Effect of surface oxide films on the properties of pulse electric-current sintered metal powders
Source abstract
Abstract
Metallic powders with various thermodynamic stability oxide films (Ag, Cu, and Al powders) were sintered using a pulse electric-current sintering (PECS) process. Behavior of oxide films at powder surfaces and their effect on the sintering properties were investigated. The results showed that the sintering properties of metallic powders in the PECS process were subject to the thermodynamic stability of oxide films at particles surfaces. The oxide films at Ag powder surfaces are decomposed during sintering with the contact region between the particles being metal/metal bond. The oxide films at Cu powder surfaces are mainly broken via loading pressure at a low sintering temperature. At a high sintering temperature, they are mainly dissolved in the parent metal, and the contact regions turn into the direct metal/metal bonding. Excellent sintering properties can be received. The oxide films at Al powder surfaces are very stable, and cannot be decomposed and dissolved, but broken by plastic deformation of particles under loading pressure at experimental temperatures. The interface between particles is partially bonded via the direct metal/metal bonding making it difficult to achieve good sintered properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced materials and composites · Advanced ceramic materials synthesis · Injection Molding Process and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. M. Tokita: Mater. Sci. Forum, 1999, vols. 308–311, pp. 83–88.10.4028/www.scientific.net/MSF.308-311.83 ↗
2. M. Omori: Mater. Sci. Eng., 2000, vol. A287, pp. 183–88.10.1016/S0921-5093(00)00773-5 ↗
3. S.H. Risbud, J.R. Groza, and M.J. Kim: Phil. Mag., 1994, vol. B69, pp. 525–33.10.1080/01418639408240126 ↗
4. S.W. Wang, L.D. Chen, Y.S. Kang, M. Niino, and T. Hirai: Mater. Res. Bull., 2000, vol. 35, pp. 619–28.10.1016/S0025-5408(00)00246-4 ↗
5. O. Yanagisawa, T. Hatayama, and K. Matsugi: Mater. Jpn., 1994, vol. 33, pp. 1489–96.10.2320/materia.33.1489 ↗
6. M. Tokita: Proc. NEDO Int. Symp. on Functionally Graded Materials, New Energy and Industrial Technology Development Organization (NEDO), Tokyo, Japan, 1999, pp. 23–33.
7. T. Nagae, M. Yokota, M. Nose, S. Tomida, T. Kamiya, and S. Saji: Mater. Trans., 2002, vol. 43, pp. 1390–97.10.2320/matertrans.43.1390 ↗
8. M. Yoshimura, T. Ohji, M. Sando, and K. Niihara: J. Mater. Sci. Lett., 1998, vol. 17, pp. 1389–91.10.1023/A:1026476430465 ↗
9. Y. Zhou, K. Hirao, M. Toriyama, and H. Tanaka: J. Am. Ceram. Soc., 2000, vol. 83, pp. 654–56.10.1111/j.1151-2916.2000.tb01249.x ↗
10. K. Nishimoto, K. Saida, and R. Tsuduki: J. Jpn. Inst. Met., 2001, vol. 65, pp. 747–55.10.2320/jinstmet1952.65.8_747 ↗
11. Z.A. Munir: Powder Metall., 1981, vol. 24, pp. 177–80.10.1179/pom.1981.24.4.177 ↗
12. L.P. Lefebvre, G. Pleizier, and Y. Deslandes: Powder Metall., 2001, vol. 44, pp. 259–66.10.1179/003258901666437 ↗
13. O. Ohashi: J. Jpn. Welding Soc., 2000, vol. 69, pp. 465–74.10.2207/qjjws1943.69.465 ↗
14. A.A. Shirzadi, H. Assadi, and E.R. Wallach: Surf. Interface Anal., 2001, vol. 31, pp. 609–18.10.1002/sia.1088 ↗
15. G. Xie, O. Ohashi, M. Song, K. Furuya, and T. Noda: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 699–703.10.1007/s11661-003-0104-2 ↗
16. G.A. Weissler: Powder Metall. Int., 1979, vol. 11, pp. 112–14.
17. G. Xie, O. Ohashi, T. Yoshioka, M. Song, K. Mitsuishi, H. Yasuda, F. Furuya, and T. Noda: Mater. Trans., 2001, vol. 42, pp. 1846–49.10.2320/matertrans.42.1846 ↗
18. R.F. Tylecote: The Solid Phase Welding of Metals, Edward Arnold Ltd., London, 1968, p. 44.
19. O. Ohashi and T. Hashimoto: J. Jpn. Welding Soc., 1980, vol. 49, pp. 647–51.10.2207/qjjws1943.49.647 ↗
20. Y. Fukaya, Y. Higashi, T. Higo, M. Hamaoka, M. Sueda, T. Kobayashi, M. Ogawa, and K. Sinozaki: Q. J. Jpn. Welding Soc., 1997, vol. 15, pp. 467–75.10.2207/qjjws.15.467 ↗
21. C. Lall: Int. J. Powder Metall., 1991, vol. 27, pp. 315–29.
22. Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, ASM INTERNATIONAL, Materials Park, OH, 1990, p. T13.