The interactive role of inclusions and SiC reinforcement on the high-cycle fatigue resistance of particle reinforced metal matrix composites
Source abstract
Abstract
The effect of intermetallic inclusions on the fatigue crack initiation and growth in 2080 Al alloy and 2080/SiC p composites was investigated. Using surface replication, it was determined that, in the high-cycle fatigue region, life is dominated by the initiation process. It was also determined that the majority of initiation sites were associated with intermetallic inclusions. While 2080/SiC/20 p showed a definitive relationship between inclusion size and fatigue life, i.e., a higher inclusion size resulted in lower fatigue life, there was no correlation in 2080/SiC/30 p . This was attributed to more of the load being shared by the higher volume fraction of SiC particles and smaller average inclusion sizes in the latter composite. A conceptual model is proposed that accounts for these observations and qualitatively shows the effect of reinforcement on stress enhancement in near-surface inclusions.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. W.H. Reimann and A.W. Brisbane: Eng. Fract. Mech., 1973, vol. 5, p. 67.10.1016/0013-7944(73)90008-8 ↗
2. K. Nishioka: Mater. Testing, 1957, vol. 6, pp. 382–85.
3. R.M. Pelloux and R.E. Stoltz: Proc. 4th Int. Conf. on the Strength of Metals and Alloys, 1976, p. 1023.
4. J.H. Mulherin and H. Rosenthal: Metall. Trans., 1971, vol. 2, pp. 427–32.10.1007/BF02663329 ↗
5. N. Chawla, C. Andres, J.W. Jones, and J.E. Allison: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2843–54.10.1007/s11661-998-0325-5 ↗
6. U. Habel, C.M. Christenson, J.W. Jones, and J.E. Allison: Proc. 10th Int. Conf. Composite Materials, A. Poursartip and K. Street, eds., Woodhead Publishing Ltd., Cambridge, United Kingdom, 1995, vol. 2, pp. 597–604.
7. A.R. Vaidya and J.J. Lewandowski: Mater. Sci. Eng. A, 1996, vol. A220, pp. 85–92.10.1016/S0921-5093(96)10464-0 ↗
8. J. Hall, J.W. Jones, and A. Sachdev: Mater. Sci. Eng. A, 1994, vol. A183, pp. 69–80.10.1016/0921-5093(94)90891-5 ↗
9. J.E. Allison and J.W. Jones: in Fundamentals of Metal Matrix Composities, S. Suresh, A. Mortensen, and A. Needleman, eds., Butterworth-Heinemann, Stoneham, MA, 1993, pp. 269–94.10.1016/B978-0-08-052371-2.50019-5 ↗
10. J.J. Bonnen, J.E. Allison, and J.W. Jones: Metall. Trans. A, 1991, vol. 22A, pp. 1007–19.10.1007/BF02661094 ↗
11. C. Li and F. Ellyin: Mater. Sci. Eng. A 1996, vol. A214, pp. 115–21.10.1016/0921-5093(96)10250-1 ↗
12. E.Y. Chen, L. Lawson, and M. Meshii: Mater. Sci. Eng. A, 1995, vol. A200, p. 192.10.1016/0921-5093(95)07009-5 ↗
13. J.K. Shang and R.O. Ritchie: in Metal Matrix Composites: Mechanisms and Properties, R.K. Everett and R.J. Arsenault, eds., Academic Press, Boston, MA, 1991, p. 255.
14. D.A. Lukasak and D.A. Koss: Composites, 1993, vol. 24, p. 262.10.1016/0010-4361(93)90173-6 ↗
15. D.A. Lukasek: Ph.D. Dissertation, Pennsylvania State University, University Park, PA, 1993.
16. J.L. Cook and W.R. Mohn: Engineered Materials Handbook, ASM INTERNATIONAL, Materials Park, OH, 1987, vol. 1, p. 896.
17. G.J. Hildeman and M.J. Koczak: in Treatise on Materials Science and Technology, A.K. Vasudevan and R.D. Doherty, eds., Academic Press, Boston, MA, 1989, vol. 31, p. 323.
18. H.J. Rack: in Processing and Properties of Powder Metallurgy Composites, P. Kumar, K. Vedula, and A. Ritter, eds., TMS, Warrendale, PA, 1988, p. 155.
19. P.E. Krajewski, J.E. Allison, and J.W. Jones: Metall. Trans. A, 1993, vol. 24A, p. 2731.10.1007/BF02659497 ↗
20. M.H. Swain: in Small Crack Test Methods, ASTM STP 1149, J.M. Larsen and J.E. Allison, eds., ASTM, Philadelphia, PA, 1992, pp. 34–56.10.1520/STP15063S ↗
21. Z. Mei and J.W. Morris, Jr.: Int. J. Fract., 1993, vol. 64, pp. 43–61.10.1007/BF00019624 ↗
22. M. Levin and B. Karlsson: Int. J. Fatigue, 1993, vol. 15, p. 377.10.1016/0142-1123(93)90483-7 ↗
23. L.C. Davis and J.E. Allison: Metall. Trans. A, 1993, vol. 24A pp. 2487–96.10.1007/BF02646527 ↗
24. J.D. Eshelby: Proc. R. Soc., 1957, vol. A241, p. 376.10.1098/rspa.1957.0133 ↗
25. C.D. Liu, M.N. Bassim, and S.S. Lawrence: Eng. Fract. Mech., 1995, vol. 50, pp. 301–07.10.1016/0013-7944(94)00197-P ↗
26. Y. Murakami, S. Kodama, and S. Konuma: Int. J. Fatigue, 1989, vol. 11, pp. 291–98.10.1016/0142-1123(89)90054-6 ↗
27. Y. Murakami, S. Kodama, and S. Konuma: Int. J. Fatigue, 1989, vol. 11, p. 299.10.1016/0142-1123(89)90055-8 ↗
28. J. Grison and L. Remy: Eng. Fract. Mech., 1997, vol. 57, pp. 41–55.10.1016/S0013-7944(97)00006-4 ↗
29. R. Chang, W.L. Morris, and O. Buck: Scripta Metall., 1979, vol. 13, pp. 191–94.10.1016/0036-9748(79)90291-6 ↗
30. W.L. Morris and M.R. James: Metall. Trans., 1980, vol. 11A, pp. 850–51.10.1007/BF02661216 ↗
31. K. Tanaka and T. Mura: Metall. Trans. A, 1982, vol. 13A, pp. 117–23.10.1007/BF02642422 ↗
32. W.L. Morris, O. Buck, and H.L. Marcus: Metall. Trans. A, 1976, vol. 7A, pp. 1161–65.10.1007/BF02656599 ↗
33. Y.C. Kung and M.E. Fine: Metall. Trans. A, 1979, vol. 10A, pp. 603–10.10.1007/BF02658324 ↗