journal article·2005-08

Improvement of toughness and ductility of a cryomilled Al-Mg alloy via microstructural modification

B. Q. Han, E. J. Lavernia, F. A. Mohamed, C. C. Bampton

Publisher page

Abstract

The effect of annealing treatment on microstructure, fracture toughness, and tensile and compression behavior of a cryomilled Al-7.5 pct Mg alloy was investigated in the present study. Inspection of the mechanical performance reveals that there is a significant effect of annealing on fracture toughness and ductility. After annealing treatment, the value of fracture toughness increases from 8.3 to 17.5 MPa $$\sqrt m $$ , and the value of ductility increases from 4.4 to 14 pct, while the decrease of strength is slight. The improvement of ductility and toughness is attributed to the existence of lamellar coarsegrain bands that effectively blunt the crack tip and slow propagation. These bands have widths of approximately 500 nm and are parallel to the extrusion direction. They were produced in the microstructure, which has a typical grain size of approximately 260 nm as a result of the annealing at 773 K.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. C.C. Koch: Nanostructured Materials: Processing, Properties and Potential Applications, Noyes Publications (William Andrew Publishing), Norwich, NY, 2002.
2. M. Jain and T. Christman: Acta Metall., 1994, vol. 42, pp. 1901–11.10.1016/0956-7151(94)90015-9 ↗
3. J.E. Carsley, A. Fisher, W.W. Milligan, and E.C. Aifantis: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2261–71.10.1007/s11661-998-0104-3 ↗
4. M. Legros, B.R. Elliott, M.N. Rittner, J.R. Weertman, and K.J. Hemker: Phil. Mag. A, 2000, vol. 80, pp. 1017–26.10.1080/014186100250679 ↗
5. X.K. Sun, H.T. Cong, M. Sun, and M.C. Yang: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1017–24.10.1007/s11661-000-0043-0 ↗
6. V.L. Tellkamp, A. Melmed, and E.J. Lavernia: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2335–43.10.1007/s11661-001-0207-6 ↗
7. F.D. Torre, H.V. Swygenhoven, and M. Victoria: Acta Mater., 2002, vol. 50, pp. 3957–70.10.1016/S1359-6454(02)00198-2 ↗
8. T. Mukai, S. Suresh, K. Kita, H. Sasaki, N. Kobayashi, K. Higashi, and A. Inoue: Acta Mater., 2003, vol. 51, pp. 4197–208.10.1016/S1359-6454(03)00237-4 ↗
9. K.S. Kumai, S. Suresh, M.F. Chisholm, J.A. Horton, and P. Wang: Acta Mater., 2003, vol. 51, pp. 387–405.10.1016/S1359-6454(02)00421-4 ↗
10. E.O. Hall: Proc. Phys. Soc. London, 1951, vol. B64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
11. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
12. J.R. Weertman and R.S. Averback: in Nanomaterials: Synthesis, Properties and Applications, A.S. Edelstein and R.C. Cammarata, eds., Institute of Physics Publishing, Bristol, 1996, pp. 323–45.
13. C.C. Koch, D.G. Morris, K. Lu, and A. Inoue: MRS Bull., 1999, Feb., pp. 54–58.10.1557/S0883769400051551 ↗
14. C.C. Koch: Scripta Mater., 2003, vol. 49, pp. 657–62.10.1016/S1359-6462(03)00394-4 ↗
15. B.Q. Han, F.A. Mohamed, and E.J. Lavernia: J. Mater. Sci., 2003, vol. 38, pp. 3319–24.10.1023/A:1025150407956 ↗
16. K.S. Kumai, H.V. Swygenhoven, and S. Suresh: Acta Mater., 2003, vol. 51, pp. 5743–74.10.1016/j.actamat.2003.08.032 ↗
17. L. Lu, M.L. Sui, and K. Lu: Science, 2000, vol. 287, pp. 1463–66.10.1126/science.287.5457.1463 ↗
18. A.A. Karimpoor, U. Erb, K.T. Aust, and G. Palumbo: Scripta Mater., 2003, vol. 49, pp. 651–56.10.1016/S1359-6462(03)00397-X ↗
19. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials, 4th ed., Wiley, New York, NY, 1996.
20. E. Ma: Scripta Mater., 2003, vol. 49, pp. 663–68.10.1016/S1359-6462(03)00396-8 ↗
21. M.A. Morris-Munoz, A. Dodge, and D.G. Morris: Nanostruct. Mater., 1999, vol. 11, pp. 873–85.10.1016/S0965-9773(99)00385-2 ↗
