journal article·2004-10

Microindentation of aluminum

Fuqian Yang, Lingling Peng, Kenji Okazaki

Publisher page

Abstract

A simple model was developed to correlate the plastic energy dissipated in microindentation to the applied load and the average dislocation density underneath the indentation. The model predicted that the plastic energy dissipated in a loading-unloading cycle was proportional to the 3/2 power of the indentation load as well as to the 3/4 power of the average dislocation density underneath the indentation. The experimental results from the microindentation tests of the annealed Al and the equal channel angular extrusion (ECAE)-deformed Al supported the proposed model. A variation of the microhardness to the various sections of the ECAE-deformed Al was observed, suggesting that the Al rod was deformed to varying degrees of plastic deformation after only a single ECAE pass. The hardness of the most severely deformed sample showed the highest hardness, and the annealed sample showed the lowest hardness. Also, plastic recovery was observed in the indentation of the ECAE-deformed Al, which suggested a kind of Bauschinger effect took place.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Force Microscopy Techniques and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. J.S. Hayes, R. Keyte, and PB. Prangnel: Mater. Sci. Technol., 2000, vol. 16, pp. 1259–63.10.1179/026708300101507479 ↗
2. V.M. Segal, V.I. Reznikov, A.E. Drobyshevskiy, and V.I. Kopylov: Russ. Metall., 1981, vol. 1, pp. 99–105.
3. V.M. Segal: Mater. Sci. Eng., 1995, vol. A197, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
4. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1997, vol. 45, pp. 4733–41.10.1016/S1359-6454(97)00100-6 ↗
5. M. Furukawa, Z. Horita, M. Nemoto, and T.G. Langdon: J. Mater. Sci., 2001, vol. 36, pp. 2835–43.10.1023/A:1017932417043 ↗
6. K. Matsubara, Y. Miyahara, Z. Horita, and T.G. Langdon: Acta Mater., 2003, vol. 51, pp. 3073–84.10.1016/S1359-6454(03)00118-6 ↗
7. N.A. Smirnova, V.I. Levit, V.I. Pilyugin, R.I. Kuznetsov, L.S. Davydova, and V.A. Sazonova: Fiz. Met. Metalloved., 1986, vol. 61, pp. 1170–77.
8. K. Nakashima, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng., 2000, vol. A281, pp. 82–87.10.1016/S0921-5093(99)00744-3 ↗
9. R.Z. Valiev, D.A. Salimonenko, N.K. Tsenev, P.B. Berbon, and T.G. Langdon: Scripta Mater., 1997, vol. 37, 1945–50.10.1016/S1359-6462(97)00387-4 ↗
10. Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes, and T.G. Langdon: Acta Mater., 2000, vol. 48, pp. 3633–40.10.1016/S1359-6454(00)00182-8 ↗
11. H. Akamatsu, T. Fujinami, Z. Horita, and T.G. Langdon: Scripta Mater., 2001, vol. 44, pp. 759–64.10.1016/S1359-6462(00)00666-7 ↗
12. Q. Wei, T. Jiao, S.N. Mathaudhu, E. Ma, H.T. Hartwig, and K.T. Ramesh: Mater. Sci. Eng., 2003, vol. A358, pp. 266–72.10.1016/S0921-5093(03)00305-8 ↗
13. L. Cisar, Y. Yoshida, S. Kamado, Y. Kojima, and F. Watanabe: Mater. Trans., 2003, vol. 44, pp. 476–83.10.2320/matertrans.44.476 ↗
14. Z.A. Khan, U. Chakkingal, and P. Venugopal: J. Mater. Process Technol., 2003, vol. 135, pp. 59–67.10.1016/S0924-0136(02)01019-1 ↗
