journal article·2000-09

A model for predicting the effect of deformation after solution treatment on the subsequent artificial aging behavior of AA7030 and AA7108 alloys

W. J. Poole, J. A. Sæter, S. Skjervold, G. Waterloo

Publisher page

Abstract

The effect of deformation after solution treatment on the two-step artificial aging response has been examined for AA7030 and AA7108 alloys. Aging experiments were conducted where the prestrain level was varied between 0 and 1.2. It was observed that the kinetics of aging were accelerated and the magnitude of the peak strength decreased in the presence of prestrain. This was attributed to the increased growth/coarsening rate of precipitates on dislocations and the widening of the precipitate-size distribution, respectively. A model was developed based on the internal state variable approach to predict yield stress as a function of the heat treatment and the level of prestrain. The increase in the kinetics of aging was accounted for in an average sense by the use of an effective diffusion coefficient that combines bulk and short-circuit diffusion. The precipitation model was based on two variables; the average spacing between precipitates and the average strength of precipitates. The variation of the average strength of precipitates with precipitate radius was varied to account for the change in the width of the precipitate-size distribution. Static recovery of the deformed structure during artificial aging was also accounted for in a first-order approximation. Good agreement was found between the model predictions and experimental results. Additional experimental data were obtained after the model was developed, and it was observed that the model made excellent predictions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. J.D. Embury and R.B. Nicholson: Acta Metall., 1965, vol. 13, pp. 403–17.10.1016/0001-6160(65)90067-2 ↗
2. L.F. Mondolfo: Metall. Rev., 1971, pp. 95–124.10.1179/095066071790137865 ↗
3. A.J. De Ardo and C.J. Simensen: Metall. Trans., 1973, vol. 4, pp. 2413–21.10.1007/BF02669384 ↗
4. J.T. Staley: Metall. Trans., 1974, vol. 5, pp. 929–32.10.1007/BF02643150 ↗
5. J.K. Park and A.J. Ardell: Metall. Trans. A, 1983, vol. 14A, pp. 1957–65.10.1007/BF02662363 ↗
6. J.T. Staley: Proc. 3rd Int. Conf. on Aluminum Alloys, L. Amberg, O. Lohne, E. Nes, N. Ryum, eds., Norwegian Institute of Technology, Trondheim, 1992, pp. 107–43.
7. A.K. Mukhopadhay, Q.B. Yang, and S.R. Singh: Acta Metall. Mater., 1994, vol. 42, pp. 3083–91.10.1016/0956-7151(94)90406-5 ↗
8. J. Gjønnes. and C.J. Simensen: Acta Metall., 1970, vol. 18, pp. 881–90.10.1016/0001-6160(70)90016-7 ↗
9. R.M. Allen and J.B. Vander Sande: Acta Metall., 1980, vol. 28, pp. 1185–95.10.1016/0001-6160(80)90073-5 ↗
10. A. Deschamps, Y. Bréchet, P. Guyot, and F. Livet: Z. Metallkd., 1997, vol. 88, pp. 601–06.
11. K.C. Russell: Adv. Colloid Interfacial Sci., 1980, vol. 13, pp. 255–61.
12. J.J. Hoyt: Acta Metall., 1991, vol. 39, p. 2091.10.1016/0956-7151(91)90179-5 ↗
13. A. Deschamps, F. Livet, and Y. Bréchet: Acta Mater., 1999, vol. 47, pp. 281–92.10.1016/S1359-6454(98)00293-6 ↗
