journal article·2004-08Open access

An eulerian finite-element model for determination of deformation state of a copper subjected to orthogonal cutting

A. Raczy, M. Elmadagli, W. J. Altenhof, A. T. Alpas

Abstract

An Eulerian finite-element (FE) model was developed to predict the stress and strain distributions in the material subjected to the orthogonal machining process. Metallographic sections taken from commercially pure copper samples and subjected to orthogonal cutting were examined to determine the local strain gradients generated in the material ahead of the cutting tool tip. Local flow stress values were estimated from the microhardness measurements. Experimental flow stress and equivalent plastic strain values were found to obey a Voce-type exponential relationship, which was used in the development of the material model for the numerical simulations. The sizes of both the primary deformation zone (350 µm) and the secondary deformation zone (50 µm) predicted by the numerical model were in agreement with the experimental observations. The experimental results showed that the equivalent strain was 3.65 in the material 50 µm directly ahead of the tool tip, which compared well with the numerically observed strain (3.50). According to the numerical observations, along the primary shear plane, the high tool tip stress of 410 MPa decreased to 260 MPa near the chip root. Numerical and experimental stress and strain distributions correlated well in terms of both magnitudes and distributions, indicating that the application of an Eulerian FE approach served to predict the deformation state of the material ahead of the tool tip successfully.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Advanced Surface Polishing Techniques · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. V. Piispanen: J. Appl. Phys., 1948, vol. 19, pp. 876–81.10.1063/1.1697893 ↗
2. M.E. Merchant: J. Appl. Phys., 1945, vol. 16, pp. 267–75.10.1063/1.1707586 ↗
3. M.E. Merchant: J. Appl. Phys., 1945, vol. 16, pp. 318–24.10.1063/1.1707596 ↗
4. R.F. Recht: J. Appl. Mech. Trans. ASME, 1964, vol. 31, pp. 189–93.10.1115/1.3629585 ↗
5. K. Okushima and K. Hitomi: J. Eng. Ind., 1961, vol. 83, pp. 545–56.10.1115/1.3664594 ↗
6. B.F. von Turkovich: J. Eng. Ind., 1970, vol. 92, pp. 151–57.10.1115/1.3427700 ↗
7. J.C. Lemaire and W.A. Backofen: Metall. Trans., 1973, vol. 3, pp. 477–81.
8. S. Ramalingam and J.T. Black: Metall. Trans., 1973, vol. 4, pp. 1103–12.10.1007/BF02645614 ↗
9. E. Ceretti, P. Fallbohmer, W.T. Wu, and T.R. Altan: J. Mater. Processing Technol., 1996, vol. 59, pp. 169–80.10.1016/0924-0136(96)02296-0 ↗
10. T.D. Marusich and M. Ortiz: Int. J. Num. Methods Eng., 1995, vol. 38, pp. 3675–94.10.1002/nme.1620382108 ↗
11. J.M. Huang and J.T. Black: J. Manufacturing Sci. E.-T. ASME, 1996, vol. 118, pp. 545–54.10.1115/1.2831066 ↗
12. B. Zhang and A. Bagchi: J. Eng. Ind., 1995, vol. 116, pp. 289–97.10.1115/1.2901944 ↗
13. K. Komvopoulos and S.A. Erpenbeck: J. Eng. Ind., 1991, vol. 113, pp. 253–67.10.1115/1.2899695 ↗
14. M.G. Stephenson and P.L.B. Oxley: Proc. Inst. Mech. Eng., 1969–1970, vol. 184 (31), pp. 561–74.10.1243/PIME_PROC_1969_184_045_02 ↗
