Macrosegregation of Impurities in Directionally Solidified Silicon
Source abstract
Abstract
Directional solidification of molten metallurgical-grade Si was carried out in a vertical Bridgman furnace. The effects of changing the mold velocity from 5 to 110 μm seconds–1 on the macrosegregation of impurities during solidification were investigated. The macrostructures of the cylindrical Si ingots obtained in the experiments consist mostly of columnar grains parallel to the ingot axis. Because neither cells nor dendrites can be observed on ingot samples, the absence of precipitated particles and the fulfillment of the constitutional supercooling criterion suggest a planar solid–liquid interface for mold velocities ≤10 μm seconds–1. Concentration profiles of several impurities were measured along the ingots, showing that their bottom and middle are purer than the metallurgical Si from which they solidified. At the ingot top, however, impurities accumulated, indicating the typical normal macrosegregation. When the mold velocity decreases, the macrosegregation and ingot purity increase, changing abruptly for a velocity variation from 20 to 10 μm seconds–1. A mathematical model of solute transport during solidification shows that, for mold velocities ≥20 μm seconds–1, macrosegregation is caused mainly by diffusion in a stagnant liquid layer assumed at the solid–liquid interface, whereas for lower velocities, macrosegregation increases as a result of more intense convective solute transport.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Silicon and Solar Cell Technologies · Solidification and crystal growth phenomena · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. E. Øvrelid, M. Juel, M. Bellmann, and B.A. Tuffour: Refining Of Solar Grade Silicon by Directional Solidification, Silicon for the Chemical and Solar Industry IX, Oslo, Norway, 2008, pp. 91-101.
2. A.F.B. Braga, S.P. Moreira, P.R. Zampieri, J.M.G. Bacchin, and P.R. Mei: Sol. Energ. Mater. Sol. Cell., 2008, vol. 92, pp. 418-24.10.1016/j.solmat.2007.10.003 ↗
3. D. Lynch: JOM, 2009, vol. 61 pp. 41-48.10.1007/s11837-009-0166-8 ↗
4. P. Woditsch and W. Koch: Sol. Energ. Mater. Sol. Cell., 2002, vol. 72, pp. 11-26.10.1016/S0927-0248(01)00146-5 ↗
5. T.L. Chu, G.A. Vanderleeden, and H.I. Yoo: J. Electrochem. Soc., 1978, vol. 125, pp. 661-65.10.1149/1.2131520 ↗
6. B.G. Gribov and K.V. Zinov’ev: Inorg. Mater., 2003, vol. 39, pp. 653-62.10.1023/A:1024553420534 ↗
7. K. Morita and T. Miki: Intermetallics, 2003, vol. 11, pp. 1111-17.10.1016/S0966-9795(03)00148-1 ↗
8. K. Tang, E.J. Øvrelid, G. Tranell, and M. Tangstad: Mater. Trans., 2009, vol. 50, pp. 1978-84.10.2320/matertrans.M2009110 ↗
9. F.A. Trumbore: Bell Labs Tech. J., 1960, vol. 39, pp. 205-33.10.1002/j.1538-7305.1960.tb03928.x ↗
10. S. Pizzini: Sol. Energ. Mater., 1982, vol. 6, pp. 253-97.10.1016/0165-1633(82)90035-1 ↗
11. E.R. Weber: Appl. Phys. A-Mater. Sci. Process., 1983, vol. 30, pp. 1-22.10.1007/BF00617708 ↗
12. J.H. Aalberts and M.L. Verheijke: Appl. Phys. Lett., 1962, vol. 1, pp. 19-20.10.1063/1.1777354 ↗
13. T. Narushima, A. Yamashita, C. Ouchi, and Y. Iguchi: Mater. Trans., 2002, vol. 43, pp. 2120-24.10.2320/matertrans.43.2120 ↗
14. T. Nozaki, Y. Yatsurug, and N. Akiyama: J. Electrochem. Soc., 1970, vol. 117, pp. 1566-68.10.1149/1.2407385 ↗
15. R.H. Hopkins, R.G. Seidensticker, P. Raichoudhury, P.D. Blais, and J.R. Mccormick: J. Cryst. Growth, 1977, vol. 42, pp. 493-98.10.1016/0022-0248(77)90236-6 ↗
16. S. Kobayashi: Properties of Crystalline Silicon, Ed. R. Hull, INSPEC - The Institution of Electrical Engineers, London, U.K.: 1999, pp. 16-22.
