Crystallographic textures in rolled and annealed Fe-Ga and Fe-Al alloys
Source abstract
Abstract
The feasibility of obtaining [001] preferred texture in polycrystalline Fe85Ga15 and Fe85Al15 magnetostrictive alloys containing 1 mol pct NbC using a low-cost conventional thermomechanical processing approach is shown in this work. Thermomechanical processing conditions examined consisted of a sequence of hot rolling, two-stage warm rolling at 400 °C with intermediate anneal at 900 °C and texture anneal in the temperature range of 900 °C to 1300 °C for time periods up to 24 hours. Textures present prior to and after texture annealing were characterized using orientation imaging microscopy in a scanning electron microscope. In the case of Fe85Ga15 alloy with 1 mol pct NbC, the deformation-induced texture after a two-stage warm rolling consists of mixed {100} 〈110〉 and {111} 〈110〉 type partial textures. Texture annealing of the Fe85Ga15 alloy with 1 mol pct NbC at 1150 °C for 2 hours changes the texture to a predominant texture that is close to {001}〈100〉. On increasing the annealing time to 24 hours, the texture shifts toward {110}〈100〉. While texture anneal at both 1150 °C and 1300 °C produces a [001] or near-[001] preferred orientation along the rolling direction in the Fe85Ga15 alloy with 1 mol pct NbC, 1150 °C-24 hour treatment was found to provide the strongest [001] orientation among the conditions examined. Similar trends are observed for the case of Fe85Al15 alloy with 1 mol pct NbC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnetic Properties and Applications · Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. S. Guruswamy, N. Srisukhumbowornchai, A.E. Clark, J.B. Restorff, and M. Wun-Fogle: Scripta Mater., 2000, vol. 43, pp. 239–44.10.1016/S1359-6462(00)00397-3 ↗
2. N. Srisukhumbowornchai: Ph.D. Dissertation, University of Utah, Salt Lake City, UT, 2001, pp. 1–199.
3. N. Srisukhumbowornchai and S. Guruswamy: J. Appl. Phys., 2001, vol. 90, pp. 5680–88.10.1063/1.1412840 ↗
4. E. du Tremolet de Lacheisserie: Magnetostriction: Theory and Applications of Magnetoelasticity, CRC Press, Inc., Ann Arbor, MI, 1993, pp. 1–408.
5. K.B. Hathaway and A.E. Clark: MRS Bull., 1993, vol. 18, pp. 34–41.10.1557/S0883769400037337 ↗
6. J.P. Hirth and J. Lothe: Theory of Dislocations, 2nd ed., Wiley Interscience, New York, NY, 1982, pp. 274–77.
7. A.D. Rollett and S.I. Wright: in Texture and Anisotropy: Preferred Orientations in Polycrystals and their Effect on Materials Properties, U.F. Kocks, C.N. Tomé, and H.R. Wenk, eds., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 179–238.
8. R.W.K. Honeycombe: Plastic Deformation of Metals, Edward Arnold, Baltimore, MD, 1984, pp. 327–55.
9. F.J. Humphreys: Recrystallization and Related Annealing Phenomena, Pergamon Press, New York, NY, 1995, pp. 327–62 and 393–412.
10. Z.N. Bolycheva, M.M. Borodkina, and V.L. Sandomirskaya: Fiz. Metal. Metalloid, 1965, vol. 19, pp. 152–54.
11. R.S. Tebble and D.J. Craik: Magnetic Materials, Wiley-Interscience, New York, NY, 1969, pp. 540–44.
12. K. Foster and D. Pavlovic: J. Appl. Phys., 1963, vol. 34, pp. 1325–26.10.1063/1.1729493 ↗
13. R.K. Ray, J.J. Jonas, and R.E. Hook: Int. Mater. Rev., 1993, vol. 39, pp. 129–72.10.1179/imr.1994.39.4.129 ↗
14. R.S. Cline and Hsun Hu: Trans. TMS-AIME, 1965, vol. 233, pp. 57–64.
15. C.G. Dun and P.K. Koh: Trans. TMS-AIME, 1965, vol. 206, pp. 1017–24.
16. B.B. Rath: Proc. Conf. on Texture-Microstructure-Mechanical Properties Relationships of Materials, ASM INTERNATIONAL, Metals Park, OH, 1984, pp. 39–56.
17. C.S. Leslie: Trans. TMS-AIME, 1961, vol. 221, pp. 752–58.
18. H.-R. Wenk: in Texture and Anisotropy, V.F. Kocks, N. Tomê, and H.R. Wenk, eds., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 126–77.
19. D.J. Dingley, K.Z. Baba-Kishi, and V. Randle: Atlas of Backscattering Kikuchi Diffraction Patterns, 2nd ed., Institute of Physics Publishing, Bristol, 1995, pp. 1–16.
20. D.J. Dingley: in Electron Backscatter Diffraction in Materials Science, A.J. Scwartz, M. Kumar, and B.L. Adams, eds., Kluwer Academic/Plenum Publishing, New York, NY, 2000, pp. 1–18.