Heat-Transfer Coefficient and In-Cavity Pressure at the Casting-Die Interface during High-Pressure Die Casting of the Magnesium Alloy AZ91D
Source abstract
Abstract
The present article deals with the application of a new measurement method to determine the heat-transfer coefficient (HTC) and the heat flux density at the casting-die interface during high-pressure die casting (HPDC) and solidification of the magnesium AZ91D alloy. The main measurements during the trial included velocity and the position of the piston that delivers the metal into the die, the pressure in the die cavity and at the tip of the piston, the alloy surface temperature, and the die temperature at different depths from the surface of the die. The temperature data were analyzed using an inverse method to determine the HTC at the casting-die interface during solidification. This article examines in detail the influence of the piston velocity and in-cavity pressure on heat transfer at the casting-die interface during casting and solidification of the magnesium AZ91D alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Materials Engineering and Processing · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. K.U. Kainer: Magnesium Alloys and Their Applications, Wiley-VCH, Weinheim, Germany, 200010.1002/3527607552 ↗
2. M. Prates, H. Biloni: Metall. Trans., 1972, vol. 3, pp. 1501–1010.1007/BF02643039 ↗
3. A. Hamasaiid, G. Dour, M. Dargusch, T. Loulou, C. Davidson, and G. Savage: in Modeling of Casting, Welding, and Advanced Solidification XI, TMS, Warrendale, PA, Opio, France, 2006, pp. 1213–16
4. S. Gulizia, M.Z. Jahedi, E.D. Doyle: Surf. Coat. Technol., 2001, vol. 140 (3), pp. 200–0510.1016/S0257-8972(01)01037-4 ↗
5. G. Dour, M. Dargusch, C. Davidson, A. Nef: J. Mater. Process. Technol., 2005, vol. 169 (2), pp. 223–3310.1016/j.jmatprotec.2005.03.026 ↗
6. V. Davies: Br. Foundryman, 1980, vol. 73 (12), pp. 331–34
7. K. Ho, R.D. Pehlke: AFS Trans., 1983, vol. 91 pp. 689–98
8. K. Ho, R.D. Pehlke: Metall. Mater. Trans. B, 1985, vol. 16B pp. 585–9410.1007/BF02654857 ↗
9. T.S.P. Kumar, K.N. Prabhu: Metall. Mater. Trans. B, 1991, vol. 22B, pp. 717–2710.1007/BF02679028 ↗
10. P. Schmidt: Ph.D. Thesis, Royal Institute of Technology, Stockholm, 1994
11. F. Michel, P.R. Louchez, F.H. Samuel: AFS Trans., 1995, vol. 103 pp. 275–83
12. W.D. Griffiths: Metall. Mater. Trans. B, 1999, vol. 30B, pp. 473–8210.1007/s11663-999-0081-y ↗
13. S. Broucaret, A. Michrafy, G. Dour: J. Mater. Process Technol., 2001, vol. 110, pp. 211–1710.1016/S0924-0136(00)00881-5 ↗
14. C.P. Hallam, W.D. Griffiths: Metall. Mater. Trans. B, 2004, vol. 35B pp. 721–3310.1007/s11663-004-0012-x ↗
15. C.W. Nelson: 6th SDCE Int. Die Casting Congr., Cleveland, OH, 1970, paper no. 63
16. C.W. Nelson: Giesserei-Praxis, 1972, vol. 19, pp. 341–49
17. S. Bounds, K. Davey, S. Hinduja: J. Manuf. Sci. E.-Trans. ASME, 2000, vol. 122, pp. 90–9910.1115/1.538890 ↗
18. S. Hong, D.G. Backman, R. Mehrabian: Metall. Trans. B, 1979, vol. 10B pp. 299–30110.1007/BF02652479 ↗
19. J.V. Beck: Nucl. Eng. Des., 1968, vol. 7 pp. 170–7810.1016/0029-5493(68)90058-7 ↗
20. T.D. Fadale, A.V. Nenarokomov, A.F. Emery: Int. J. Heat Mass Transfer, 1995, vol. 38 (3), pp. 511–1810.1016/0017-9310(94)00175-U ↗
21. J.R. Shenefelt, R. Luck, R.P. Taylor, J.T. Berry: Int. J. Heat Mass Transfer, 2002, vol. 45 (1), pp. 67–7410.1016/S0017-9310(01)00129-6 ↗
22. B. Bourouga, V. Goizet, J.-P. Bardon: Int. J. Therm. Sci., 2000, vol. 39 (1), pp. 96–10910.1016/S1290-0729(00)00192-6 ↗
23. T.D. Fadale, A.V. Nenarokomov, A.F. Emery: J. Heat Transfer, 1995, vol. 117 pp. 373–7910.1115/1.2822532 ↗
24. G. Dour, M. Dargusch, C. Davidson: Int. J. Heat Mass Transfer, 2006, vol. 49 (11–12), pp. 1773–8910.1016/j.ijheatmasstransfer.2005.10.045 ↗
25. Quartz Cavity Pressure Sensor (Aluminium), 6175a2, Kistler Instrument Corporation, Armhest, NY, Available at: http://www.intertechnology.com/Kistler/pdfs/Pressure_Model_6175A2.pdf
26. M.S. Dargusch, G. Wang, N. Schauer, C.M. Dinnis, G. Savage: Int. J. Cast Met. Res., 2005, vol. 18 (1), pp. 47–5410.1179/136404605225022784 ↗
27. M.S. Dargusch, G. Dour, N. Schauer, C.M. Dinnis, G. Savage: J. Mater. Process. Technol., 2006, vol. 180 (1–3), pp. 37–4310.1016/j.jmatprotec.2006.05.001 ↗
28. K. Rogers and G. Savage: in North American Die Casting Association Congr., Cincinnati, OH, 2001, pp. T01–T92
29. The Temperature Handbook, Omega Ltd., 2002, Available at: http://www.omega.fr/pdf/temperature/Z/zsection.asp
30. Thermocoax: Quel Thermocouple Choisir?, Lyon, France, 2002, pp. 2–31
31. F. Medjedoub: PhD Thesis, École des Mines d’Albi-Carmaux, Albi, France, 2004
32. A. Hamasaiid, M.S. Dargusch, C. Davidson, R.S. Tovar, T. Loulou, F. Rezaï-Aria, G. Dour: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1303–1610.1007/s11661-007-9145-2 ↗
33. G. Savage, M. Gershenzon, and K.J. Rogers: in North American Die Casting Association Congress, Cincinnati, OH, 2001, pp. T01–53
34. R. Helenius, O. Lohne, L. Arnberg, H.I. Laukli: Mater. Sci. Eng., A, 2005, vol. 413–414 pp. 52–5510.1016/j.msea.2005.08.166 ↗
35. A. Hamasaiid: Ph.D. Thesis, Université Paul Sabatier (France) and University of Queensland (Australia), Brisbane, Albi, 2007