journal article·2014-08Open access

Consolidation of Carbon Nanotube Reinforced Aluminum Matrix Composites by High-Pressure Torsion

Hamed Asgharzadeh, Soo-Hyun Joo, Hyoung Seop Kim

Abstract

Al-3 vol pct carbon nanotube (CNT) composites are fabricated by consolidation through high-pressure torsion (HPT) at room temperature. The densification behavior, microstructural evolution, and mechanical properties of Al/CNT composites are studied. The results show that density and microstructural homogeneity increase with increasing number of revolutions under a high pressure of 6 GPa. Substantial grain refinement is achieved after 10 turns of HPT with an average grain thickness of ~38 nm perpendicular to the compression axis of HPT. The Al/CNT composite shows a considerable increase in hardness and strength compared to the Al matrix. The strengthening mechanisms of the Al/CNT composite are found to be (i) grain refinement of Al matrix and (ii) Orowan looping. Raman spectroscopy and high-resolution transmission electron microscopy reveal that the structure of most of CNTs is changed during processing through mechanical milling and HPT.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. V.N. Popov: Mater. Sci. Eng. R, 2004, vol. 43, pp. 61-102.10.1016/j.mser.2003.10.001 ↗
2. D. Poirier, R. Gauvin and R.A.L. Drew: Compos. A, 2009, vol. 40, pp. 1482-1489.10.1016/j.compositesa.2009.05.025 ↗
3. J.Z. Liao and M.J. Tan: Powder Technol., 2011, vol. 208, pp. 42-48.10.1016/j.powtec.2010.12.001 ↗
4. C. He, N. Zhao, C. Shi, X. Du, J. Li, H. Li and Q. Cui: Adv. Mater., 2007, vol. 19, pp. 1128-1132.10.1002/adma.200601381 ↗
5. D.H. Nam, S.I. Cha, B.K. Lim, H.M. Park, D.S. Han and S.H. Hong: Carbon, 2012, vol. 50, pp. 2417-2423.10.1016/j.carbon.2012.01.058 ↗
6. H. Kwon, M. Estili, K. Takagi, T. Miyazaki and A. Kawasaki: Carbon, 2009, vol. 47, pp. 570-577.10.1016/j.carbon.2008.10.041 ↗
7. C. Suryanarayana: Prog. Mater. Sci., 2001, vol. 46, pp. 1-184.10.1016/S0079-6425(99)00010-9 ↗
8. H. Asgharzadeh, A. Simchi and H.S. Kim: Metall. Mater. Trans. A, 2011, vol. 42, pp. 816-824.10.1007/s11661-010-0510-1 ↗
9. H. Abdoli, H.R. Farnoush, H. Asgharzadeh and S.K. Sadrnezhaad: Powder Metall., 2011, vol. 54, pp. 24-29.10.1179/003258909X12573447241662 ↗
10. J.B. Fogagnolo, F. Velasco, M.H. Robert and J.M. Torralba: Mater. Sci. Eng. A, 2003, vol. 342, pp. 131-143.10.1016/S0921-5093(02)00246-0 ↗
11. C.L. Xu, B.Q. Wei, R.Z. Ma, J. Liang, X.K. Ma and D.H. Wu: Carbon, 1999, vol. 37, pp. 855-858.10.1016/S0008-6223(98)00285-1 ↗
12. R. Zhong, H. Cong and P. Hou: Carbon, 2003, vol. 41, pp. 848-851.10.1016/S0008-6223(02)00427-X ↗