22. V. Richter and M.V. Ruthendorf: Inter. J. Ref. Met. Hard Mater., 1999, vol. 17, pp. 141–52.10.1016/S0263-4368(99)00003-7 ↗
23. Y. Gan and B. Zhou: Scripta Mater., 2001, vol. 45, pp. 625–30.10.1016/S1359-6462(01)01066-1 ↗
24. R.A. Varin, L. Zbroniec, T. Czujko, and Y.K. Song: Mater. Sci. Eng., 2001, vol. A300, pp. 1–11.10.1016/S0921-5093(00)01809-8 ↗
25. S.H. Lee, K.I. Moon, H.S. Hong, and K.S. Lee: Intermetallics, 2003, vol. 11, pp. 1039–45.10.1016/S0966-9795(03)00119-5 ↗
26. D.G. Morris and M.A. Morris: Mater. Sci. Forum, 1997, vols. 235–238, pp. 861–72.10.4028/www.scientific.net/MSF.235-238.861 ↗
27. S.S. Kim, M.J. Hayes, and R.P. Gangloff: Mater. Sci. Eng., 1995, vol. A203, pp. 256–71.10.1016/0921-5093(95)09844-5 ↗
28. P.S. Pao, H.N. Jones, and C.R. Feng: MRS Symp. Proc., 2004, vol. 791, pp. Q1.8.1-Q1.8.6.
29. D. Witkin, Z. Lee, R. Rodriguez, S. Nutt, and E. Lavernia: Scripta Mater., 2003, vol. 49, pp. 297–302.10.1016/S1359-6462(03)00283-5 ↗
30. Y. Wang, M. Chen, F. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912–15.10.1038/nature01133 ↗
31. F. Zhou, J. Lee, S. Dallek, and E.J. Lavernia: J. Mater. Res., 2001, vol. 16, pp. 3451–58.10.1557/JMR.2001.0474 ↗
32. “Standard Test Method for Plane-Strain Fracture Toughness of Metallic Materials,” ASTM E399-90, ASTM, West Conshohocken, PA, 2000.
33. M.A. Meyers and K.K. Chawla: Mechanical Metallurgy Principles and Applications, Prentice-Hall, Englewood Cliffs, NJ, 1984.
34. B.Q. Han, Z. Lee, S.R. Nutt, E.J. Lavernia, and F.A. Mohamed: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 603–13.10.1007/s11661-003-0095-z ↗
35. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, United Kingdom, 1982.
36. S. Cheng, E. Ma, Y.M. Wang, L.J. Kecskes, K.M. Youssef, C.C. Koch, U.P. Trociewitz, and K. Han: Acta Mater., 2005, vol. 53, pp. 1521–33.10.1016/j.actamat.2004.12.005 ↗
37. Y.M. Wang and E. Ma: Acta Mater., 2004, vol. 52, pp. 1699–709.10.1016/j.actamat.2003.12.022 ↗
38. L. Lu, Y. Shen, X. Chen, L. Qian, and K. Lu: Science, 2004, vol. 304, pp. 422–26.10.1126/science.1092905 ↗
39. B.Q. Han, E.J. Lavernia, and F.A. Mohamed: Mater. Sci. Eng., 2003, vol. A358, pp. 318–23.10.1016/S0921-5093(03)00284-3 ↗
40. H. Riedel: Fracture at High Temperature, Springer-Verlag, Berlin, 1987.10.1007/978-3-642-82961-1 ↗
41. M.A. Morris and M. Leboeuf: Mater. Sci. Eng., 1997, vol. A224, pp. 1–11.10.1016/S0921-5093(96)10532-3 ↗
42. P.S. Pao, H.N. Jones, S.J. Gill, and C.R. Feng: MRS Symp. Proc., 2003, vol. 740, pp. I1.4.1-I1.4.6.
43. L.S. Sigl, P.A. Mataga, B.J. Dalgleish, R.M. McMeeking, and A.G. Evans: Acta Metall., 1988, vol. 36, pp. 945–53.10.1016/0001-6160(88)90149-6 ↗
44. P.A. Mataga: Acta Metall., 1989, vol. 37, pp. 3349–59.10.1016/0001-6160(89)90207-1 ↗
45. M. Bannister, H. Shercliff, G. Bao, F. Zok, and M.F. Ashby: Acta Metall., 1992, vol. 40, pp. 1531–37.10.1016/0956-7151(92)90096-W ↗
46. G.R. Odette, B.L. Chao, J.W. Sheckherd, and G.E. Lucas: Acta Metall., 1992, vol. 40, pp. 2381–89.10.1016/0956-7151(92)90157-A ↗
47. M. Hoffman, B. Fiedler, T. Emmel, H. Prielipp, N. Claussen, D. Gross, and J. Rodel: Acta Metall., 1997, vol. 45, pp. 3609–23.
48. W.O. Soboyejo, K.T.V. Rao, S.M.L. Sastry, and R.O. Ritchie: Metall. Trans. A, 1993, vol. 24A, pp. 585–600.10.1007/BF02656628 ↗
49. M. Li and W.O. Soboyejo: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1385–99.10.1007/s11661-000-0257-1 ↗
50. J. Lou and W.O. Soboyejo: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 325–37.10.1007/s11661-001-0264-x ↗
51. D.R. Lesuer, C.K. Syn, O.D. Sherby, J. Wadsworth, J.J. Lewandowski, and J.W.H. Hunt: Int. Mater. Rev., 1996, vol. 41, pp. 169–97.10.1179/imr.1996.41.5.169 ↗
52. W. Soboyejo: Mechanical Properties of Engineered Materials, Marcel Dekker, Inc., New York, NY, 2003.
53. J. Weertman: Dislocation Based Fracture Mechanics, Word Scientific Publ., Singapore, 1996.10.1142/3062 ↗