15. B. Van Leer: J. Comput. Phys., 1977, vol. 23, pp. 276–99.10.1016/0021-9991(77)90095-X ↗
16. B. Van Leer: J. Comput. Phys., 1973, vol. 14, pp. 361–70.10.1016/0021-9991(74)90019-9 ↗
17. M. Souli, A. Ouahsine, and L. Lewin: Comput. Methods Appl. Mech. Eng., 2000, vol. 190, pp. 659–75.10.1016/S0045-7825(99)00432-6 ↗
18. T. Belytschko, W.K. Liu, and B. Moran: Nonlinear Finite Elements for Continua and Structures, John Wiley & Sons Ltd., West Sussex, England, 2000, pp. 9–13.
19. D.J. Benson: Comput. Methods Appl. M., 1992, vol. 99, pp. 235–94.10.1016/0045-7825(92)90042-I ↗
20. M.S. Gadala and J. Wang: Comput. Methods Appl. M., 1998, vol. 167, pp. 33–55.10.1016/S0045-7825(98)00107-8 ↗
21. M. Movahhedy, M.S. Gadala, and Y. Altintas: J. Mater. Processing Technol., 2000, vol. 103, pp. 267–75.10.1016/S0924-0136(00)00480-5 ↗
22. ASTM E 112-96: Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1998, pp. 237–51.
23. J.H. Dautzenberg and J.H. Zaat: Wear, 1973, vol. 23, pp. 9–19.10.1016/0043-1648(73)90036-7 ↗
24. M.A. Moore and M. Douthwaite: Metall. Trans. A, 1976, vol. 7A, pp. 1833–39.10.1007/BF02654978 ↗
25. J. Zhang and A.T. Alpas: Mater. Sci. Eng., A, 1993, vol. A160, pp. 25–35.10.1016/0921-5093(93)90494-Y ↗
26. B. Venkataraman and G. Sundararajan: Acta Mater., 1996, vol. 44, pp. 461–73.10.1016/1359-6454(95)00218-9 ↗
27. H. Zhang and A.T. Alpas: Mater. Sci. Eng., A, 2002, vol. A332, pp. 249–54.10.1016/S0921-5093(01)01752-X ↗
28. M. Elmadagli and A.T. Alpas: Mater. Sci. Eng., A, 2003, vol. 355, pp. 249–59.10.1016/S0921-5093(03)00072-8 ↗
29. F.P. Bowden and D. Tabor: The Friction and Lubrication of Solids, Part II, Oxford University Press, London, 1964, pp. 321–49.
30. E. Voce: J. Inst. Met., 1948, vol. 74, pp. 537–49.
31. LS-DYNA Theoretical Manual, Livermore Software Technology Corporation, Livermore, CA, 1998.
32. LS-DYNA 960 Keyword User’s Manual Volume I, Livermore Software Technology Corporation, Livermore, CA, 2001.
33. LS-DYNA 960 Keyword User’s Manual Volume II, Livermore Software Technology Corporation, Livermore, CA, 2001.
34. Metals Handbook, ASM INTERNATIONAL, Metals Park, OH, 1979, vol. 96, pp. 282-90.
35. D. Steinberg: Equation of State and Strength Properties of Selected Materials, Lawrence Livermore National Laboratory, Livermore, CA, 1996, p. 18.
36. Metals Handbook, ASM INTERNATIONAL, Metals Park, OH, 1989, vol. 16, pp. 105–16.
37. G.R. Johnson and W.H. Cook: Proc. 7th Int. Symp. Ballistics, The Hague, The Netherlands, 1983, pp. 541–47.
38. R.C. Batra and M.V.S. Ravinsankar: Int. J. Fract., 2000, vol. 105, pp. 161–86.10.1023/A:1007658224458 ↗
39. W.S. Lee and C.F. Lin: J. Mater. Processing Technol., 1998, vol. 75, pp. 127–36.10.1016/S0924-0136(97)00302-6 ↗
40. H.W. Meyer, Jr. and D.S. Kleponis: Int. J. Impact Eng., 2001, vol. 26, pp. 509–21.10.1016/S0734-743X(01)00107-5 ↗
41. S.P.F.C. Jaspers and J.H. Dautzenberg: J. Mater. Processing Technol., 2002, vol. 122, pp. 322–30.10.1016/S0924-0136(01)01228-6 ↗
42. W.K. Rule: Int. J. Impact Eng., 1997, vol. 19 (9–10), pp. 797–810.10.1016/S0734-743X(97)00015-8 ↗