In Situ Neutron-Diffraction Studies on the Creep Behavior of a Ferritic Superalloy
Source abstract
Abstract
Precipitate strengthening effects toward the improved creep behavior have been investigated in a ferritic superalloy with B2-type (Ni,Fe)Al precipitates. In situ neutron diffraction has been employed to study the evolution of the average phase strains, (hkl) plane-specific lattice strains, interphase lattice misfit, and grain-orientation texture during creep deformation of the ferritic superalloy at 973 K (700 °C). The creep mechanisms and particle-dislocation interactions have been studied from the macroscopic creep behavior. At a low stress level of 107 MPa, the dislocation-climb-controlled power-law creep is dominant in the matrix phase, and the load partition between the matrix and the precipitate phases remains constant. However, intergranular stresses develop progressively during the primary creep regime with the load transferred to 200 and 310 oriented grains along the axial loading direction. At a high stress level of 150 MPa, deformation is governed by the thermally activated dislocation glide (power-law breakdown) accompanied by the accelerated texture evolution. Furthermore, an increase in stress level also leads to load transfer from the plastically deformed matrix to the elastically deformed precipitates in the axial direction, along with an increase in the lattice misfit between the matrix and the precipitate phases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. C. Stallybrass and G. Sauthoff: Mater. Sci. Eng. A, 2004, vol. 387, pp. 985-90.10.1016/j.msea.2004.01.108 ↗
2. C. Stallybrass, A. Schneider, and G. Sauthoff: Intermetallics, 2005, vol. 13, pp. 1263-68.10.1016/j.intermet.2004.07.048 ↗
3. Z.K. Teng, C.T. Liu, G. Ghosh, P.K. Liaw, and M.E. Fine: Intermetallics, 2010, vol. 18, pp. 1437-43.10.1016/j.intermet.2010.03.026 ↗
4. Z.K. Teng, M.K. Miller, G. Ghosh, C.T. Liu, S. Huang, K.F. Russell, M.E. Fine, and P. K. Liaw: Scripta Mater., 2010, vol. 63, pp. 61-64.10.1016/j.scriptamat.2010.03.013 ↗
5. S.M. Zhu, S.C. Tjong, and J.K.L. Lai: Acta Mater., 1998, vol. 46, pp. 2969-76.10.1016/S1359-6454(98)00022-6 ↗
6. H. Bhadeshia: ISIJ Int., 2001, vol. 41, pp. 626-40.10.2355/isijinternational.41.626 ↗
7. M.B. Ruggles, S. Cheng, and E. Krempl: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 1994, vol. 186, pp. 15-21.10.1016/0921-5093(94)90301-8 ↗
8. H. Magnusson and R. Sandstrom: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2009, vol. 527, pp. 118-25.10.1016/j.msea.2009.07.060 ↗
9. D.B. Miracle: Acta Metall. Mater., 1993, vol. 41, pp. 649-84.10.1016/0956-7151(93)90001-9 ↗
10. M.R. Daymond, M. Preuss, and B. Clausen: Acta Mater., 2007, vol. 55, pp. 3089-3102.10.1016/j.actamat.2007.01.013 ↗
11. S. Ma, V. Seetharaman, and B.S. Majumdar: Acta Mater., 2008, vol. 56, pp. 4102-13.10.1016/j.actamat.2008.04.057 ↗
12. S. Ma, D. Brown, M.A.M. Bourke, M.R. Daymond, and B.S. Majurndar: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2005, vol. 399, pp. 141-53.10.1016/j.msea.2005.02.034 ↗
