The Effect of Cooling Rate, and Cool Deformation Through Strain-Induced Transformation, on Microstructural Evolution and Mechanical Properties of Microalloyed Steels
Source abstract
Abstract
In this article, a detailed study was conducted to evaluate the microstructural evolution and mechanical properties of microalloyed steels processed by thermomechanical schedules incorporating cool deformation. Cool deformation was incorporated into a full scale simulation of hot rolling, and the effect of prior austenite conditioning on the cool deformability of microalloyed steels was investigated. As well, the effect of varying cooling rate, from the end of the finishing stage to the cool deformation temperature, 673 K (400 °C), on mechanical properties and microstructural evolution was studied. Transmission electron microscopy (TEM) analysis, in particular for Nb containing steels, was also conducted for the precipitation evaluation. Results show that cool deformation greatly improves the strength of microalloyed steels. Of the several mechanisms identified, such as work hardening, precipitation, grain refinement, and strain-induced transformation (SIT) of retained austenite, SIT was proposed, for the first time in microalloyed steels, to be a significant factor for strengthening due to the deformation in ferrite. Results also show that the effect of precipitation in ferrite for the Nb bearing steels is greatly overshadowed by SIT at room temperature.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. C.O.I. Tamura, T. Tanaka, and H. Sekine: Thermomechanical Processing of High-Strength Low-Alloy Steels, Butterworth and Co., London, 1988, pp. 179–86.
2. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, University Press, Cambridge, United Kingdom, 1997, pp. 213–61.
3. S. Shanmugam, R.D.K. Misra, J. Hartmann, and S.G. Jansto: Mater. Sci. Eng. A, 2006, vol. 441 (1–2), pp. 215–29.10.1016/j.msea.2006.08.017 ↗
4. A. Fatehi, J. Calvo, A.M. Elwazri, D.Q. Bai, and S. Yue: Materials Science and Technology 2007 Conference Proceedings, September 2007, Detroit, MI, M.J. Merwin, ed., 2007, pp. 243–53.
5. J. Calvo, A. Fatehi, A.M. Elwazri, and S. Yue: Rio Pipeline Conf. 2007, Rio de Janeiro, Brazil, Oct. 2–4, 2007, pp. 1–8.
6. A. Fatehi: M.Sc. Thesis, McGill University, Montreal, 2008.
7. S.H. Mousavi Anijdan and S. Yue: Materials Science and Technology 2009, Conference Proceedings, October 2009, Pittsburgh, PA, 2009, pp. 1329–36.
8. A.M. Elwazri, R. Varano, S. Yue, D.Q. Bai, and F. Siciliano: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2929–36.10.1007/s11661-005-0066-7 ↗
9. A.M. Elwazri, D.Q. Bai, F. Siciliano, and S. Yue: Can. Metall. Q., 2006, vol. 45 (4), pp. 441–50.10.1179/cmq.2006.45.4.441 ↗
10. J.J. Yi, K.J. Yu, I.S. Kim, and S.J. Kim: Metall. Trans. A, 1983, vol. 14A, pp. 1497–1504.10.1007/BF02664834 ↗
11. S. Sangal, N.C. Goel, C. Naresh, and K. Tangri: Metall. Trans. A, 1985, vol. 16A, pp. 2023–29.10.1007/BF02662403 ↗
12. N.C. Goel, S. Sangal, and K. Tangri: Metall. Trans. A, 1985, vol. 16A, pp. 2013–21.10.1007/BF02662402 ↗
13. A. Di Chiro: Ph.D. Thesis, McGill University, Montreal, 1997.
14. N.C. Goel, J.P. Chakravarty, and K. Tangri: Metall. Trans. A, 1987, vol. 18A, pp. 5–9.10.1007/BF02646215 ↗
15. Y. Sakuma, D. Matlock, and G. Krauss: Metall. Trans. A, 1992, vol. 23A, pp. 1233–41.10.1007/BF02665054 ↗
16. D.S. Bott, L.F.G. De Souza, J.C.G. Teixeira, and P.R. Rios: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 443–54.10.1007/s11661-005-0315-9 ↗
17. H. Huang, O. Matsumura, and T. Furukawa: Mater. Sci. Technol., 1994, vol. 10, pp. 621–26.10.1179/mst.1994.10.7.621 ↗
18. A.P. Singh, D. Sengupta, S. Jha, M.P. Yallasiri, and N.S. Mishra: Mater. Sci. Technol., 2004, vol. 20, pp. 1317–25.10.1179/026708304225022296 ↗
19. J.S. Park and Y.K. Lee: Scripta Mater., 2007, vol. 56 (3), pp. 225–28.10.1016/j.scriptamat.2006.10.007 ↗
20. G. Krauss and S.W. Thompson: ISIJ Int., 1995, vol. 35 (8), pp. 937–45.10.2355/isijinternational.35.937 ↗
21. P.A. Manohar, T. Chandra, and C.R. Killmore: ISIJ Int., 1996, vol. 36 (12), pp. 1486–93.10.2355/isijinternational.36.1486 ↗
22. P. Cizek, B. Wynne, C. Davies, B. Muddle, and P. Hodgson: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1331–49.10.1007/s11661-002-0059-8 ↗
