journal article·2008-05

Microsegregation during Solidification of an Al-Cu Binary Alloy at Largely Different Cooling Rates (0.01 to 20,000 K/s): Modeling and Experimental Study

Galina Kasperovich, Thomas Volkmann, Lorenz Ratke, Dieter Herlach

Publisher page

Abstract

Microsegregation in the Al 4 wt pct Cu alloy was investigated experimentally in a large range of cooling rates from 0.01 to 20,000 K/s using different solidification techniques. The microstructure was modeled using two-dimensional (2-D) pseudo-front tracking (PFT) developed by Jacot and co-workers. The experimentally determined amount of nonequilibrium eutectics increases with the cooling rate in the range 0.01 to 3 K/s and then decreases in the range 20 to 20,000 K/s. The fraction of eutectic calculated from the 2-D PFT model shows not only the same tendency, but also agrees quantitatively very well with the experiments over the range of cooling rates. It can also be explained qualitatively how the observed in terms of coarsening of the secondary dendrite arms and the back diffusion in the way both depend on the local solidification time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. M. Rappaz, W.J. Boettinger: Acta Mater., 1999, vol. 47 (11), pp. 3205–1910.1016/S1359-6454(99)00188-3 ↗
2. A.B. Michael, M.B. Bever: Trans. AIME J. Met., 1954, vol. 202, pp. 47–56
3. M.A. Taha, N.A. El-Mhallawy, R.M. Hamouda: Mater. Des., 2002, vol. 23, pp. 195–20010.1016/S0261-3069(01)00058-9 ↗
4. J.A. Sarreal, G.J. Abbaschian: Metall. Trans. A, 1986, vol. 17A, pp. 2063–7310.1007/BF02645003 ↗
5. I.I. Novikov, V.S. Zolotarevskii: Dendritnaja Likvatsiya v Splavakh (Dendritic Solidification in Alloys), Nauka, Moskow, 1966
6. D. Eskin, Q. Du, D. Ruvalcaba, L. Katgerman: Mater. Sci. Eng., 2005, vol. A405, pp. 1–1010.1016/j.msea.2005.05.105 ↗
7. Q. Du, D.G. Eskin, A. Jacot: Acta Mater., 2007, vol. 55 (5), pp. 1523–3210.1016/j.actamat.2006.10.035 ↗
8. V.R. Voller: J. Cryst. Growth, 2001, vol. 226, pp. 562–6810.1016/S0022-0248(01)01411-7 ↗
9. V.R. Voller, C. Beckermann: Metall. Mater. Trans. A, 1999, vol. 30A, 2183–8910.1007/s11661-999-0030-z ↗
10. S. Kobayashi: J. Cryst. Growth, 1988, vol. 88, p. 8710.1016/S0022-0248(98)90010-0 ↗
11. C.Y. Wang, C. Beckermann: Mater. Sci. Eng., 1993, vol. A171, pp. 199–21110.1016/0921-5093(93)90407-6 ↗
12. I. Ohnaka: Trans. ISIJ, 1986, vol. 26, p. 104510.2355/isijinternational1966.26.1045 ↗
13. L. Nastac, D.M. Stefanescu: Metall. Trans. A, 1993, vol. 24A, p. 210710.1007/BF02666344 ↗
14. A. Jacot, M. Rappaz: Acta Mater., 2002, vol. 50, pp. 1909–2610.1016/S1359-6454(01)00442-6 ↗
15. Q. Du, A. Jacot: Acta Mater., 2005, vol. 53, pp. 3479–9310.1016/j.actamat.2005.04.004 ↗
16. CALCOSOFT, User Manual, Calcom ESI and Swiss Federal Institute of Technology, Lausanne, Switzerland, 2004.
17. J. Alkemper, S. Sous, C. Stöcker, L. Ratke: J. Cryst. Growth, 1998, vol. 191, pp. 252–6010.1016/S0022-0248(98)00114-6 ↗
18. S. Sous, L. Ratke: Z. Metallkd., 2005, vol. 96 (4), pp. 362–69
19. J. Alkemper, L. Ratke, and S. Sous: Proc. 4th Decennial Conf. on Solidification Processing, J. Beech and H. Jones, eds., Sheffield University, Sheffield, United Kingdom, 1997, pp. 463–67
20. J. Fricke: J. Non-Cryst. Solids, 1992, vol. 145, pp. 1–25910.1016/S0022-3093(05)80419-3 ↗
21. P.H. Tewari, A.J. Hunt, J.G. Lieber, K. Lufftus, and J. Fricke: Aerogels, Proc. Physics 6, Springer-Verlag, Berlin, 1986
22. S. Steinbach, L. Ratke: Scripta Mater., 2004, vol. 50, pp. 1135–3810.1016/j.scriptamat.2004.01.023 ↗
23. S. Steinbach, L. Ratke: Mater. Sci. Eng., 2005, vols. A 413–A414, pp. 200–0410.1016/j.msea.2005.09.010 ↗
24. D.M. Herlach, R.F. Cochrane, I. Egry, H.J. Fecht: Int. Mater. Rev., 1993, vol. 38 (6), pp. 273–34710.1179/095066093790326267 ↗
25. F. Gillessen: Forschungsbericht DFVLR, DLR-FB, Köln, 1989, pp. 89–32
26. S. Reutzel, T. Volkmann, J. Gao, J. Strohmenger, D.M. Herlach: in Solidification and Crystallization, D.M. Herlach, ed., Wiley-VCH, Weinheim, Germany, 2004, pp. 239–4910.1002/3527603506.ch26 ↗
27. P.S. Grant, B. Cantor, L. Katgerman: Acta Metall. Mater., 1993, vol. 41, pp. 3097–310810.1016/0956-7151(93)90039-U ↗
28. AnalySIS©, Soft Imaging System GmbH, 1986–2002
29. R. Mehrabian, M.C. Flemings: Metall. Trans., 1970, vol. 1, pp. 455–6410.1007/BF02811556 ↗
30. C. Beckermann: Int. Mater. Rev., 2002, vol. 47 (5), pp. 243–6110.1179/095066002225006557 ↗
31. L. Ratke and S. Steinbach: Solidification Processing, Proc. 5th Decennial Int. Conf. on Solidification Processing, Howard Jones, ed., University of Sheffield, Sheffield, United Kingdom, 2007, pp. 14–17
32. H.-J. Diepers, C. Beckermann, I. Steinbach: Acta Mater., 1999, vol. 47, pp. 3663–7810.1016/S1359-6454(99)00239-6 ↗
33. M. Hainke: Ph.D. Thesis, University of Erlangen–Nuremberg, Germany, 2004
34. S. Steinbach and L. Ratke: Proc. 18th Eur. Sounding Rocket & Balloon Programme Symp., W. Herfs and A. Wilson, eds., Visby, Sweden, 2007, ESA-SP 647, Special Publications No 647, ESA Publications Division, Noordwijk, The Netherlands, pp. 373–78