168–76.10.1016/0040-6090(93)90428-R ↗
4. G.M. Pharr, D.S. Harding, and W.C. Oliver: Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures, Proc. NATO Advanced Study Institute on Mechanical Properties and Deformation Behavior of Materials Having Ultra-Fine Microstructures, Porto Novo, Portugal, M. Nastasi, D.M. Parkin, and H. Glecter, eds., Kluwer Academic Publishers, Hingham, MA, 1993, pp. 449–61.10.1007/978-94-011-1765-4_29 ↗
5. S.K. Biswas, K. Venkatesh, M.S. Bobji, and K.S. Sebastian: Trans. Ind. Inst. Met., 1996, vol. 49 (5), pp. 725–38.
6. J.P. Celis, J.R. Roos, E. Vancoille, and M. Franck: Wear of Materials, Proc. Int. Conf. on Wear of Materials, Orlando, FL, 1991, K.C. Ludema and R.G. Bayer, eds., American Society of Mechanical Engineers, New York, 1991, vol. 2, pp. 655–58.
7. Arvind Agarwal and Narendra B. Dahotre: Int. J. Refractory Mater. Hard Met., 1999, vol. 17 (4), pp. 282–93.
8. Arvind Agarwal and Narendra B. Dahotre: Mater: Characterization, 1999, vol. 42 (1), pp. 31–44.10.1016/S1044-5803(98)00054-0 ↗
9. Arvind Agarwal, Narendra B. Dahotre, and Lawrence F. Allard: Pract. Metallogr, 1999, vol. 36 (3), pp. 250–63.
10. R.A. Cutler: Engineering Materials Handbook: Ceramic and Glasses, ASM INTERNATIONAL, Metals Park, OH, 1991, vol. 4, pp. 787–803.
11. A. Agarwal and N.B. Dahotre: Elevated Temperature Coatings: Science and Technology III, TMS Annual Meeting, San Diego, CA, 1999, J.M. Hampikian and N.B. Dahotre, eds., TMS, Warrendale, PA, pp. 273–84.
12. O.M. Akselsen: J. Mater. Sci., 1992, vol. 27, pp. 1989–2000.10.1007/BF01117909 ↗
13. Arvind Agarwal and Narendra B. Dahotre: Lasers Eng., 1999, in press.
14. J. Mazumder: in Metallurgical and Ceramic Protective Coatings, Kurt H. Stern, ed., Chapman and Hall, London, 1996, pp. 74–11110.1007/978-94-009-1501-5_5 ↗
15. Metals Handbook, ASM, Materials Park, OH, 1978, vol. 1, pp. 640–50.
16. Arvind Agarwal and Narendra B. Dahotre: Surf. Coating Technol., 1998, vol. 106, pp. 242–50.10.1016/S0257-8972(98)00545-3 ↗
17. A.A. Ogwu and T.J. Davies: Mater Sci. Technol., 1993, vol. 9, pp. 231–17.
18. Arvind Agarwal, Narendra B. Dahotre, and T.S. Sudarshan: Surf. Eng., 1999, vol. 15 (1), pp. 27–32.10.1179/026708499322911601 ↗
19. X.G. Ning, J. Pan, K.Y. Hu, and H.Q. Ye: Mater. Res. Soc. Symp. Proc., W.A.T. Clark, U. Dahmen, and C.L. Briant, eds., Boston, MA, 1991, pp. 865–70.