Solid-state reactions during heating mechanically milled Al/TiO2 composite powders
Source abstract
Abstract
Solid-state reactions between Al and TiO2 during heating high-energy mechanically milled Al/TiO2 composite powders have been investigated by using a combination of thermal analysis, X-ray diffraction (XRD), and various microstructural characterization techniques. When the TiO2 particles and their interparticle spacing in the Al/TiO2 composite powder particles are sufficiently large, the reaction between Al and TiO2 proceeds by two steps. The low-temperature step is an interfacial reaction, which starts at a temperature close to 660 °C. The high-temperature step is a reaction facilitated by bulk diffusion and starts at a temperature above 820 °C. The first phase formed from the reaction is always Al3Ti irrespective of the starting powder composition or milling time. Al2O3 is difficult to form at temperatures below 800 °C. The formation of the α-Ti(Al,O) phase proceeds slowly and requires either continuous heating to a temperature above 1000 °C or holding at a temperature close to 1000 °C for a period of time. Mechanical milling of the Al/TiO2 powder enhances the interfacial reaction between Al and TiO2. This enhancement is originated from the establishment and refinement of Al/TiO2 composite microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. H.X. Peng, D.Z. Wang, L. Geng, and C.K. Yao: Scripta Mater., 1997, vol. 37 (2), pp. 199–204.10.1016/S1359-6462(97)00073-0 ↗
2. C.F. Feng and L. Froyen: Composites A, 2000, vol. A31, pp. 385–90.10.1016/S1359-835X(99)00041-X ↗
3. P.C. Maity, S.C. Panigrahi, and P.N. Chakraborty: Scripta Metall, 1993, vol. 28, pp. 549–52.10.1016/0956-716X(93)90194-W ↗
4. I.C. Barlow, H. Jones, and W.M. Rainforth: Acta Mater., 2001, vol. 49, pp. 1209–24.10.1016/S1359-6454(01)00016-7 ↗
5. S.P. Gaus, M.P. Harmer, H.M. Chan, H.S. Caram, J. Bruhn, and N. Claussen: J. Am. Ceram. Soc., 2000, vol. 83 (7), pp. 1606–12.10.1111/j.1151-2916.2000.tb01438.x ↗
6. N.J. Welham: Mater. Sci. Eng. A, 1998, vol. A255, pp. 81–89.10.1016/S0921-5093(98)00770-9 ↗
7. Z.Y. Ma and S.C. Tjong: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1931–42.10.1007/s11661-997-0123-5 ↗
8. N.J. Welham: Intermetallics, 1998, vol. 6 (5), pp. 363–68.10.1016/S0966-9795(97)00087-3 ↗
9. M.J. Crimp: Mater. Sci. Eng. A, 1995, vol. A193, pp. 633–39.10.1016/0921-5093(94)03303-X ↗
10. J. Bruhn, S. Schicker, D.E. Garcia, R. Janssen, F. Wagner, and N. Claussen: Key Eng. Mater., 1997, vols. 127–131, pp. 73–80.10.4028/www.scientific.net/KEM.127-131.73 ↗
11. B.J.M. Aikin, T.H. Courtney, and D.R. Maurice: Mater. Sci. Eng. A, 1991, vol. A147, pp. 229–37.10.1016/0921-5093(91)90850-M ↗
12. J.S. Benjamin and T.E. Volin: Metall. Trans., 1974, vol. 5, pp. 1929–34.10.1007/BF02644161 ↗
13. D.L. Zhang and D.Y. Ying: Mater. Sci. Eng. A, 2001, vol. A301, pp. 90–96.10.1016/S0921-5093(00)01388-5 ↗
14. D.Y. Ying and D.L. Zhang: J. Metastable Nanocrystalline Mater., 2001, vol. 10, pp. 211–16.10.4028/www.scientific.net/JMNM.10.211 ↗
15. D.L. Zhang and D.Y. Ying: J. Metastable Nanocrystalline Mater., 2001, vol. 10, pp. 323–28.10.4028/www.scientific.net/JMNM.10.323 ↗
16. D.L. Zhang, D.Y. Ying, and P. Munroe: unpublished research, 2004.
17. E. Ma, C.V. Thompson, and L.A. Clevenger: J. Appl. Phys., 1991, vol. 69 (4), pp. 2211–18.10.1063/1.348722 ↗
18. Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, ed., ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 1.
19. I.J. Polmear: in Light Alloys: Metallurgy of the Light Alloys, 3rd ed., Edward Arnold, London, 1995, pp. 346–47.
20. I.C. Barlow, H. Jones, and W.M. Rainforth: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2937–45.10.1007/s11661-001-0168-9 ↗
21. I.C. Balow, H. Jones, and W.M. Rainforth: Mater. Sci. Eng., 2003, vol. A351, pp. 344–57.
22. I. Tsuchitori and H. Fukunaga: J. Jpn. Inst. Met., 1995, vol. 59, pp. 1306–14.10.2320/jinstmet1952.59.12_1306 ↗
23. J. Pan, J.H. Li, H. Fukunaga, X.G. Ning, H.Q. Ye, Z.K. Yao, and D.M. Yang: Composite Sci. Technol., 1997, vol. 57, pp. 319–25.10.1016/S0266-3538(96)00127-3 ↗
24. M. Atzmon: in Solid State Powder Processing, A.H. Clauer and J.J. DeBardillo, eds., TMS, Warrendale, PA, 1990, pp. 10–20.
25. D.Y. Ying and D.L. Zhang: Mater. Sci. Technol., 2001, vol. 17, pp. 815–22.10.1179/026708301101510582 ↗