Fatigue crack growth mechanisms at the microstructure scale in Al-Si-Mg cast alloys: Mechanisms in regions II and III
Source abstract
Abstract
The fatigue crack growth behavior in Regions II and III of crack growth was investigated for hypoeutectic and eutectic Al-Si-Mg cast alloys. To isolate and establish the mechanistic contributions of characteristic microstructural features (dendritic α-Al matrix, eutectic phases, Mg-Si strengthening precipitates), alloys with various Si content/morphology, grain size level, and matrix strength were studied; the effect of secondary dendrite arm spacing (SDAS) was also assessed. In Regions II and III of crack growth, the observed changes in the fracture surface appearance were associated with changes in crack growth mechanisms at the microstructural scale (from a linear advance predominantly through primary α-Al to a tortuous advance exclusively through Al-Si eutectic Regions). The extent of the plastic zone ahead of the crack tip was successfully used to explain the changes in growth mechanisms. The fatigue crack growth tests were conducted on compact tension specimens under constant stress ratio,R=0.1, in ambient conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. M.J. Couper, A.E. Neeson, and J.R. Griffiths:Fatigue Fract. Eng. Mater. Struct., 1990, vol. 13 (3), pp. 213–27.10.1111/j.1460-2695.1990.tb00594.x ↗
2. Q.G. Wang, D. Apelian, and D.A. Lados:J. Light Met., 2001, vol. 1 (1), pp. 73–84.10.1016/S1471-5317(00)00008-0 ↗
3. H. Jiang, P. Bowen, and J.F. Knott:J. Mater. Sci., 1999, vol. 34, pp. 719–25.10.1023/A:1004560510632 ↗
4. B. Skallerud, T. Iveland, and G. Harkegard:Eng. Fract. Mech., 1993, vol. 44 (6), pp. 857–74.10.1016/0013-7944(93)90108-5 ↗
5. J.A. Odegard and K. Pedersen:SAE Technical Publication No. 940811, SAE, Warrendale, PA, 1994, pp. 25–32.
6. J.C. Ting and F.V. Lawrence, Jr.:Fatigue Fract. Eng. Mater. Struct., 1993, vol. 16 (6), pp. 631–47.10.1111/j.1460-2695.1993.tb00108.x ↗
7. A. Wickberg, G. Gustafsson, and L.E. Larsson:SAE Technical Publication No. 840121, SAE, Warrendale, PA, 1984.
8. C. Nyahumwa, N.R. Green, and J. Campbell:AFS Trans., 1998, vol. 106, pp. 215–23.
9. K. Shiozawa, Y. Tohda, and S.-M. Sun:Fatigue Fract. Eng. Mater. Struct., 1997, vol. 20 (2), pp. 237–47.10.1111/j.1460-2695.1997.tb00281.x ↗
10. B. Zhang, W. Chen, and D.R. Poirier:Fatigue Fract. Eng. Mater. Struct., 2000, vol. 23, pp. 417–23.10.1046/j.1460-2695.2000.00299.x ↗
11. S. Gungor and L. Edwards:Fatigue Fract. Eng. Mater. Struct., 1993, vol. 16 (4), pp. 391–403.10.1111/j.1460-2695.1993.tb00095.x ↗
12. D.A. Lados, D. Apelian, and A.M. de Figueredo:Advances in Aluminum Casting Technology II, Proc. Materials Solutions, M. Tiryakioglu and J. Campbell, eds., ASM, Metals Park, OH, 2002, pp. 185–96.
13. Q.G. Wang, D. Apelian, and D.A. Lados:J. Light Met., 2001, vol. 1 (1), pp. 85–97.10.1016/S1471-5317(00)00009-2 ↗
14. S. Kumai, J. Hu, Y. Higo, and S. Nunomura:J. Jpn. Inst. Light Met., 1995, vol. 45 (4), pp. 198–203 (in Japanese).10.2464/jilm.45.198 ↗
15. S. Kumai, S. Aoki, S.-W. Han, and A. Sato:Mater. Trans., JIM, 1999, vol. 40 (7), pp. 685–91.10.2320/matertrans1989.40.685 ↗
16. M.J. Caton, J.W. Jones, J.M. Boileau, and J.E. Allison:Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3055–68.10.1007/s11661-999-0216-4 ↗
