Mechanical Properties of Cast Ti-6Al-4V Lattice Block Structures
Source abstract
Abstract
Ti-6Al-4V lattice block structure panels were fabricated using an aerospace-quality investment casting process. Testing in compression, bending, and impact show that high strength, ductility, and energy absorption are achieved for both individual struts and full panels, despite the intricacies involved with casting fine struts (1.6 or 3.2 mm in diameter) from a highly reactive, poor-fluidity liquid titanium alloy. The panel stress-strain curve calculated by finite-element modeling correlates well with experimental results, indicating that the occasional defects, which are common to aerospace grade castings and may be present in the struts and nodes, have little detrimental effect on the overall panel compressive properties.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · High-Velocity Impact and Material Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. J.C. Wallach, L.J. Gibson: Int. J. Solids Struct., 2001, vol. 38, pp. 7181–9610.1016/S0020-7683(00)00400-5 ↗
2. S. Chiras, D.R. Mumm, A.G. Evans, N. Wicks, J.W. Hutchinson, K. Dharmasena, H.N.G. Wadley, S. Fichter: Int. J. Solids Struct., 2002, vol. 39, pp. 4093–411510.1016/S0020-7683(02)00241-X ↗
3. F.W. Zok, H.J. Rathbun, Z. Wei, A.G. Evans: Int. J. Solids Struct., 2003, vol. 40, pp. 5707–2210.1016/S0020-7683(03)00375-5 ↗
4. N. Wicks, J.W. Hutchinson: Mech. Mater., 2004, vol. 36, pp. 739–5110.1016/j.mechmat.2003.05.003 ↗
5. J. Zhou, P. Shrotriya, W.O. Soboyejo: Mech. Mater, 2004, vol. 36, pp. 723–3710.1016/j.mechmat.2003.08.007 ↗
6. V.S. Deshpande, N.A. Fleck, M.F. Ashby: J. Mech. Phys. Solids, 2001, vol. 49, pp. 1747–6910.1016/S0022-5096(01)00010-2 ↗
7. D.J. Sypeck: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 125–3110.1007/s11663-005-0012-5 ↗
8. K. Tantikom, T. Aizawa, T. Mukai: Int. J. Solids Struct., 2005, vol. 42, pp. 2199–221010.1016/j.ijsolstr.2004.09.028 ↗
9. J. Wang, A.G. Evans, K. Dharmasena, H.N.G. Wadley: Int. J. Solids Struct., 2003, vol. 40, pp. 6981–8810.1016/S0020-7683(03)00349-4 ↗
10. D.T. Queheillalt, H.N.G. Wadley: Metall. Mater. Trans. A, 2005, vol. 39A, pp. 132–37
11. D.T. Queheillalt, H.N.G. Wadley: Acta Mater., 2005, vol. 53, pp. 303–1310.1016/j.actamat.2004.09.024 ↗
12. F.W. Zok, H.J. Rathbun, M. He, E. Ferri, C. Mercer, R.M. McMeeking, A.G. Evans: Philos. Mag., 2005, vol. 85, pp. 3207–3410.1080/14786430500073945 ↗
13. H.J. Rathbun, F.W. Zok, S.A. Waltner, C. Mercer, A.G. Evans, D.T. Queheillalt, H.N.G. Wadley: Acta Mater., 2006, vol. 54, pp. 5509–1810.1016/j.actamat.2006.07.016 ↗
14. P. Heinl, A. Rottmair, C. Körner, R.F. Singer: Adv. Eng. Mater., 2007, vol. 9, pp. 360–6410.1002/adem.200700025 ↗
15. D.M. Elzey, H.N.G. Wadley: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2689–9910.1007/s11661-999-0309-0 ↗
16. D.T. Queheillalt, B.W. Choi, D.S. Schwartz, H.N.G. Wadley: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 261–7310.1007/s11661-000-0070-x ↗
17. D.C. Dunand: Adv. Eng. Mater., 2004, vol. 6, pp. 369–7610.1002/adem.200405576 ↗
18. W.B. Han, K.F. Zhang, G.F. Wang, X.J. Zhang: J. Mater. Sci. Technol., 2005, vol. 21, pp. 60–6210.1179/174328405X47618 ↗
19. X. Huang, N.L. Richards: Welding J., 2004, vol. 83, pp. 73S–81S
20. J. Pilling, N. Ridley: Superplasticity in Crystalline Solids, The Institute of Metals, London, 1989, pp. 175–195
21. L. Nastac, M.N. Gungor, I. Ucok, K.L. Klug, W.T. Tack: Int. J. Cast Met. Res., 2006, vol. 19, pp. 73–9310.1179/136404605225023225 ↗
22. R. Boyer, G. Welsch, E.W. Collings: Materials Properties Handbook: Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 494–526
23. S.P. Timoshenko, J.M. Gere: Mechanics of Materials, D. Van Nostrand Company, New York, NY, 1972, pp. 113–119