13. L. Jiang, Z. Li, G. Fan, L. Cao and D. Zhang: Carbon, 2012, vol. 50, pp. 1993–98.10.1016/j.carbon.2011.12.057 ↗
14. A.M.K. Esawi, K. Morsi, A. Sayed, M. Taher, S. Lanka: Compos. Sci. Technol., 2010, vol. 70, pp. 2237-2241.10.1016/j.compscitech.2010.05.004 ↗
15. D.H. Nam, Y.K. Kim, S.I. Cha and S.H. Hong: Carbon, 2012, vol. 50, pp. 4809-4814.10.1016/j.carbon.2012.06.005 ↗
16. A.M. Al-Qutub, A. Khalil, N. Saheb and A.S. Hakeem: Wear, 2013, vol. 297, pp. 752-761.10.1016/j.wear.2012.10.006 ↗
17. L. Ci, Z. Ryu, N.Y. Jin-Phillipp and M. Rühle: Acta Mater., 2006, vol. 54, pp. 5367-5375.10.1016/j.actamat.2006.06.031 ↗
18. R. Derakhshandeh and A Jenabali Jahromi: Mater. Des., 2011, vol. 32, pp. 3377–88.10.1016/j.matdes.2011.02.015 ↗
19. P. Quang, Y.G. Jeong, S.C. Yoon, S.H. Hong and H.S. Kim: J. Mater. Process. Tech., 2007, vol. 187-188, pp. 318-320.10.1016/j.jmatprotec.2006.11.116 ↗
20. D. Lahiri, S.R. Bakshi, A.K. Keshri, Y. Liu and A. Agarwal: Mater. Sci. Eng. A, 2009, vol. 523, pp. 263-270.10.1016/j.msea.2009.06.006 ↗
21. S. Salimi, H. Izadi and A. P. Gerlich: J. Mater. Sci., 2011, vol. 46, pp. 409-415.10.1007/s10853-010-4855-z ↗
22. H. Izadi and A.P. Gerlich: Carbon, 2012, vol. 50, pp. 4744-4749.10.1016/j.carbon.2012.06.012 ↗
23. Z.Y. Liu, B.L. Xiao, W.G. Wang and Z.Y. Ma: Carbon, 2012, vol. 50, pp. 1843-1852.10.1016/j.carbon.2011.12.034 ↗
24. S.-H. Joo, S.C. Yoon, C.S. Lee, D.H. Nam, S.H. Hong and H.S. Kim: J. Mater. Sci., 2010, vol. 45, pp. 4652-4658.10.1007/s10853-010-4382-y ↗
25. T. Tokunaga, K. Kaneko and Z. Horita: Mater. Sci. Eng. A, 2008, vol. 490, pp. 300-304.10.1016/j.msea.2008.02.022 ↗
26. D.C. Patil, S. A. Kori, K. Venkateswarlu, G. Das, S.N. Alhajeri and T.G. Langdon: J. Mater. Sci., 2013, vol. 48, pp. 4773-4779.10.1007/s10853-012-6969-y ↗
27. A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893-979.10.1016/j.pmatsci.2008.03.002 ↗
28. Y. Cao, Y.B. Wang, R.B. Figueiredo, L. Chang, X.Z. Liao, M. Kawasaki, W.L. Zheng, S.P. Ringer, T.G. Langdon and Y.T. Zhu: Acta Mater., 2011, vol. 59, pp. 3903-3914.10.1016/j.actamat.2011.03.015 ↗
29. C. Casiraghi, A.C. Ferrari, and J. Robertson: Phys. Rev. B, 2005, vol. 72, pp. 085401/1–14.10.1103/PhysRevB.72.085401 ↗
30. H.J. Choi, J.H. Shin and D.H. Bae: Compos. A, 2012, vol. 43, pp. 1061-1072.10.1016/j.compositesa.2012.02.008 ↗
31. C.F. Deng, D.Z. Wang, X.X. Zhang and A.B. Li: Mater. Sci. Eng. A, 2007, vol.444, pp. 138-145.10.1016/j.msea.2006.08.057 ↗
32. R.B. Figueiredo, P.H.R. Pereira, M.T.P. Aguilar, P.R. Cetlin and T.G. Langdon: Acta Mater., 2012, vol. 60, pp. 3190-3198.10.1016/j.actamat.2012.02.027 ↗
