journal article·2000-04

Grain-boundary chemistry and intergranular corrosion in alloy 825

Y. -M. Pan, D. S. Dunn, G. A. Cragnolino, N. Sridhar

Publisher page

Abstract

Alloy 825, a former candidate material for radioactive high-level waste containers, was investigated to assess its thermal stability and the time-temperature conditions for sensitization. Alloy specimens with a carbon content of 0.01 wt pct in the mill-annealed (MA) and solution-annealed (SA) conditions were studied after thermal exposure to temperatures ranging from 600 °C to 800 °C for periods of up to 1000 hours. Sensitization was evaluated by using corrosion tests that were correlated to grainboundary chemistry analyses. Sensitized microstructures were found to contain M23C6-type carbides and a chromium-depleted region in the vicinity of the grain boundaries. Thermal aging at 700 °C for 100 hours resulted in the highest sensitization. While heat treatment at 640 °C showed a progressive development of sensitization with time, healing was found to occur after aging at 800 °C for 100 hours. The degree of sensitization, quantified by an equivalent chromium-depleted-zone size, correlates well with the corrosion rate in the nitric acid test. Thermodynamic models were used to calculate the interfacial chromium concentration, chromium depletion profile, and the depleted-zone width. Comparisons between experimental measurements and model calculations indicate that reliable prediction depends on the selection of key model parameters.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. E.L. Hall and C.L. Briant: Metall. Trans. A, 1984, vol. 15A, pp. 793–811.10.1007/BF02644554 ↗
2. S.M. Bruemmer and L.A. Charlot: Scripta Metall., 1986, vol. 20, pp. 1019–24.10.1016/0036-9748(86)90428-X ↗
3. G.S. Was and R.M. Kruger: Acta Metall., 1985, vol. 33, pp. 841–54.10.1016/0001-6160(85)90108-7 ↗
4. G.S. Was: Corrosion, 1990, vol. 46, pp. 319–30.10.5006/1.3585110 ↗
5. E.L. Hall and C.L. Briant: Metall. Trans. A, 1985, vol. 16A, pp. 1225–36.10.1007/BF02670327 ↗
6. J.J. Kai, G.P. Yu, C.H. Tsai, M.N. Liu, and S.C. Yao: Metall. Trans. A, 1989, vol. 20A, pp. 2057–67.10.1007/BF02650292 ↗
7. E.L. Raymond: Corrosion, 1968, vol. 24, pp. 180–88.10.5006/0010-9312-24.6.180 ↗
8. V. Cihal: Intergranular Corrosion of Steels and Alloys, Mater. Sci. Monographs, Vol. 18, Elsevier Pub. Co, New York, NY, 1984.
9. C. Stawstrom and M. Hillert: J. Iron Steel Inst., 1969, vol. 207, pp. 77–85.
10. C.S. Tedmon, Jr., D.A. Vermilyea, and J.H. Rosolowski: J. Electrochem. Soc., 1969, vol. 118, pp. 192–202.10.1149/1.2407966 ↗
11. S.M. Bruemmer: Corrosion, 1990, vol. 46, pp. 698–709.10.5006/1.3585171 ↗
12. G. Cragnolino and N. Sridhar: “Long-Term Stability of High-Level Nuclear Waste Container Materials: I—Thermal Stability of Alloy 825,” Report No. CNWRA 93-003, Center for Nuclear Waste Regulatory Analyses, San Antonio, TX, 1993.
13. ASTM Annual Book of Standards, ASTM Standard A 262-93a, ASTM, Philadelphia, PA, 1993, vol. 3.02, pp. 1–16.
14. ASTM Annual Book of Standards, ASTM Standard G 61, ASTM, Philadelphia, PA, 1993, vol. 3.02, pp. 231–35.
15. N. Sridhar, G. Cragnolino, and D.S. Dunn: “Experimental Investigations of Failure Processes of High-Level Nuclear Waste Container Materials,” Report No. CNWRA 95-010, Center for Nuclear Waste Regulatory Analyses, San Antonio, TX, 1995.
16. J.I. Goldstein and D.B. Williams: Quantitative Microanalysis with High Spatial Resolution, The Metals Society, London, 1981, pp. 5–14.
17. M.A. Streicher: Intergranular Corrosion of Stainless Alloys, ASTM STP 656, ASTM, Philadelphia, PA, 1978, pp. 3–84.10.1520/STP34842S ↗
18. M.H. Brown: Corrosion, 1969, vol. 25, pp. 438–43.10.5006/0010-9312-25.10.438 ↗
19. M.A. Shaikh, M. Iqbal, M. Ahmad, J.I. Akhtar, and K.A. Shoaib: J. Mater. Sci. Lett., 1992, vol. 11, pp. 1009–11.10.1007/BF00729911 ↗
20. Y.-M. Pan, N. Sridhar, D.S. Dunn, and G.A. Cragnolino: J. Mater. Sci. Lett., 1996, vol. 15, pp. 522–24.10.1007/BF00241142 ↗
21. D.D. Pruthi, M.S. Anand, and R.P. Agarwala: J. Nucl. Mater., 1977, vol. 64, pp. 206–10.10.1016/0022-3115(77)90026-5 ↗
22. A.R. Paul, K.N.G. Kaimal, M.C. Naik, and S.R. Dharwadkar: J. Nucl. Mater., 1994, vol. 217, pp. 75–81.10.1016/0022-3115(94)90306-9 ↗
23. J.M. Park, W.S. Ryu, and Y.H. Kang: J. Nucl. Mater., 1994, vol. 209, pp. 221–25.10.1016/0022-3115(94)90255-0 ↗
24. M. Hillert and C. Qiu: Metall. Trans. A, 1991, vol. 22A, pp. 2187–98.10.1007/BF02664985 ↗
25. K. Natesan and T.F. Kassner: Metall. Trans., 1973, vol. 4, pp. 2557–66.10.1007/BF02644258 ↗
26. F.D. Richardson: J. Iron Steel Inst., 1953, vol. 175, pp. 33–51.
27. G.S. Was, H.H. Tischner, and R.M. Latanision: Metall. Trans. A, 1981, vol. 12A, pp. 1397–408.10.1007/BF02643684 ↗