journal article·2004-05

Modeling of irregular eutectic microstructures in solidification of Al-Si alloys

M. F. Zhu, C. P. Hong

Publisher page

Abstract

A modified cellular automaton (MCA) model was developed and applied to simulate the evolution of solidification microstructures of both eutectic and hypoeutectic Al-Si alloys. The present MCA model considers the equilibrium and metastable equilibrium solidification processes in a multiphase system. It accounts for the aspects including the nucleation of a new phase, the growth of primary α dendrites and two eutectic solid phases from a single liquid phase, as well as the coupling between the phase transformation and solute redistribution in liquid. The effects of alloy composition and eutectic undercooling on eutectic morphology and eutectic nucleation mode were investigated. The simulated results were compared with those obtained experimentally.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. W.J. Boettinger, S.R. Coriell, A.L. Greer, A. Karma, W. Kurz, M. Rappaz, and R. Trivedi: Acta Mater., 2000, vol. 48, pp. 43–47.10.1016/S1359-6454(99)00287-6 ↗
2. D.J. Fisher and W. Kurz: Acta Metall., 1980, vol. 28, pp. 777–94.10.1016/0001-6160(80)90155-8 ↗
3. Q.Y. Liu, Q.C. Li, and Q.F. Liu: Acta Metall. Mater., 1991, vol. 39, pp. 2497–2502.10.1016/0956-7151(91)90064-8 ↗
4. P. Magnin, J.T. Mason, and R. Trivedi: Acta Metall. Mater., 1991, vol. 39, pp. 469–80.10.1016/0956-7151(91)90115-H ↗
5. S.C. Hansen and C.R. Loper, Jr.: CALPHAD, 2000, vol. 24, pp. 339–52.10.1016/S0364-5916(01)00009-8 ↗
6. R. Grugel and W. Kurz: Metall. Trans. A, 1987, vol. 18A, pp. 1137–42.10.1007/BF02668564 ↗
7. P. Magnin and W. Kurz: Acta Metall., 1987, vol. 35, pp. 1119–28.10.1016/0001-6160(87)90059-9 ↗
8. S.Z. Lu and A. Hellawell: JOM, 1995, Feb., pp. 38–40.
9. S.Z. Lu and A. Hellawell: Metall. Trans. A, 1987, vol. 18A, pp. 1721–33.
10. M.D. Hanna, S.Z. Lu, and A. Hellawell: Metall. Trans. A, 1984, vol. 15A, pp. 459–69.10.1007/BF02644969 ↗
11. G. Heiberg and L. Arnberg: J. Light Met., 2001, pp. 43–49.10.1016/S1471-5317(00)00005-5 ↗
12. A.K. Dahle, K. Nogita, J.W. Zindel, S.D. Mcdonald, and L.M. Hogan: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 949–60.10.1007/s11661-001-0352-y ↗
13. M. Rappaz and C.-A. Gandin: Acta Metall. Mater., 1993, vol. 41, pp. 345–60.10.1016/0956-7151(93)90065-Z ↗
14. C.-A. Gandin and M. Rappaz: Acta Metall. Mater., 1994, vol. 42, pp. 2233–46.10.1016/0956-7151(94)90302-6 ↗
15. I.S. Cho and C.P. Hong: Iron Steel Inst. Jpn., 1997, vol. 37, pp. 1098–1106.10.2355/isijinternational.37.1098 ↗
16. K.Y. Lee and C.P. Hong: Iron Steel Inst. Jpn. Int., 1997, vol. 37, pp. 38–46.10.2355/isijinternational.37.38 ↗
17. Y.H. Chang, S.M. Lee, K.Y. Lee, and C.P. Hong: Iron Steel Inst. Jpn. Int., 1998, vol. 38, pp. 63–70.10.2355/isijinternational.38.63 ↗
18. S.Y. Lee, S.M. Lee, and C.P. Hong: Iron Steel Inst. Jpn. Int., 2000, vol. 40, pp. 48–57.10.2355/isijinternational.40.48 ↗
19. M.F. Zhu and C.P. Hong: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 436–45.10.2355/isijinternational.41.436 ↗
20. M.F. Zhu, J.M. Kim, and C.P. Hong: Iron Steel Inst. Jpn. Int., 2001, vol. 41, pp. 992–98.10.2355/isijinternational.41.992 ↗
21. M.F. Zhu and C.P. Hong: Iron Steel Inst. Jpn. Int., 2002, vol. 42, pp. 520–26.10.2355/isijinternational.42.520 ↗
22. L.B. Sanchez and D.M. Stefanescu: Int. J. Cast Met. Res., 2002, vol. 15, pp. 251–56.10.1080/13640461.2003.11819492 ↗
23. M.F. Zhu, S. Nishido, and C.P. Hong: Int. J. Cast Met. Res., 2002, vol. 15, pp. 273–78.10.1080/13640461.2003.11819496 ↗
24. M.F. Zhu and C.P. Hong: Phys. Rev. B, 2002, vol. 66, p. 155428.10.1103/PhysRevB.66.155428 ↗
25. J. Tiaden: J. Cryst. Growth, 1999, vols. 198–199, pp. 1275–80.10.1016/S0022-0248(98)01009-4 ↗
26. R. Trivedi and W. Kurz: in Solidification Processing of Eutectic Alloys, D.M. Stefanescu, G.J. Abbaschian, and R.J. Bayuzick, eds., TMS, Warrendale, PA, 1988, pp. 3–34.
27. P. Thevoz: Ph.D. Thesis No. 765, Swiss Federal Institute of Technology, Lausanne, 1988.
28. L. Nastac: Proc. Modeling of Casting and Solidification Processes IV, C.P. Hong, J.K. Choi, and D.H. Kim, eds., Hanrimwon, Seoul, 2000, pp. 31–42.
29. W. Kurz, B. Giovanola, and R. Trivedi: Acta Metall., 1986, vol. 34, pp. 823–20.10.1016/0001-6160(86)90056-8 ↗
30. J.M. Liu, Y.H. Zhou, and B.L. Shang: J. Mater. Sci., 1992, vol. 27, pp. 2067–74.10.1007/BF01117919 ↗
31. P. Magnin and R. Trivedi: Acta Metall. Mater., 1991, vol. 39, pp. 453–67.10.1016/0956-7151(91)90114-G ↗