14. W.J. Poole, H.R. Shercliff, and T. Castillo: Mater. Sci. Technol., 1997, vol. 13, pp. 897–904.10.1179/mst.1997.13.11.897 ↗
15. W.J. Poole, J.A. Sæter, J. Huang, G. Waterloo, and S. Skjervold: in Automotive Alloys III, S.K. Das, ed., TMS, Warrendale, PA, in press.
16. J.A. Sæter, G. Waterloo, and W.J. Poole: Proc. 6th Int. Conf. on Aluminum Alloys, T. Sato, S. Kunai, T. Kobayashi, and Y. Murakani, eds., Japan Institute of Light Metals, 1998, pp. 745–50.
17. H.R. Shercliff and M.F. Ashby: Acta Metall. Mater., 1990, vol. 38, pp. 1789–1802.10.1016/0956-7151(90)90291-N ↗
18. H.R. Shercliff and M.F. Ashby: Acta Metall. Mater., 1990, vol. 38, pp. 1803–12.10.1016/0956-7151(90)90292-O ↗
19. P. Guyot and L. Cottignies: Acta Metall., 1996, vol. 44, pp. 4161–67.
20. A. Deschamps and Y. Bréchet: Acta Mater., 1999, vol. 47, pp. 293–305.10.1016/S1359-6454(98)00296-1 ↗
21. O. Richmond: J. Met., 1986, vol. 38, pp. 16–18.
22. M.F. Ashby: Mater. Sci. Technol., 1992, vol. 8, pp. 102–11.10.1179/mst.1992.8.2.102 ↗
23. J.C. Ion, K.E. Easterling, and M.F. Ashby: Acta Metall., 1984, vol. 32, pp. 1949–62.10.1016/0001-6160(84)90176-7 ↗
24. L.M. Brown and R.K. Ham: Strengthening Methods in Crystals, John Wiley & Sons, New York, NY, 1971, pp. 12–129.
25. A.J. Foreman and M.J. Makin: Phil Mag., 1966, vol. 14, pp 911–24.10.1080/14786436608244762 ↗
26. A.J. Ardell. Metall. Trans. A., 1985, vol. 16A, pp. 2131–65.10.1007/BF02670416 ↗
27. U.F. Kocks, A.S. Argon, and M.F. Ashby: Progr. Mater. Sci., 1975, vol. 19, pp. 216–20.
28. R.D. Doherty: in Physical Metallurgy, R.W. Cahn and P. Haasen, eds., North-Holland, Amsterdam, The Netherlands, 1996, p. 1436.
29. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, Van Nostrand Reinhold, Berkshire, UK, 1981, pp. 314–17.
30. E.W. Hart: Acta Metall., 1957, vol. 5, p. 597.10.1016/0001-6160(57)90127-X ↗
31. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982, p. 12.
32. J. Gil Sevillano: in Materials Science and Technology: A Comprehensive Treatment, R.W. Cahn, P. Haasen, and E.J. Kramer, eds., VCH Publishing, New York, NY, 1993, vol. 6, pp. 19–88.
33. P. Guyot and G.M. Raynard: Acta Metall. Mater., 1991, vol. 39, pp. 317–22.10.1016/0956-7151(91)90310-W ↗
34. M. Zehetbauer and V. Seumer: Acta Metall. Mater., 1993, vol. 41, pp. 577–88.10.1016/0956-7151(93)90088-A ↗
35. M. Zehetbauer: Acta Metall. Mater., 1993, vol. 41, pp. 589–99.10.1016/0956-7151(93)90089-B ↗
36. O.B. Pederson, L.M. Brown, and W.M. Stobbs: Acta Metall., 1981, vol. 29, pp. 1843–50.10.1016/0001-6160(81)90110-3 ↗
37. H. Mughrabi: Mater. Sci. Eng., 1987, vol. 85, pp. 15–31.10.1016/0025-5416(87)90463-0 ↗
38. E. Nes: Progr. Mat. Sci., 1998, vol. 41, pp. 129–93.10.1016/S0079-6425(97)00032-7 ↗
39. R. Wagner and R. Kampmann: in Materials Science and Technology: A Comprehensive Treatment, R.W. Cahn, P. Haasen, and E.J. Kramer, eds., VCH Publishing, New York, NY, 1991, vol. 5, pp. 213–304.
40. I.J. Polmear: Light Metals: Metallurgy of the Light Metals, ed., 2nd eds., Edward Arnold, London, p. 20.