17. B.C. Sim, K.H. Kim, and H.W. Lee: J. Cryst. Growth, 2006, vol. 290, pp. 665-69.10.1016/j.jcrysgro.2006.02.003 ↗
18. S.N. Tewari, R. Shah, and M.A. Chopra: Metall. Trans. A, 1993, vol. 24A, pp. 1661-69.10.1007/BF02646605 ↗
19. F.V. Dean, A. Hellawell, and J.R. Kerr: J. Inst. Met., 1962, vol. 90, pp. 234-37.
20. V.G. Smith, W.A. Tiller, and J.W. Rutter: Can. J. Phys., 1955, vol. 33, pp. 723-45.10.1139/p55-089 ↗
21. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Trans Tech Publications, Aedermannsdorf, Switzerland, 1989.
22. E. Scheil: Z. Metallkd., 1942, vol. 1, pp. 70-72.
23. W.G. Pfann: J. Met., 1952, vol. 4, pp. 747-53.
24. J.A. Burton, R.C. Prim, and W.P. Slichter: J. Chem. Phys., 1953, vol. 21, pp. 1987-91.10.1063/1.1698728 ↗
25. J.J. Favier: Acta Metall., 1981, vol. 29, pp. 197-204.10.1016/0001-6160(81)90099-7 ↗
26. T.G. Digges and R. Shima: J. Cryst. Growth, 1980, vol. 50, pp. 865-69.10.1016/0022-0248(80)90149-9 ↗
27. H.E. Bridgers and E.D. Kolb: J. Chem. Phys., 1956, vol. 25, pp. 648-50.10.1063/1.1743020 ↗
28. T. Izumi: J. Appl. Phys., 1995, vol. 78, pp. 1492-94.10.1063/1.360238 ↗
29. A.S. Yue and J.B. Clark: Trans. TMS-AIME, 1960, vol. 218, pp. 55-58.
30. B.E. Bartlett, P. Capper, J.E. Harris, and M.J.T. Quelch: J. Cryst. Growth, 1979, vol. 46, pp. 623-29.10.1016/0022-0248(79)90179-9 ↗
31. T.L. Chu, S.S. Chu, R.W. Kelm, and G.W. Wakefield: J. Electrochem. Soc., 1978, vol. 125, pp. 595-97.10.1149/1.2131507 ↗
32. E. Kuroda and T. Saitoh: J. Cryst. Growth, 1979, vol. 47, pp. 251-60.10.1016/0022-0248(79)90249-5 ↗
33. C.P. Khattak, M. Basaran, F. Schmid, R.V.D’Aiello, P.H. Robinson, and A.H. Firester: 15 th IEEE Photovoltaic Specialists Conf., Orlando, FL, 1981, p. 1432.
34. N. Yuge, H. Baba, Y. Sakaguchi, K. Nishikawa, H. Terashima, and F. Aratani: Sol. Energ. Mater. Sol. Cell., 1994, vol. 34, pp. 243-50.10.1016/0927-0248(94)90046-9 ↗
35. S. Pizzini, M. Acciarri, and S. Binetti: Phys. Status Solidi A, 2005, vol. 202, pp. 2928-42.10.1002/pssa.200521104 ↗
36. R. Kvande, O. Mjos, and B. Ryningen: Mater. Sci. Eng. A, 2005, vol. A413, pp. 545-49.10.1016/j.msea.2005.09.035 ↗
37. E. Øvrelid, B. Geerligs, A. Waernes, O. Raaness, I. Solheim, R. Jensen, K. Tang, S. Santeen, and B. Wiersma: Proc. Silicon for the Chemical Industry VIII, Eds. H.A. Øye, H. Brekken, T. Foosnaesand, and L. Nygaard, Trondheim, Norway, 2006, pp. 1-12.
