Martensitic transformations, microstructure, and mechanical workability of TiPt
Source abstract
Abstract
The TiPt phase with the B2 structure has been reported to undergo a reversible displacive transformation to B19 martensite at about 1000 °C. This system could, therefore, serve in principle as the basis of a high-temperature shape-memory alloy (SMA). However, very few additional details of the B2 and B19 forms of TiPt have been published. In the present work, the B19→B2 transformation temperatures previously reported are confirmed, but the B2→B19 temperatures are found to be about 40 °C lower than previously accepted. The hardness of B19 martensite shows a minimum at a stoichiometry of ∼50 at. pct Pt. Between 45 and ∼50 at. pct Pt, the B2↔B19 transformations appear to take place in a complex sequence, with up to two intermediate phases being stable over a range of about 50 °C. No evidence for this intermediate phase was found for Pt contents from 50 to 56 at. pct Pt. It is clear that a Pt content of about 50 at. pct marks a significant change in the nature of the TiPt phase and its martensite or martensites. It was also found that TiPt has a slightly wider stability range than is shown in the current phase diagram, extending from 45 to 56 at. pct Pt at 1300 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Boron and Carbon Nanomaterials Research · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. L.M. Schetky: in Intermetallic Compounds. Principles and Practice, J.H. Westbrook and R.L. Fleischer, eds., John Wiley, Chichester, England, 1995, vol. 2, pp. 529–58.
2. H.C. Donkersloot and J.H.N. Van Vucht: J. Less-Common Met., 1970, vol. 20, pp. 83–91.10.1016/0022-5088(70)90092-5 ↗
3. T. Biggs, L.A. Cornish, M.J. Witcomb, and M.B. Cortie: Proc. ESOMAT 2000, 5th Eur. Symp. on Martensitic Transformations and Shape Memory Alloys, Sept. 4–8, 2000, Lake Como, Italy, in press.
4. J.L. Murray: Bull. Alloy Phase Diagrams, 1982, vol. 3 (3), pp. 329–34.10.1007/BF02869304 ↗
5. T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak: Binary Alloy Phase Diagrams, ASM INTERNATIONAL, Materials Park, OH, 1990, vol. 3, p. 3142.
6. JCPDS, ver. 2.16, International Center for Diffraction Data, Newtown Square, PA, 1995.
7. M.V. Nevitt, J.W. Downey, and R.A. Morris: Trans. TMS-AIME, 1960, vol. 213, pp. 1019–23.
8. R.L. Fleisher and R.J. Zabala: Metall. Trans. A, 1990, vol. 21A, pp. 2709–15.10.1007/BF02646066 ↗
9. K. Otsuka and X. Ren: Intermetallics, 1999, vol. 7, pp. 511–28.10.1016/S0966-9795(98)00070-3 ↗
10. T. Ohba: Proc. Int. Conf. Solid-Solid Phase Transformation ’99, M. Koiwa, K. Otsuka, and T. Miyazaki, eds., Japan Institute of Metals, Sendai, Japan, pp. 815–22.
11. B.H. Chen and H.F. Franzen: J. Less-Common Met., 1989, vol. 153, pp. L13-L19.10.1016/0022-5088(89)90133-1 ↗
12. R.W. Fonda and H.N. Jones: Mater. Sci. Eng., 1999, vols. A273–275, pp. 275–79.10.1016/S0921-5093(99)00354-8 ↗
13. A.G. Khachaturyan, S.M. Shapiro, and S. Semenovskaya: Phys. Rev. B, 1991, vol. 43 (13), pp. 10832–10843.10.1103/PhysRevB.43.10832 ↗
14. C. Segui, E. Cesari, J. Pons, V.A. Chemenko, and V.V. Kokorin: J. Phys. IV, 1996, vol. 6, pp. 381–84.
15. S.M. Shapiro: Proc. Int. Conf. Solid-Solid Phase Transformations ’99, M. Koiwa, K. Otsuka, and T. Miyazaki, eds., Japan Institute of Metals, 1999, pp. 799–806.