Development of Bimodal Grain Structures in Nb-Containing High-Strength Low-Alloy Steels during Slab Reheating
Source abstract
Abstract
Bimodal (mixed coarse and fine) grain structures, which have been observed in some Nb-containing thermomechanically-controlled rolled steel plates, adversely affect their mechanical properties by causing scatter in cleavage fracture stress values. It is known that bimodal grain structures can develop during reheating prior to rolling; however, no quantitative predictions of the level of bimodality or the critical reheat temperatures for formation have been reported. In this article, three high-strength low-alloy (HSLA) steel slabs with varying microalloying additions (Ti, Nb, and V) have been characterized in the as-continuously cast and reheated (to various temperatures in the range 1050 °C to 1225 °C) conditions to determine the link between their grain size distribution (and any bimodality observed) and the microalloy precipitate type, size, and distribution. The as-cast slabs showed inhomogeneous microalloying precipitate distributions with the separation between precipitate-rich and precipitate-poor regions being consistent with interdendritic segregation and hence, the secondary dendrite arm spacing (SDAS). The susceptibility of the slabs to the formation of bimodality, based on the steel chemical compositions and critical reheat temperature ranges has been identified, both experimentally and theoretically using ThermoCalc (Thermo-Calc Software, Stockholm, Sweden) modeling of precipitate stability in the solute-rich and the solute-depleted regions formed during casting.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. D.A. Porter and K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Stanley Thornes Ltd., Cheltenham, UK, 2000, pp. 139–242
2. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, UK, 1997, Book 615, pp. 230–60
3. H.J. Kertenbach, J.A. Rodrigues, J.R. Dermonde: Mater. Sci. Technol., 1985, vol. 5, pp. 29–3510.1179/mst.1989.5.1.29 ↗
4. I. Tamura, C. Ouchi, T. Tanaka, H. Sekine: Thermo-Mechanical Processing of HSLA Steels, Butterworths, Stoneham, MA, 1988, pp. 39–91
5. J.R. Wilcox, R.W.K. Honeycombe: Mater. Sci. Technol., 1987, vol. 3, pp. 849–5410.1179/mst.1987.3.10.849 ↗
6. A.J. Couch: Ph.D. Thesis, University of Leeds, Leeds, United Kingdom, 2001
7. Z. Chen, M.H. Loretto, R.C. Cochrane: Mater. Sci. Technol., 1987, vol. 3, pp. 836–4410.1179/mst.1987.3.10.836 ↗
8. C.L. Davis, M. Strangwood: J. Mater. Sci., 2002, vol. 37, pp. 1083–9010.1023/A:1014342800399 ↗
9. C. Zener: quoted in C.S. Smith, Trans. AIME, 1948, vol. 175, pp. 15–51
10. L.J. Cuddy, J.C. Raley: Metall. Trans. A, 1983, vol. 14A, pp. 1989–9510.1007/BF02662366 ↗
11. E.J. Palmiere, C.I. Garcia, A.J. DeArdo: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 277–8610.1007/BF02647973 ↗
12. O. Flores, L. Martinez: J. Mater. Sci., 1997, vol. 32, pp. 5985–9110.1023/A:1018667111981 ↗
13. M.J. Luton, R. Darvel, R.A. Petkovic: Metall. Trans. A, 1980, vol. 11A, pp. 411–2010.1007/BF02654565 ↗
14. B. Dutta, C.M. Sellers: Mater. Sci. Technol., 1987, vol. 3, pp. 197–20710.1179/mst.1987.3.3.197 ↗
15. S.J. Wu, C.L. Davis: J. Microsc., 2004, vol. 213, pp. 262–7210.1111/j.0022-2720.2004.01311.x ↗
16. D. Bhattacharjee, J.F. Knott, C.L. Davis: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 121–3010.1007/s11661-004-0115-7 ↗
17. S.J. Wu, C.L. Davis: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 456–60
18. J.H. Chen, L. Zhu, H. Ma: Acta Metall. Mater., 1990, vol. 38, pp. 2527–3510.1016/0956-7151(90)90264-H ↗
19. D. Chakrabarti, C.L. Davis, M. Strangwood: Trans. Indian Inst. Met., 2006, vol. 59 (2), pp. 212–23
20. D. Chakrabarti, C.L. Davis, M. Strangwood: Mater. Sci. Forum, 2005, vols. 500–501, pp. 613–2010.4028/www.scientific.net/MSF.500-501.613 ↗
21. D. Chakrabarti, C.L. Davis, and M. Strangwood: Conf. Proc. Solid-Solid Phase Transformation in Inorganic Materials, Phoenix, AZ, May 29–June 3, TMS, Warrendale, PA, 2005, pp. 629–34
22. D. Chakrabarti, C.L. Davis, M. Strangwood: Mater. Charact., 2007, vol. 58 (5), pp. 423–3810.1016/j.matchar.2006.06.014 ↗
23. G. Krauss: Metall. Mater. Trans. B, 2003, vol. 34B, pp. 781–9210.1007/s11663-003-0084-z ↗
24. T. Gladman: Proc. R. Soc. London, 1966, vol. 294, pp. 298–30910.1098/rspa.1966.0208 ↗
25. M. Hillert: Acta Metall., 1965, vol. 13, pp. 227–3810.1016/0001-6160(65)90200-2 ↗