Creep characteristics of a diecast AM50 magnesium alloy
Source abstract
Abstract
Tensile creep tests were conducted to examine the creep behavior of a diecast AM50 magnesium alloy in the temperature range from 423 to 498 K. A normal transient creep stage is followed by a minimum creep rate stage and finally by an accelerating stage at each creep condition. The stress exponent of the minimum creep rate, n, increases from ∼5 at lower stresses to ∼10 at higher stresses at each temperature, and the value of n changes at the yield stress of the alloy. The activation energies for the creep, Q c , are determined to be 121±10 and 162 kJ/mol, at lower and higher stresses, respectively. It is concluded that the creep of the diecast AM50 alloy is controlled by the high-temperature climb of dislocations, whereas the instantaneous plastic strain introduced by the higher stress of the creep test is assumed to cause the increased values of n and Q c .
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. B.L. Mordike and T. Ebert: Mater. Sci. Eng., 2001, vol. A302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
2. V. Sklenicka, M. Pahutova, K. Kucharova, M. Svoboda, and T.G. Langdon: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 883–89.10.1007/s11661-002-0158-6 ↗
3. G.S. Cole: Mater. Sci. Forum, 2003, vols. 419-422, pp. 43–50.10.4028/www.scientific.net/MSF.419-422.43 ↗
4. S. Schumann and H. Friedrich: Mater. Sci. Forum, 2003, vols. 419–422, pp. 51–56.10.4028/www.scientific.net/MSF.419-422.51 ↗
5. T. Kaneko and M. Suzuki: Mater. Sci. Forum, 2003, vols. 419–422, pp. 67–72.10.4028/www.scientific.net/MSF.419-422.67 ↗
6. A. Luo and M.O. Pekguleryuz: J. Mater. Sci., 1994, vol. 29, pp. 5259–71.10.1007/BF01171534 ↗
7. M. Suzuki, H. Sato, K. Maruyama, and H. Oikawa: Mater. Sci. Eng., 1998, vol. A252, pp. 248–55.10.1016/S0921-5093(98)00662-5 ↗
8. K. Maruyama, M. Suzuki, and H. Sato: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 875–82.10.1007/s11661-002-0157-7 ↗
9. H. Westengen: Science and Engineering of Light Metals, The Japan Institute of Light Metals, Tokyo, 1991, pp. 77–84.
10. E.M. Gutman, Y. Unigovski, M. Levkovich, Z. Koren, E. Aghion, and M. Dangur: Mater. Sci. Eng., 1997, vols. A234–A236, pp. 880–83.10.1016/S0921-5093(97)00363-8 ↗
11. M. Regev, E. Aghion, and A. Rosen: Mater. Sci. Eng., 1997, vols. A234–A236, pp. 123–26.10.1016/S0921-5093(97)00215-3 ↗
12. E.M. Gutman, Y. Unigovski, M. Levkovitch, and Z. Koren: J. Mater. Sci. Lett., 1998, vol. 17, pp. 1787–89.10.1023/A:1006601419020 ↗
13. W. Blum, P. Zhang, B. Watzinger, B.V. Grossmann, H. Lipowski, and H.G. Haldenwanger: Mater. Sci. Forum, 2000, vols. 350–351, pp. 141–50.10.4028/www.scientific.net/MSF.350-351.141 ↗
14. W. Blum, P. Zhang, B. Watzinger, B.V. Grossmann, and H.G. Haldenwanger: Mater. Sci. Eng., 2001, vols. A319–A321, pp. 735–40.10.1016/S0921-5093(00)02016-5 ↗
15. S. Kamado, I.A. Anyanwu, Y. Oshima, and Y. Kojima: Proc. 4th Pacific Rim Int. Conf. on Advanced Materials and Processing, The Japan Institute of Metals, Sendai, 2001, pp. 1167–70.
16. M. Regev, O. Botstein, M. Bamberger, and A. Rosen: Mater. Sci. Eng., 2001, vol. A302, pp. 51–55.10.1016/S0921-5093(00)01353-8 ↗
17. I.P. Moreno, T.K. Nandy, J.W. Jones, J.E. Allison, and T.M. Pollock: Scripta Mater., 2003, vol. 48, pp. 1029–34.10.1016/S1359-6462(02)00595-X ↗
18. Y. Terada, N. Ishimatsu, R. Sota, T. Sato, and K. Ohori: Mater. Sci. Forum, 2003, vols. 419–422, pp. 459–64.10.4028/www.scientific.net/MSF.419-422.459 ↗
19. Y. Terada, R. Sota, N. Ishimatsu, T. Sato, and K. Ohori: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3029–32.10.1007/s11661-004-0046-3 ↗
20. K. Lovold: Z. Metallkd., 1976, vol. 67, pp. 514–17.
21. W.K. Miller: Metall. Trans. A, 1991, vol. 22A, pp. 873–77.10.1007/BF02658997 ↗
22. S.R. Agnew, S. Viswanathan, E.A. Payzant, Q. Han, K.C. Liu, and E.A. Kenik: Magnesium Alloys and Their Applications, Wiley-VCH, Weinheim, 2000, pp. 687–92.