38. L.A. Currie: Pure Appl. Chem., 1995, vol. 67, pp. 1699-723.10.1351/pac199567101699 ↗
39. G. Müller: Crystal Growth from the Melt, Springer-Verlag, Berlin, Germany, 1988.10.1007/978-3-642-73208-9 ↗
40. A. Schei, J.K. Tuset, and H. Tveit: Production of High Silicon Alloys, Tapir Forlag, Trondheim, Norway, 1998.
41. R.P. Liu, D.M. Herlach, M. Vandyoussefi, and A.L. Greer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1067-73.10.1007/s11661-004-1009-4 ↗
42. A. Çiftja: Ph.D. Dissertation, Norwegian University of Science and Technology, Trondheim, Norway, 2009.
43. B. Chalmers: Is There a Speed Limit? Flat Plate Solar Array Project Research Forum on High Speed Growth and Characterization of Crystals for Solar Cells, Jet Propulsion Laboratory, Port St. Lucie, FL, 1984, pp.15-36.
44. F.R. Mollard and M.C. Flemings: Trans. TMS-AIME, 1967, vol. 239, pp. 1526-46.
45. W.A. Tiller, K.A. Jackson, J.W. Rutter, and B. Chalmers: Acta Metall., 1953, vol. 1, pp. 428-37.10.1016/0001-6160(53)90126-6 ↗
46. M.C. Flemings: Solidification Processing, McGraw-Hill, New York, NY, 1974.
47. M.D. Rinaldi, R.M. Sharp, and M.C. Flemings: Metall. Trans., 1972, vol. 3, pp. 3133-38.10.1007/BF02661324 ↗
48. J.P. Garandet: Int. J. Thermophys., 2007, vol. 28, pp. 1285-303.10.1007/s10765-007-0205-z ↗
49. R.M. Sharp and A. Hellawel: J. Cryst. Growth, 1971, vol. 8, pp. 29-32.10.1016/0022-0248(71)90018-2 ↗
50. S.V. Patankar: Numerical Heat Transfer and Fluid Flow, Hemisphere Pub. Corp., New York, NY, 1980.
51. J.J. Favier: Acta Metall., 1981, vol. 29, pp. 205-14.10.1016/0001-6160(81)90100-0 ↗
52. H. Kodera: Jpn. J. Appl. Phys., 1963, vol. 2, pp. 212-19.10.1143/JJAP.2.212 ↗
53. M. Zief and W.R. Wilcox: Fractional Solidification, M. Dekker, New York, NY, 1967.
54. R.A. Brown and D.H. Kim: J. Cryst. Growth, 1991, vol. 109, pp. 50-65.10.1016/0022-0248(91)90157-Z ↗
55. P. Capper, C.L. Jones, E.J. Pearce, and M.J.T. Quelch: J. Cryst. Growth, 1983, vol. 62, pp. 487-97.10.1016/0022-0248(83)90391-3 ↗
56. J.A. Shercliff: Vector Fields: Vector Analysis Developed Through its Application to Engineering and Physics, Cambridge University Press, New York, NY, 1977.
57. T. Iida and R.I.L. Guthrie: The Physical Properties of Liquid Metals, Clarendon Press, Oxford, U.K., 1988.
58. H. Kodera: Jpn. J. Appl. Phys., 1962, vol. 2, pp. 212-19.10.1143/JJAP.2.212 ↗
59. Y. Liu, Z. Long, H. Wang, Y. Du, and B. Huang: Scripta Mater., 2006, vol. 55, pp. 367-70.10.1016/j.scriptamat.2006.04.019 ↗
60. J.R. Cahoon: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 583-93.10.1007/s11661-997-0044-3 ↗
61. S. Kimura and K. Terashima: J. Cryst. Growth, 1997, vol. 180, pp. 323-33.10.1016/S0022-0248(97)00263-7 ↗
62. C.J. Smithells, E.A. Brandes, and G.B. Brook: Smithells Metals Reference Book, Butterworth-Heinemann, Burlington, MA, 1992.
63. P. Protopapas and N.A.D. Parlee: High Temp. Sci., 1974, vol. 6, pp. 1-15.
64. A.S. Chauhan, R. Ravi, and R.P. Chhabra: Chem. Phys., 2000, vol. 252, pp. 227-36.10.1016/S0301-0104(99)00345-6 ↗
65. T. Iida, R. Guthrie, and N. Tripathi: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 559-64.10.1007/s11663-006-0039-2 ↗
66. K. Tang, E.J. Øvrelid, G. Tranell, and M. Tangstad: JOM, 2009, vol. 61, pp. 49-55.10.1007/s11837-009-0167-7 ↗