13. M. Fukuhara and A. Sanpei: ISIJ Int., 1993, vol. 33, pp. 508-12.10.2355/isijinternational.33.508 ↗
14. A.C. Larson and R.B. Von Dreele: GSAS-General Structure Analysis System, p. 143.
15. M.R. Daymond, M.A.M. Bourke, R.B. VonDreele, B. Clausen, and T. Lorentzen: J. Appl. Phys., 1997, vol. 82, pp. 1554-62.10.1063/1.365956 ↗
16. H.J. Stone, T.M. Holden, and R.C. Reed: Acta Mater., 1999, vol. 47, pp. 4435-48.10.1016/S1359-6454(99)00314-6 ↗
17. S.C. Tjong and Z.Y. Ma: Mater. Lett., 2002, vol. 56, pp. 59-64.10.1016/S0167-577X(02)00418-4 ↗
18. G. Ghosh and G.B. Olson: Acta Mater., 2002, vol. 50, pp. 2655-75.10.1016/S1359-6454(02)00096-4 ↗
19. H.M.A. Winand, A.F. Whitehouse, and P.J. Withers: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 2000, vol. 284, pp. 103-13.10.1016/S0921-5093(00)00762-0 ↗
20. W. Gale and T. Totemeier: Smithells Metals Reference Book, 8th ed., Elsevier, Atlanta, GA, 2004.
21. H. Calderon and M.E. Fine: Mater. Sci. Eng., 1984, vol. 63, pp. 197-208.10.1016/0025-5416(84)90121-6 ↗
22. H.A. Calderon, M.E. Fine, and J.R. Weertman: Metall. Trans. A, 1988, vol. 19A, pp. 1135-46.10.1007/BF02662573 ↗
23. R. Taillard, A. Pineau, and B.J. Thomas: Mater. Sci. Eng., 1982, vol. 54, pp. 209-19.10.1016/0025-5416(82)90115-X ↗
24. H. Choo, D. Seo, J. Beddoes, M.A.M. Bourke, and D.W. Brown: Appl. Phys. Lett., 2004, vol. 85, pp. 4654-56.10.1063/1.1823043 ↗
25. M.R. Daymond and H.G. Priesmeyer: Acta Mater., 2002, vol. 50, pp. 1613-26.10.1016/S1359-6454(02)00026-5 ↗
26. E.C. Oliver, M.R. Daymond, and P. J. Withers: Acta Mater., 2004, vol. 52, pp. 1937-51.10.1016/j.actamat.2003.12.035 ↗
27. Y. Tomota, P. Lukas, S. Harjo, J.H. Park, N. Tsuchida, and D. Neov: Acta Mater., 2003, vol. 51, pp. 819-30.10.1016/S1359-6454(02)00473-1 ↗
28. M.T. Hutchings, P.J. Withers, T.M. Holden, and T. Lorentzen: Introduction to the Characterization of Residual Stress by Neutron Diffraction, 1st ed., CRC Press, Boca Raton, FL, 2005, p. 161.10.1201/9780203402818 ↗
29. S.J. Lewis and C.E. Truman: J. Phys. D-Appl. Phys., 2010, vol. 43, p. 265501.10.1088/0022-3727/43/26/265501 ↗
30. O. Engler and V. Randle: Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping, 2nd ed., CRC Press, Boca Raton, FL, p. 153.
31. W.F. Hosford: The Mechanics of Crystals and Textured Polycrystals, 20th ed., Oxford University Press, New York, NY, pp. 36–42.
32. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps: the Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, UK, 1982.
33. A.S. Argon: Physical Metallurgy, Eds. Robert W. Cahn and Peter Haasen, 4th ed., Elsevier, Atlanta, GA, p. 1999.
34. F. Groisbock: J. Mater. Sci., 1992, vol. 27, pp. 4373-80.10.1007/BF00541569 ↗
35. F. Groisbock and R. Ebner: Z. Metallk., 1991, vol. 82, pp. 435-41.
36. J.W. Martin: Micromechanisms in Particle-Hardened Alloys, Cambridge University Press, Cambridge, UK, p. 43.
37. M.E. Kassner: Fundamentals of Creep in Metals and Alloys, 1st ed., Elsevier, Atlanta, GA, pp. 151–69.10.1016/B978-0-08-099427-7.00001-3 ↗
38. A.J. Allen, M.A.M. Bourke, S. Dawes, M.T. Hutchings, and P.J. Withers: Acta Metall. Mater., 1992, vol. 40, pp. 2361-73.10.1016/0956-7151(92)90155-8 ↗