23. A.A. Luo, M.P. Balogh, and B.R. Powell: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 567–74.10.1007/s11661-002-0118-1 ↗
24. I.J. Polmear: Mater. Sci. Technol., 1994, vol. 10, pp. 1–16.10.1179/mst.1994.10.1.1 ↗
25. R.M. Wang, A. Eliezer, and E.M. Gutman: Mater. Sci. Eng., 2003, vol. A355, pp. 201–07.10.1016/S0921-5093(03)00065-0 ↗
26. T. Ito and H. Shirai: J. Jpn. Inst. Light Met., 1992, vol. 42, pp. 707–19.10.2464/jilm.42.707 ↗
27. B.L. Mordike: J. Jpn. Inst. Light Met., 2001, vol. 51, pp. 2–13.10.2464/jilm.51.E2 ↗
28. N. Ishimatsu: Master’s Thesis, Tokyo Institute of Technology, Tokyo, 2004.
29. P.E. Bennett and G.M. Sinclair: Trans. ASME, Ser. D, 1966, vol. 88, pp. 518–24.10.1115/1.3645890 ↗
30. A.K. Shoemaker and S.T. Rolfe: Eng. Fract. Mech., 1971, vol. 2, pp. 319–39.10.1016/0013-7944(71)90017-8 ↗
31. K. Nakajima: Doctoral Thesis, Tokyo Institute of Technology, Tokyo, 1992.
32. K. Mashino, M. Koo, T. Matsuo, and M. Kikuchi: JSPS Report 123rd Committee on Heat-Resisting Metals and Alloys, 1992, vol. 33, pp. 49–57.
33. O.D. Sherby and P.M. Burke: Progr. Mater. Sci., 1968, vol. 13, pp. 325–90.10.1016/0079-6425(68)90024-8 ↗
34. R.W. Evans and B. Wilshire: Creep of Metals and Alloys, The Institute of Metals, London, 1985.
35. J. Cadek: Creep in Metallic Materials, Elsevier, Amsterdam, 1988.
36. M.E. Kassner and M.T. Perez-Prado: Fundamentals of Creep in Metals and Alloys, Elsevier, Amsterdam, 2004.
37. B. Burton: Diffusional Creep in Polycrystalline Materials, Trans Tech, Bay Village, OH, 1977.
38. B.A. Wilcox and A.H. Clauer: Trans. AIME, 1966, vol. 236, pp. 570–80.
39. M. Pahutova, J. Cadek, and V. Cerny: J. Nucl. Mater., 1976, vol. 61, pp. 285–96.10.1016/0022-3115(76)90267-1 ↗
40. F.R.N. Nabarro: Report of a Conference on Strength of Solids, The Physical Society, London, 1948, pp. 75–90.
41. C. Herring: J. Appl. Phys., 1950, vol. 21, pp. 437–45.10.1063/1.1699681 ↗
42. R.L. Coble: J. Appl. Phys., 1963, vol. 34, pp. 1679–82.10.1063/1.1702656 ↗
43. P.G. Shewmon and F.N. Rhines: Trans. AIME, 1954, vol. 200, pp. 1021–25.
44. P.G. Shewmon: Trans. AIME, 1956, vol. 206, pp. 918–22.
45. I.G. Crossland and R.B. Jones: Met. Sci., 1977, vol. 11, pp. 504–08.10.1179/030634577790432848 ↗
46. G. Moreau, J.A. Cornet, and D. Calais: J. Nucl. Mater., 1971, vol. 38, pp. 197–202.10.1016/0022-3115(71)90043-2 ↗
47. S. Takeuchi and A.S. Argon: Acta Metall., 1976, vol. 24, pp. 883–89.10.1016/0001-6160(76)90036-5 ↗
48. P. Zhang, B. Watzinger, and W. Blum: Phys. Status Solidi (a), 1999, vol. 175, pp. 481–89.10.1002/(SICI)1521-396X(199910)175:2<481::AID-PSSA481>3.0.CO;2-J ↗