17. D.A. Lados and D. Apelian:Mater. Sci. Eng., A, 2004, vol. A385, pp. 200–11.
18. K.S. Chan, P. Jones, and Q. Wang:Mater. Sci. Eng., A, 2003, vol. A341, pp. 18–34.10.1016/S0921-5093(02)00196-X ↗
19. K. Gall, N. Yang, M. Horstemeyer, D.L. McDowell, and J. Fan:Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3079–88.10.1007/s11661-999-0218-2 ↗
20. F.T. Lee, J.F. Major, and F.H. Samuel:AFS Trans., 1996, vol. 104, pp. 785–95.
21. D.A. Lados, D. Apelian, and J.K. Donald:Acta Mater., 2006, vol. 54 (6), pp. 1475–86.10.1016/j.actamat.2005.11.019 ↗
22. D.A. Lados, D. Apelian, P.C. Paris, and J.K. Donald:Int. J. Fatigue, 2005, vol. 27 (10–12), pp. 1463–72.10.1016/j.ijfatigue.2005.06.013 ↗
23. J.K. Shang, W. Yu, and R.O. Ritchie:Mater. Sci. Eng., A, 1988, vol. A102, pp. 181–92.10.1016/0025-5416(88)90573-3 ↗
24. Y. Sugimura and S. Suresh:Metall. Mater. Trans. A, 1992, vol. 23A, pp. 2231–42.10.1007/BF02646016 ↗
25. D.A. Lados and D. Apelian:Eng. Fract. Mech., 2006, vol. 73 (4), pp. 435–55.10.1016/j.engfracmech.2005.08.010 ↗
26. R.C. McClung and H. Sehitoglu:Eng. Fract. Mech., 1989, vol. 33, pp. 237–71.10.1016/0013-7944(89)90027-1 ↗
27. K.E. Petersen:Proc. IEEE, 1982, vol. 70 (5), pp. 420–57.10.1109/PROC.1982.12331 ↗
28. B. Stark: inMEMS Reliability Assurance Guidelines for Space Applications, ch. 4,Material Properties, JPL Publication 99-1, NASA, Pasadena, CA, 1999, pp. 49–68.
29. S.M. Spiering:Acta Mater., 2000, vol. 48, pp. 179–96.10.1016/S1359-6454(99)00294-3 ↗
30. M. Horstemeyer:Microstructure Property Modeling in Design and Product Optimization for Cast Light Metals, USAMP-LMD 110 Project, AFS, Des Plaines, IL, 2001.
31. K. Gall, M.F. Horstemeyer, M. Van Schilfgaarde, and M.I. Baskes:J. Mech. Phys. Solids, 2000, vol. 48, pp. 2183–212.10.1016/S0022-5096(99)00086-1 ↗
32. D.K. Ward, W.A. Curtin, and Y. Qi:Aluminum-Silicon Interfaces and Nanocomposites: A Molecular Dynamics Study—Research on “Interfaces and Coatings,” General Motors-Brown University Collaborative Research Laboratory, Brown University, Providence, RI, 2004.
33. K.A. Peterson, I. Dutta, and M. Chen:J. Mater. Proc. Technol., 2004, vol. 145, pp. 99–108.10.1016/S0924-0136(03)00877-X ↗
34. S.Z. -Lu and A. Hellawell:Metall. Mater. Trans. A, 1987, vol. 18A, pp. 1721–33.
35. M. Shamsuzzoha and L.M. Hogan:J. Cryst. Growth, 1986, vol. 76, pp. 429–39.10.1016/0022-0248(86)90390-8 ↗
36. M.D. Dighe and A.M. Gokhale:Scripta Metall., 1997, vol. 37, pp. 1435–40.10.1016/S1359-6462(97)00277-7 ↗
37. J.A. Odegard: Ph.D. Thesis, Norwegian Institute of Technology, Trondheim, Norway, 1992.
38. A. Turnbull and E.R. de los Rios:Fatigue Fract. Eng. Mater. Struct., 1995, vol. 18 (11), pp. 1355–66.10.1111/j.1460-2695.1995.tb00861.x ↗
39. G.A. Osinkolu, G. Onofrio, and M. Marchionni:Mater. Sci. Eng., A, 2003, vol. A356, pp. 425–33.10.1016/S0921-5093(03)00156-4 ↗