23. H.S. Zurob: Ph.D. Thesis, McMaster University, Hamilton, 2003.
24. R.C. Sharma, V.K. Lakshmanan, and J.S. Kirkaldy: Metall. Trans. A, 1984, vol. 15A, pp. 545–53.10.1007/BF02644979 ↗
25. C.P. Reip, S. Shanmugam, and R.D.K. Misra: Mater. Sci. Eng. A, 2006, vol. 424 (1–2), pp. 307–17.10.1016/j.msea.2006.03.026 ↗
26. S. Shanmugam, N.K. Ramisetti, R.D.K. Misra, J. Hartmann, and S.G. Jansto: Mater. Sci. Eng. A, 2008, vol. 478 (1–2), pp. 26–37.10.1016/j.msea.2007.06.003 ↗
27. R.D.K. Misra, G.C. Weatherly, J.E. Hartmann, and A.J. Boucek: Mater. Sci. Technol., 2001, vol. 17, pp. 1119–29.10.1179/026708301101511040 ↗
28. R. Misra, K. Tenneti, G. Weatherly, and G. Tither: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2341–51.10.1007/s11661-003-0297-4 ↗
29. S. Shanmugam, N.K. Ramisetti, R.D.K. Misra, T. Mannering, D. Panda, and S. Jansto: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 335–43.10.1016/j.msea.2007.01.054 ↗
30. C. Zhou and R. Priestner: ISIJ Int., 1996, vol. 36 (11), pp. 1397–1405.10.2355/isijinternational.36.1397 ↗
31. S.H. Mousavi Anijdan: Ph.D. Thesis, McGill University, Montreal, 2010.
32. M. Charleux, W.J. Poole, M. Militzer, and A. Deschamps: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1635–47.10.1007/s11661-001-0142-6 ↗
33. P. Maugis, D. Gendt, S. Lanteri, and P. Barges: Defect and Diffusion Forum, Y. Limoge and J.L. Bocquet, eds., Scitec Publication, Switzerland, 2001, vols. 194–199, pp. 1767–72.10.4028/www.scientific.net/DDF.194-199.1767 ↗
34. F. Perrard, P. Donnadieu, A. Deschamps, and P. Barges: Philos. Mag., 2006, vol. 86 (27), pp. 4271–84.10.1080/14786430500479720 ↗
35. P.A. Manohar and T. Chandra: ISIJ Int., 1998, vol. 38 (7), pp. 766–74.10.2355/isijinternational.38.766 ↗
36. R. Priestner and P.D. Hodgson: Mater. Sci. Technol., 1992, vol. 8, pp. 849–54.10.1179/mst.1992.8.10.849 ↗
37. I.A. Yakubtsov and J.D. Boyd: Mater. Sci. Technol., 2001, vol. 17, pp. 296–301.10.1179/026708301773002491 ↗
38. S. Thompson, D. Colvin, and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1557–71.10.1007/BF02649815 ↗
39. Y. Sakuma, O. Matsumura, and H. Takechi: Metall. Trans. A, 1991, vol. 22A, pp. 489–98.10.1007/BF02656816 ↗
40. Y. Sakuma, D. Matlock, and G. Krauss: Metall. Trans. A, 1992, vol. 23A, pp. 1221–32.10.1007/BF02665053 ↗
41. J. Mahieu, J. Maki, B.C. De. Cooman, and S. Claessens: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 2573–80.10.1007/s11661-002-0378-9 ↗
42. I.B. Timokhina, P.D. Hodgson, and E.V. Pereloma: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2442–54.10.1007/s11661-007-9258-7 ↗
43. J. Calvo, I.H. Jung, A.M. Elwazri, D. Bai, and S. Yue: Mater. Sci. Eng. A, 2009, vol. 520 (1–2), pp. 90–96.10.1016/j.msea.2009.05.027 ↗
44. J. Cao, Q.Yung, and Q. Liu: J. Mater. Sci., 2007, vol. 42, pp. 10080–84.10.1007/s10853-007-2000-4 ↗