Hot rolling texture development in CMnCrSi dual-phase steels
Source abstract
Abstract
The amount of strain below the temperature of nonrecrystallization, Tnr, has an important influence on the phase fractions and the final crystallographic texture of a hot-rolled dual-phase ferrite+martensite CMnCrSi steel. The final texture is influenced by three main microstructural processes: the recrystallization of the austenite, the austenite deformation, and the austenite-to-ferrite transformation. The amount of strain below Tnr plays a major role in the relative amounts of deformed and recrystallized austenite after rolling. Recrystallized and deformed austenite have clearly different texture components and, due to the specific lattice correspondence relations between the parent austenite phase and its transformation products, the resulting ferrite textures are different as well. In addition, austenite deformation textures result from either dislocation glide or the combination of dislocation glide and mechanical twinning, depending on the stacking fault energy (SFE). The texture components in hot-rolled dual-phase steels were studied by means of X-ray diffraction (XRD) measurements and orientation imaging microscopy (OIM). A clear crystallographic orientation difference was observed between the ferrite phase, transformed at temperatures near Ar3, and the ferritic bainite and martensite phases, formed at lower temperatures. The results suggest that the primary ferrite, nucleated at temperatures close to Ar3, transformed from the deformed austenite. The low-temperature constituents, bainite and martensite, form in the recrystallized austenite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. D.T. Llewellyn and D.J. Hillis: Ironmaking and Steelmaking, 1996, vol. 23 (6), pp. 471–78.
2. T. Waterschoot, B.C. De Cooman, D. Vanderschueren, and B. Staelens: Proc. Thermomechanical Processing of Steels Conf., May 24–26, 2000, IOM Communications, London, pp. 407–17.
3. A.R. Marder: Metall. Trans. A, 1981, vol. 12A, pp. 1569–79.10.1007/BF02643562 ↗
4. R.G. Davies: Metall. Trans. A, 1978, vol. 9A, pp. 41–52.10.1007/BF02647169 ↗
5. W.W. Cias: Climax Molybdenum Company, Greenwich, CT.
6. C. Mesplont, T. Waterschoot, B.C. De Cooman, S. Vandeputte, and D. Vanderschueren: Proc. Thermomechanical Processing of Steels Conf., May 24–26, 2000, IOM Communications, London, pp. 495–504.
7. J.J. Jonas: IF Steels 2000 Proc., Pittsburgh, PA, June 5–7, 2000, ISS, Warrendale, PA, pp. 233–46.
8. R.K. Ray, M.P. Butron-Guillen, J.J. Jonas, and G.E. Ruddle: Iron Steel Inst. Jpn. Int., 1992, vol. 32 (2), pp. 203–12.10.2355/isijinternational.32.203 ↗
9. M.P. Butron-Guillen, C.S. Da Costa Viana, and J.J. Jonas: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1755–68.10.1007/s11661-997-0107-5 ↗
10. B. Hutchinson, L. Ryde, and E. Lindh: Mater. Sci. Eng., 1998, vol. A257, pp. 9–17.10.1016/S0921-5093(98)00820-X ↗
11. L. Kestens and J.J. Jonas: Met. Mater., 1999, vol. 5, pp. 419–27.10.1007/BF03026154 ↗
12. F. Barrato, R. Barbosa, S. Yue, and J.J. Jonas: Proc. Int. Conf. Physical Metallurgy of Thermomechanical Processing of Steel and Other Metals, I. Tamura, eds., ISIJ, Tokyo, 1988, pp. 383–89.
13. F.S. LePera: JOM, 1980, Mar. pp. 38–39.10.1007/BF03354553 ↗
14. L. Kestens, N. Yoshinaga, D. Vanderschueren, and B.C. De Cooman: IF Steels 2000 Proc., Pittsburgh, PA, June 5–7, 2000, ISS, Warrendale, PA, pp. 271–78.
15. L. Duprez, B.C. De Cooman, and N. Akdut: 6th World DUPLEX Stainless Steel Conf., Venezia, Oct. 17–20, 2000, Associazione Italiana Metallurgia, Milan, Italy, pp. 355–66.
16. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier Science Ltd., New York, NY, 1995, pp. 44–52.