15. H.Z. Ding, H. Mughrabi, and H.W. Hoppel: Fatigue Fract. Eng. Mater., 2002, vol. 25, pp. 975–84.10.1046/j.1460-2695.2002.00564.x ↗
16. A. Vinogradov and S. Hashimoto: Adv. Eng. Mater., 2003, vol. 5, pp. 351–58.10.1002/adem.200310078 ↗
17. S. Kokubo: Sci. Rep. Tohoku Imperial Univ., 1932, vol. 21, pp. 256–62.
18. G. Sines and R. Carlson: ASTM Bull., 1952, vol. 180, pp. 35–40.
19. G.U. Oppel: Exp. Mech., 1964, vol. 21, pp. 135–40.10.1007/BF02322968 ↗
20. T.R. Simes, S.G. Mellor, and D.A. Hills: J. Strain Analysis, 1984, vol. 19, pp. 135–37.10.1243/03093247V192135 ↗
21. J.G. Swadener, B. Taljat, and G.M. Pharr: J. Mater. Res., 2001, vol. 16, pp. 2091–102.10.1557/JMR.2001.0286 ↗
22. H. Widersich: J. Met., 1963, vol. 15, pp. 423–28.
23. H. Conrad, K. Okazoki, V. Gadgil, and M. Jon: Electron Microscopy and Strength of Materials, University of California Press, Berkeley, CA, 1972, pp. 453–55.
24. F.R.N. Nabarro, Z.S. Basinski, and D.B. Holt: Adv. Phys., 1964, vol. 13, pp. 193–250.10.1080/00018736400101031 ↗
25. M.E. Kassner: J. Mater. Sci., 1990, vol. 25, pp. 1997–2003.10.1007/BF01045755 ↗
26. R.L. Jones and H. Conrad: TMS-AIME, 1969, vol. 245, pp. 779–84.
27. J.E. Bailey and P.B. Hirsch: Phil. Mag. 1960, vol. 5, pp. 485–90.10.1080/14786436008238300 ↗
28. G.I. Taylor: Proc. R. Soc., 1934, vol. A145, pp. 362–70.
29. M.F. Ashby: Phil. Mag., 1970, vol. 21, pp. 399–405.10.1080/14786437008238426 ↗
30. M.E. Kassner: Acta Mater., 2004, vol. 52, pp. 1–9.10.1016/j.actamat.2003.08.019 ↗
31. M.A. Meyers and K. Kumarchawla: Mechanical Behavior of Materials, Prentice-Hall, Inc., Upper Saddle River, NJ, 1998.
32. D.M. Marsh: Proc. R. Soc., 1964, vol. A279, pp. 420–30.
33. R. Hill: The Mathematical Theory of Plasticity, Clarendon Press, Oxford, UK, 1950.
34. K.L. Johnson: Contact Mechanics, Cambridge University Press, New York, NY, 1987.
35. H. Mecking: in Work Hardening in Tension and Fatigue, A.W. Thompson, ed., TMS, Warrendale, PA, 1977, p. 67.
36. L.L. Peng, F.Q. Yang, and K. Okazaki: in Ultrafine Grained Materials III, Y.T. Zhu, T.G. Langdon, R.Z. Valiev, S.L. Semiatin, D.H. Shin, and T.C. Lowe, eds., TMS, Warrendale, PA, 2004, pp. 535–41.
37. K. Tanaka: J. Mater. Sci., 1987, vol. 22, pp. 1501–10.10.1007/BF01233154 ↗
38. J.L. Hay, W.C. Oliver, A. Bolshakov, and G.M. Pharr: Mater. Res. Soc. Symp. Proc., 1998, vol. 522, pp. 101–06.10.1557/PROC-522-101 ↗
39. Y.T. Cheng and C.M. Cheng: Int. J. Solids Struct., 1999, vol. 36, pp. 1231–43.10.1016/S0020-7683(97)00349-1 ↗
40. G.E. Dieter: Mechanical Metallurgy, 2nd ed., McGraw-Hill, Inc., New York, NY, 1976, p. 392.
41. J.S. Field and M.V. Swain: J. Mater. Res., 1993, vol. 8, pp. 297–306.10.1557/JMR.1993.0297 ↗
42. F.Q. Yang, J.Y.Y. Zhou, V. Kordonski and S.D. Jacobs: J. Mater. Sci. Lett., 1996, vol. 15, pp. 1523–25.10.1007/BF00625011 ↗
43. W.D. Nix and H.J. Gao: J. Mech. Phys. Solids, 1998, vol. 46, pp. 411–25.10.1016/S0022-5096(97)00086-0 ↗
44. R. Rodriguez and I. Gutierrez: Mater. Sci. Eng., 2003, vol. A361, pp. 377–84.10.1016/S0921-5093(03)00563-X ↗