journal article·2002-09

The production of ultrafine ferrite during hot torsion testing of a 0.11 wt pct C steel

P. J. Hurley, B. C. Muddle, P. D. Hodgson

Publisher page

Abstract

Ultrafine ferrite grain sizes were produced in a 0.11C-1.6Mn-0.2Si steel by torsion testing isothermally at 675 °C after air cooling from 1250 °C. The ferrite was observed to form intragranularly beyond a von Mises equivalent tensile strain of approximately 0.7 to 0.8 and the number fraction of intragranular ferrite grains continued to increase as the strain level increased. Ferrite nucleated to form parallel and closely spaced linear arrays or “rafts” of many discrete ultrafine ferrite grains. It is shown that ferrite nucleates during deformation on defects developed within the austenite parallel to the macroscopic shear direction (i.e., dynamic strain-induced transformation). A model austenitic Ni-30Fe alloy was used to study the substructure developed in the austenite under similar test conditions as that used to induce intragranular ferrite in the steel. It is shown that the most prevalent features developed during testing are microbands. It is proposed that high-energy jogged regions surrounding intersecting microbands provide potential sites for ferrite nucleation at lower strains, while at higher strains, the walls of the microbands may also act as nucleation sites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. R.K. Gibbs, P.D. Hodgson, and B.A. Parker: Morris E. Fine Symp., P.K. Liaw, J.R. Weertman, H.L. Marcus, and J.S. Santner, eds. TMS, Warrendale, PA, 1991, pp. 73–81.
2. R. Priestner and P.D. Hodgson: Mater. Sci. Technol., 1992, vol. 8, pp. 849–54.10.1179/mst.1992.8.10.849 ↗
3. R. Kaspar, J.S. Disti, and O. Pawelski: Steel Res., 1988, vol. 59, pp. 421–25.10.1002/srin.198801535 ↗
4. R. Kaspar, P. Flub, and O. Pawelski: Steel Res., 1989, vol. 60, pp. 566–70.10.1002/srin.198901704 ↗
5. F.H. Samuel, S. Yue, J.J. Jonas, and K.R. Barnes: Iron Steel Inst. Jpn. Int., 1990, vol. 30, pp. 216–25.10.2355/isijinternational.30.216 ↗
6. R.A. Grange: Metall. Trans., 1971, vol. 2, pp. 65–78.10.1007/BF02662639 ↗
7. H. Abrams: in Mechanical Working and Steel Processing XXI, ISSAIME, Warrendale, PA, 1984, pp. 423–45.
8. M. Tokizane, K. Ameyama, and K. Takao: Scripta Metall., 1988, vol. 22, pp. 697–701.10.1016/S0036-9748(88)80185-6 ↗
9. A. Najafi-Zadeh, J.J. Jonas, and S. Yue: Metal. Trans. A, 1992, vol. 23A, pp. 2607–17.10.1007/BF02658064 ↗
10. R. Pandi and S. Yue: Iron Steel Inst. Jpn. Int., 1994, vol. 34, pp. 270–79.10.2355/isijinternational.34.270 ↗
11. T. Ishikawa, Y. Nomiyama, Y. Hagiwara, H. Yoshikawa, S. Oshita, and H. Mabuchi: OMAE ′95: Proceedings of the 14th International Conference on Offshore Mechanics and Artic Engineering, June 18–22, 1995, Copenhagen, Denmark, ASME International, 1995, New York, NY, vol. 3, pp. 357–63.
12. G.B. Olson: Encyclopedia of Materials Science and Engineering, Pergamon Press, Oxford, United Kingdom, 1985, pp. 2929–31.
13. T. Tanaka, N. Tabata, T. Hatomura, and C. Shiga: in Microalloying 75, M. Korchynsky, ed., Union Carbide Corp., New York, NY, 1977, pp. 107–19.
14. R. Priestner and E. de los Rios: Met. Technol., 1980, pp. 309–16.10.1179/030716980803287170 ↗
15. R. Priestner: in Thermomechanical Processing of Austenite, A.J. DeArdo, G.A. Ratz, and P.J. Wray, eds., TMS-AIME, Warrendale, PA, 1982, pp. 455–66.
16. R.K. Amin and F.B. Pickering: in Thermomechanical Processing of Microalloyed Austenite, A.J. DeArdo, G.A. Ratz, and P.J. Wray, eds., TMS-AIME, Warrendale, PA, 1982, pp. 377–403.
17. H. Yada, Y. Matsumura, and K. Nakajima: “Ferritic Steel Having Ultra-Fine Grains and a Method for Producing the Same,” Nippon Steel Corporation, Tokyo, Japan, Patent No. 4466842, 1984.
18. Y. Matsumura and H. Yada: Trans. Iron Steel Inst. Jpn., 1987, vol. 27, pp. 492–98.10.2355/isijinternational1966.27.492 ↗
19. H. Yada, Y. Matsumura, and T. Senuma: Thermec ′88—Int. Conf. on Physical Metallurgy of Thermomechanical Processing of Steels and Other Metals, I. Tamura, ed., Tokyo, 1988, The Iron and Steel Institute of Japan, Tokyo, Japan, 1988, pp. 200–07.
20. J.H. Beynon, R. Gloss, and P.D. Hodgson: Mater. Forum, 1992, vol. 16, pp. 37–42.
21. L. Sunghak, K. Dongil, K.L. Young, and K. Ohjoon: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1093–1100.
22. P.D. Hodgson, M.R. Hickson, and R.K. Gibbs: Mater. Sci. Forum, 1998, vols. 284–286, pp. 63–73.10.4028/www.scientific.net/MSF.284-286.63 ↗
23. P.J. Hurley, B.C. Muddle, and P.D. Hodgson: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1507–17.10.1007/s11661-001-0238-z ↗
24. W. Charnock and J. Nutting: Met. Sci. J, 1967, vol. 1, pp. 123–27.10.1016/0036-9748(67)90027-0 ↗
25. P.J. Hurley, B.C. Muddle, P.D. Hodgson, C.H.J. Davies, B.P. Wynne, P. Cizek, and M.R. Hickson: Mater. Sci. Forum, 1998, vols. 284–286, pp. 159–66.10.4028/www.scientific.net/MSF.284-286.159 ↗
26. H. Weiss, D.H. Skinner, and J.R. Everett: J. Phys. E: Scient. Inst. Ser. 2, 1973, vol. 6, pp. 709–14.10.1088/0022-3735/6/8/012 ↗
27. D.S. Fields and W.A. Backofen: ASTM Proc., 1957, vol. 57, pp. 1259–72.
28. P. Cizek, D.G. McCulloch, and B.A. Parker: Proc. 13th Biennial Conf. of the Australian Society of Electron Microscopy-ACEM-13, D. Allen, J. Barry, T. Bostrom, L.M. Hogan, and M.S. Pennisi, eds., Gold Coast, Australia, The Australian Society of Electron Microscopy, Sydney, Australia, 1994, p. 110.
29. P.J. Hurley and P.D. Hodgson: Materials Science and Technology, 2001, vol. 17, pp. 1360–68.10.1179/026708301101509566 ↗
30. D.A. Hughes and W.D. Nix: Mater. Sci. Eng. A, 1989, vol. A122, pp. 153–72.10.1016/0921-5093(89)90627-8 ↗
31. H. Inagaki: Trans. Iron Steel Inst. Jpn., 1983, vol. 23, pp. 1059–67.10.2355/isijinternational1966.23.1059 ↗
32. R. Kaspar, U. Lotter, and C. Beigus: Steel Res., 1994, vol. 65, pp. 242–47.10.1002/srin.199401065 ↗