journal article·2001-05

Creep-rupture behavior of a directionally solidified nickel-base superalloy

J. T. Guo, C. Yuan, H. C. Yang, V. Lupinc, M. Maldini

Publisher page

Abstract

The creep-rupture behavior of the directionally solidified (DS) nickel-base superalloy DZ17G has been investigated over a wide stress range of 60 to 950 MPa at high temperature (923 to 1323 K). In this article, the detailed creep deformation and fracture mechanisms at constant load have been studied. The results show that all creep curves exhibit a short primary and a dominant accelerated creep stage, which results in higher ductility of DS superalloy DZ17G compared to the conventionally cast alloy. From the creep parameters and transmission electron microscopy (TEM) observations, it is suggested that the dominant creep deformation mechanism has a change from gamma prime particles shearing by matrix dislocations in high stress region to dislocation climb process in low stress region. It is found that the fracture mode of DS superalloy DZ17G is transgranular, and it is controlled by the propagation rate of creep cracks initiated at both surface and inner microstructure discontinuities. The creep rupture data follows the Monkman-Grant relationship under all the explored test conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. F.L. VerSynder and R.W. Guard: Trans. ASM, 1960, vol. 32, pp. 485–93.
2. F.L. VerSynder and M.E. Shank: Mater. Sci. Eng., 1970, vol. 6, pp. 213–47.10.1016/0025-5416(70)90050-9 ↗
3. M. McLean: Directionally Solidified Materials for High Temperature Service, TMS, London, 1983, p. 180.
4. D.N. Duhl: in Superalloys II, C.T. Sims, N.S. Stoloff, and W.C. Hagel, eds., John Wiley and Sons, New York, NY, 1987, p. 189.
5. F.R.N. Nabarro and H.L. de Villiers: The Physics of Creep, Taylor and Francis, London, 1995, p. 83.
6. G.R. Leverant, B.H. Kear, and J.M. Oblak: Metall. Trans. A, 1973, vol. 4, pp. 355–62.10.1007/BF02649637 ↗
7. R.A. Mackay and R.D. Maier: Metall. Trans. A, 1982, vol. 13A, pp. 1747–54.10.1007/BF02647830 ↗
8. M.V. Nathal and L.J. Ebert: Metall. Trans. A, 1985, vol. 16A, pp. 27–39.
9. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1992, vol. 40, pp. 1–30.10.1016/0956-7151(92)90195-K ↗
10. H. Rouault-Rogez, M. Dupeux, and M. Ignat: Acta Metall. Mater., 1994, vol. 42, pp. 3137–48.10.1016/0956-7151(94)90411-1 ↗
11. G. Eggeler and A. Dlouhy: Acta Mater., 1997, vol. 45, pp. 4251–62.10.1016/S1359-6454(97)00084-0 ↗
12. D. Sieborger and U. Glatzel: Acta Mater., 1999, vol. 47, pp. 397–406.10.1016/S1359-6454(98)00378-4 ↗
13. R.C. Reed, N. Matan, D.C. Cox, M.A. Rist, and C.M.F. Rae: Acta Mater., 1999, vol. 47, pp. 3367–81.10.1016/S1359-6454(99)00217-7 ↗
14. N. Matan, D.C. Cox, P. Carter, M.A. Rist, C.M.F. Rae, and R.C. Reed: Acta Mater., 1999, vol. 47, pp. 1549–63.10.1016/S1359-6454(99)00029-4 ↗
15. K. Kakehi: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 421–30.10.1007/s11661-000-0279-8 ↗
16. E.W. Ross and K.S. O’Hara: in Superalloy 1992, S.D. Antolovich, R.W. Stusrud, R.A. Mackay, D.L. Anton, T. Khan, R.D. Kissinger, and D.L. Klarstrom, eds., TMS, Warrendale, PA, 1992, p. 257.
17. A.D. Cetel and D.N. Duhl: in Superalloy 1992, R.D. Kissinger et al., eds., TMS, Warrendale, PA, 1992, p. 287.
18. K. Harris, G.L. Erickson, and R.E. Schwer: in Superalloy 1992, R.D. Kissinger et al., eds., TMS, Warrendale, PA, 1992, p. 297.
19. A. Nomoto, M. Yaguehi, and T. Ogata: Key Eng. Mater., 2000, vols. 171–174 pp. 569–76.10.4028/www.scientific.net/KEM.171-174.569 ↗
20. J.P. Dennison, P.D. Holmes, and B. Wilshire: Mater. Sci. Eng., 1978, vol. 33, pp. 35–48.10.1016/0025-5416(78)90151-9 ↗
21. B. Burton, I.G. Grossland, and G.W. Greenwood: Met. Sci., 1980, vol. 14, pp. 134–36.10.1179/030634580790426346 ↗
22. J.C. Gibeling and W.D. Nix: Mater. Sci. Eng., 1980, vol. 45, pp. 123–35.10.1016/0025-5416(80)90218-9 ↗
23. C. Yuan, J.T. Guo, H.C. Yang, and S.H. Wang: Scripta Mater., 1998, vol. 39, pp. 991–97.10.1016/S1359-6462(98)00255-3 ↗
24. K.R. Williams and B. Wilshire: Mater. Sci. Eng., 1977, vol. 28, pp. 289–96.10.1016/0025-5416(77)90183-5 ↗
25. Guo Jianting, D. Ranucci, E. Picco, and P.M. Strocchi: Metall. Trans. A, 1983, vol. 14A, pp. 2329–35.10.1007/BF02663308 ↗
26. R.B. Scarlin: Metall. Trans. A, 1976, vol. 7A, pp. 1535–41.10.1007/BF02656396 ↗
27. R.S. Mishra, S.P. Singh, A.M. Sirramaurthy, and M.C. Pandey: Mater. Sci. Technol., 1995, vol. 11, pp. 341–45.10.1179/mst.1995.11.4.341 ↗
28. F.C. Monkman and N.J. Grant: Proc. ASTM, 1956, vol. 56, pp. 593–620.
29. V. Lupinc: in Creep and Fatigue in High Temperature Alloys, J. Bressers, ed., Applied Science Pub. Ltd., London, 1981, p. 7.
30. G.L. Erickson, K. Harris, and R.E. Schwer: TMS-AIME Meeting, Houston, TX, Mar. 1985.