Microstructural Refinement of Bainite and Martensite for Enhanced Strength and Toughness in High-Carbon Low-Alloy Steel
Source abstract
Abstract
This study attempts to determine the scope and extent of microstructural refinement through complete/partial recrystallization of prior cold deformed ferrite during austenitizing (1223 K (950 °C), 15 minutes) and/or austempering (543 K (270 °C), 30 minutes) followed by water quenching to obtain ultrafine bainitic sheaves along with thin martensitic plates in SAE 52100 steel. The volume fraction and sheaf/plate dimension (thickness/length) of bainitic ferrite and martensite were determined by optical and scanning/transmission electron microscopy studies coupled with compositional microanalysis. Marginal improvement in the tensile strength and significant improvement in the impact properties is obtained at an optimum level of prior cold deformation by tension in comparison to that recorded in austempered condition without prior deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. H. Burrier: ASM Handbook Properties and Selection of Iron Steels and High Performance Alloys, ASM International, Materials Park, OH, 1987, vol. 1, pp. 380–88.
2. H. Bomas, T.T. Linkewitz, and P. Mayr: Haerterei-Technische Mitteilungen, 2002, vol. 57, pp. 190–98.
3. J. Chakraborty, D. Bhattacharjee, and I. Manna: Scripta Mater., 2008, vol. 59, pp. 247–50.10.1016/j.scriptamat.2008.03.023 ↗
4. J. Chakraborty, D. Bhattacharjee, and I. Manna: Scripta Mater., 2009, vol. 61, pp. 604–07.10.1016/j.scriptamat.2009.05.035 ↗
5. C.H. Young and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1994, vol. 10, pp. 209–14.10.1179/mst.1994.10.3.209 ↗
6. J. Barford and W.S. Owen: Met. Sci. Heat Treatment, 1962, vol. 4, pp. 359–60.10.1007/BF00814454 ↗
7. M. Umemoto, K. Horiuchi and I. Tamura: Tetsu-to-Hagané, 1982, vol. 68, pp. 461–70.10.2355/tetsutohagane1955.68.3_461 ↗
8. L.W. Graham and H.J. Axon: J. Iron Steel Inst., 1959, vol. 191, pp. 361–65.
9. A. Matsuzaki and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1999, vol. 15, pp. 518–22.10.1179/026708399101506210 ↗
10. A.K. De, J.G. Speer, and D.K. Matlok: Adv. Mater. Processes, 2003, vol. 161, pp. 27–30.
11. H.K.D.H. Bhadeshia: Bainite in Steels, 2nd ed., Maney Publishing, London, 2001, pp. 147–54.
12. B.D. Cullity: Elements of X-Ray Diffraction, Addison-Wesley, Reading, MA, 1959, pp. 391–96.
13. T. Yokota, C. Garcıa-Mateo, and H.K.D.H. Bhadeshia: Scripta Mater., 2004, vol. 51, pp. 767–70.10.1016/j.scriptamat.2004.06.006 ↗
14. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., CRC Press, Broken Sound Parkway NW, Boca Raton, 2001, p. 46.
15. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–80.10.1557/JMR.1992.1564 ↗
16. C. Li and J.L. Wang: J. Mater. Sci., 1993, vol. 28, pp. 2112–18.10.1007/BF00367570 ↗
17. F. Hengerer, U. Brockmuller, and P.O. Sorstrom: Creative Use of Bearing Steels, ASTM Special Technical Publication-1195, ASTM, Philadelphia, PA, 1993, pp. 21–33.
18. Q. Furnémont, M. Kempf, P.J. Jacques, M. Goken, and F. Delannay: Mater. Sci. Technol., 2002, vol. 328, pp. 26–32.
19. P.J. Jacques, Q. Furnémont, F. Lani, T. Pardoen, and F. Delannay: Acta Mater., 2007, vol. 55, pp. 3681–93.10.1016/j.actamat.2007.02.029 ↗