Ductile Fracture Prediction in Rotational Incremental Forming for Magnesium Alloy Sheets Using Combined Kinematic/Isotropic Hardening Model
Source abstract
Abstract
To predict the ductile fracture of a magnesium alloy sheet when using rotational incremental forming, a combined kinematic and isotropic hardening law is implemented and evaluated from the histories of the ductile fracture value (I) using a finite element analysis. Here, the criterion for a ductile fracture, as developed by Oyane (J. Mech. Work. Technol., 1980, vol. 4, pp. 65–81), is applied via a user material based on a finite element analysis. To simulate the effect of the large amount of heat generation at elements in the contact area due to the friction energy of the rotational tool-specimen interface on the equivalent stress-strain evolution in incremental forming, the Johnson–Cook (JC) model was applied and the results compared with equivalent stress-strain curves obtained from tensile tests at elevated temperatures. The finite element (FE) simulation results for a ductile fracture were compared with the experimental results for a (80 mm × 80 mm × 25 mm) square shape with a 45 and 60 deg wall angle, respectively, and a (80 mm × 80 mm × 20 mm) square shape with a 70 deg wall angle. The trends of the FE simulation results agreed quite well with the experimental results. Finally, the effects of the process parameters, i.e., the tool down-step and tool radius, on the ductile fracture value and FLC at fracture (FLCF) were also investigated using the FE simulation results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. R.S. Busk: Magnesium Production Design, Marcel Dekker Inc., New York, NY, 1986, p. 13.
2. E. Aghion, B. Bronfin, and D. Eliezer: J. Mater. Process. Technol., 2001, vol. 117, pp. 381–85.10.1016/S0924-0136(01)00779-8 ↗
3. M.T. Perez-Prado and O.A. Ruano: Scripta Mater., 2002, vol. 46, pp. 149–55.10.1016/S1359-6462(01)01212-X ↗
4. N.A. El-Mahallawy, M.A. Taha, E. Pokora, and F. Klein: J. Mater. Process. Technol., 1998, vol. 73, pp. 125–38.10.1016/S0924-0136(97)00221-5 ↗
5. B.H. Hu, K.K. Tong, X.P. Niu, and I. Pinwill: J. Mater. Process. Technol., 2000, vol. 105, pp. 128–33.10.1016/S0924-0136(00)00546-X ↗
6. E. Doege and K. Droder: J. Mater. Process. Technol., 2001, vol. 115, pp. 14–19.10.1016/S0924-0136(01)00760-9 ↗
7. H. Friedrich and S. Schumann: J. Mater. Process. Technol., 2001, vol. 117, pp. 276–81.10.1016/S0924-0136(01)00780-4 ↗
8. H. Takuda, T. Enami, K. Kubota, and N. Hatta: J. Mater. Process. Technol., 2000, vol. 101, pp. 281–86.10.1016/S0924-0136(00)00484-2 ↗
9. S. Lee, Y.H. Chen, and J.Y. Wang: J. Mater. Process. Technol., 2002, vol. 124, pp. 19–24.10.1016/S0924-0136(02)00038-9 ↗
10. E. Doege and K. Droder: J. Mater. Process. Technol., 1997, vols. 7–8, pp. 19–23.10.1051/mattech/199785070019 ↗
11. M. Kohzu, F. Yoshida, and H. Somekawa: Mater. Trans., 2001, vol. 42, pp. 1273–76.10.2320/matertrans.42.1273 ↗
12. S.W. Won, S.G. Oh, K. Osakada, J.G. Park, and Y.S. Kim: 2004 Proc. Spring Conf. Kor. Soc. Technol. Plasticity, 2004, pp. 53–56.
13. D.K. Choo, S.W. Oh, J.H. Lee, and C.G. Kang: Trans. Mater. Process., 2005, vol. 14, pp. 628–34.10.5228/KSPP.2005.14.7.628 ↗
14. H. Iseki and H. Kumon: J. Jpn. Soc. Technol. Plasticity, 1994, vol. 35 (406), pp. 1336–41.
15. L. Fratini, G. Ambrogio, R. Di Lorenzo, L. Filice, and F. Micari: Ann. CIRP, 2004, vol. 53 (1), pp. 207–10.10.1016/S0007-8506(07)60680-5 ↗
16. Y.H. Kim and J.J. Park: J. Mater. Process. Technol., 2002, vols. 130–131, pp. 42–46.10.1016/S0924-0136(02)00788-4 ↗
17. G. Ambrogio, I. Costantino, L. De Napoli, L. Filice, L. Fratini, and M. Muzzupappa: J. Mater. Process. Technol., 2004, vols. 153C–154C, pp. 501–07.10.1016/j.jmatprotec.2004.04.139 ↗
18. T.J. Kim and D.Y. Yang: Int. J. Mech. Sci., 2000, vol. 42, pp. 1271–86.10.1016/S0020-7403(99)00047-8 ↗
19. J.G. Park, J.H Kim, N.K. Park, and Y.S. Kim: Metall. Mater. Trans. A., 2010, vol. 41A, pp. 97–105.10.1007/s11661-009-0043-7 ↗
20. B.P.P.A. Gouveia, J.M.C. Rodrigues, P.A.F. Martins: Int. J. Mech. Sci., 1996, vol. 38, pp. 361–72.10.1016/0020-7403(95)00069-0 ↗
21. D. Hibbit, B. Karlsson, and P. Sorensen: ABAQUS User’s Manual, Ver. 6.5.1. Abaqus Inc., Pawtucket, RI, 2003.
22. M. Oyane, T. Sato, K. Okimoto, and S. Shima: J. Mech. Work. Technol., 1980, vol. 4, pp. 65–81.10.1016/0378-3804(80)90006-6 ↗
23. H.W. Swift: J. Mech. Phys. Solids., 1952, vol. 1, pp. 1–18.10.1016/0022-5096(52)90002-1 ↗
24. G.J. Johnson and W.H. Cook: Proc. 7th Int. Symp. on Ballistics, The Hague, 1983, pp. 541–47.
25. S.G. Hibbins: in Light Metals 1998 Metaux Legers, M. Sahoo and C.C. Fradet, eds., TMS-CIM, Calgary, AB, Canada, 1998, pp. 265–80.
26. S.E. Clift, P. Hartley, C.E.N. Sturgess, and G.W. Rowe: Int. J. Mech. Sci, 1990, vol. 32, pp. 1–17.10.1016/0020-7403(90)90148-C ↗
27. M. Toda, T. Miki, S. Yanagimoto, and K. Osakada: J. Jpn. Soc. Technol. Plasticity, 1988, vol. 29, pp. 971–76.
28. H. Takuda, K. Mori, H. Fujimoto, and N. Hatta: J. Mater. Process. Technol., 1996, vol. 60, pp. 291–96.10.1016/0924-0136(96)02344-8 ↗