33. K. Edalati, R. Miresmaeili, Z. Horita, H. Kanayama and R. Pippan: Mater. Sci. Eng. A, 2011, vol. 528, pp. 7301- 7305.10.1016/j.msea.2011.06.031 ↗
34. P. Jenei, E.Y. Yoon, J. Gubicza, H.S. Kim, J.L. Lábár and T. Ungár: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4690-4695.10.1016/j.msea.2011.02.066 ↗
35. A.P. Zhilyaev, K. Oh-ishi, T.G. Langdon and T.R. McNelley: Mater. Sci. Eng. A, 2005, vol. 410-411, pp. 277-280.10.1016/j.msea.2005.08.044 ↗
36. M. Kawasaki, S.N. Alhajeri, C. Xu and T.G. Langdon: Mater. Sci. Eng. A, 2011, vol. 529, pp. 345-351.10.1016/j.msea.2011.09.039 ↗
37. C. Xu, Z. Horita and T.G. Langdon: Acta Mater., 2008, vol. 56, pp. 5168-5176.10.1016/j.actamat.2008.06.036 ↗
38. C. Xu, Z. Horita and T.G. Langdon: Acta Mater., 2007, vol. 55, pp. 203-212.10.1016/j.actamat.2006.07.029 ↗
39. H. Li, A. Misra, Y. Zhu, Z. Horita, C.C. Koch and T.G. Holesinger: Mater. Sci. Eng. A, 2009, vol. 523, pp. 60-64.10.1016/j.msea.2009.05.031 ↗
40. H. Asgharzadeh, A. Simchi and H.S. Kim: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4897-4905.10.1016/j.msea.2010.04.031 ↗
41. A.S. Argon and P. Haasen: Acta Metall. Mater., 1993, vol. 41, pp. 3289-3306.10.1016/0956-7151(93)90058-Z ↗
42. R.Z. Valiev, Y.V. Ivanisenko, E.F. Rauch and B. Baudelet: Acta Mater., 1996, vol. 44, pp. 4705-4712.10.1016/S1359-6454(96)00156-5 ↗
43. M. Zehetbauer and V. Seumer: Acta Metall. Mater., 1993, vol. 41, pp. 577-588.10.1016/0956-7151(93)90088-A ↗
44. X.G. Qiao, N. Gao and M.J. Starink: Philos. Mag., 2012, vol. 92, pp. 446-470.10.1080/14786435.2011.616865 ↗
45. R. George, K.T. Kashyap, R. Rahul and S. Yamdagni: Scripta Mater., 2005, vol. 53, pp. 1159-1163.10.1016/j.scriptamat.2005.07.022 ↗
46. R. Vogt, Z. Zhang, Y. Li, M. Bonds, N.D. Browning, E.J. Lavernia and J.M. Schoenung: Scripta Mater., 2009, vol. 61, pp. 1052-1055.10.1016/j.scriptamat.2009.08.025 ↗
47. T. Tokunaga, K. Kaneko, K. Sato, and Z. Horita: Scripta Mater., 2008, vol. 58, pp. 735-738.10.1016/j.scriptamat.2007.12.010 ↗
48. H. Asgharzadeh, A. Simchi and H.S. Kim: Mater. Charact., 2013, vol. 75, pp. 108-114.10.1016/j.matchar.2012.10.007 ↗
49. E. Orowan: Z Phys., 1934, vol. 89, pp. 634-659.10.1007/BF01341480 ↗
50. T.H. Courtney: Mechanical behavior of materials. Singapore: McGraw-Hill Book Co.; 2000.
51. M.A. Meyers, A. Mishra and D.J. Benson: Prog. Mater. Sci., 2006, vol. 51, pp. 427-556.10.1016/j.pmatsci.2005.08.003 ↗
52. H.J. Choi, J.H. Shin and D.H. Bae: Compos. Sci. Technol., 2011, vol. 71, pp. 1699-1705.10.1016/j.compscitech.2011.07.013 ↗
53. K. Prashantha, J. Soulestin, M.F. Lacrampe, P. Krawczak, G. Dupin and M. Claes: Compos. Sci. Technol., 2009, vol. 69, pp. 1756-1763.10.1016/j.compscitech.2008.10.005 ↗