Recrystallization and grain growth of cold-drawn gold bonding wire
Source abstract
Abstract
Recrystallization and grain growth of gold bonding wire have been investigated with electron back-scatter diffraction (EBSD). The bonding wires were wire-drawn to an equivalent strain greater than 11.4 with final diameter between 25 and 30 µm. Annealing treatments were carried out in a salt bath at 300 °C, and 400 °C for 1, 10, 60 minutes, and 1 day. The textures of the drawn gold wires contain major 〈111〉, minor 〈100〉, and small fractions of complex fiber components. The 〈100〉 oriented regions are located in the center and surface of the wire, and the complex fiber components are located near the surface. The 〈111〉 oriented regions occur throughout the wire. Maps of the local Taylor factor can be used to distinguish the 〈111〉 and 〈100〉 regions. The 〈111〉 oriented grains have large Taylor factors and might be expected to have higher stored energy as a result of plastic deformation compared to the 〈100〉 regions. Both 〈111〉 and 〈100〉 grains grow during annealing. In particular, 〈100〉 grains in the surface and the center part grow into the 〈111〉 regions at 300 °C and 400 °C. Large misorientations (angles >40 deg) are present between the 〈111〉 and 〈100〉 regions, which means that the boundaries between them are likely to have high mobility. Grain average misorientation (GAM) is greater in the 〈111〉 than in the 〈100〉 regions. It appears that the stored energy, as indicated by geometrically necessary dislocation content in the subgrain structure, is larger in the 〈111〉 than in the 〈100〉 regions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. T.H. Ramsey: Solid State Technol., 1973, vol. 16, pp. 43–47.10.1016/0038-1101(73)90124-X ↗
2. S. Omiyama and Y. Fukui: Gold Bull., 1980, vol. 15, p. 43.10.1007/BF03214605 ↗
3. B.L. Gehman: Solid State Technol., 1980, vol. 23, pp. 84–91.
4. K.T. Aust and J.W. Rutter: Trans, TMS-AIME, 1959, vol. 215, pp. 119–27.
5. E.M. Fridman, C.V. Kopezky, and L.S. Shvindlerman: Z. Metallkd., 1975, vol. 66, pp. 533–39.
6. K. Busch, H.U. Künzi, and B. Ilschner: Scripta Metall., 1988, vol. 22, pp. 501–05.10.1016/0036-9748(88)90013-0 ↗
7. K. Hausmann, B. Ilschner, and H.U. Künzi: DVS Berichte, 1986, vol. 102, pp. 69–102.
8. R. Hofbeck, K. Hausmann, B. Ilschner, and H.U. Künzi: Scripta Metall., 1986, vol. 20, pp. 1601–05.10.1016/0036-9748(86)90403-5 ↗
9. G. Qi and S. Zhang: J. Mater. Processing Technol., 1997, vol. 68, pp. 288–93.10.1016/S0924-0136(96)00034-9 ↗
10. G. Linßen, H.D. Mengelberg, and H.P. Stüwe: Z. Metallkd., 1964, vol. 55, pp. 600–04.
11. E. Aernouldt, I. Kokubo, and H.P. Stüwe: Z. Metallkd., 1966, vol. 57, pp. 216–20.
12. J.J. Heizmann, C. Laruelle, A. Vadon, and A. Abdellaoui: ICOTOM11 Proc., Xi’an, China, Z. Liang, L. Zuo, Y. Chu, eds., 1996, pp. 266–72.
13. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24.
14. A.T. English and G.Y. Chin: Acta Metall., 1965, vol. 13, 1013–16.10.1016/0001-6160(65)90010-6 ↗
15. H. Ahlborn: Z. Metallkd, 1965, vol. 56, pp. 205–15.
16. H. Ahlborn: Z. Metallkd., 1965, vol. 56, pp. 411–20.
17. T. Montesin and J.J. Heizmann: J. Appl. Cryst., 1992, vol. 25, pp. 665–73.10.1107/S0021889892004849 ↗
18. K. Rajan and R. Petkie: Mater. Sci. Eng., 1998, vol. A257 pp. 185–97.10.1016/S0921-5093(98)00838-7 ↗
19. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Elsevier Science Ltd, Oxford, U.K., 1995, p. 335.
20. C. Herring: The Physics of Powder Metallurgy, McGraw-Hill Book Company, New York, NY, 1951, p. 143.
21. D. Kinderlehrer, I. Livshits, S. Ta’asan, and E.E. Mason: ICOTOM12 Proc., Montreal, CA, J. A. Szpunar, ed., 1999, pp. 1643–49.
22. C.C. Yang, A.D. Rollett, and W.W. Mullins: Scripta Mater., 2001, vol. 44, pp. 2735–40.10.1016/S1359-6462(01)00960-5 ↗
23. REDS, Reprocessing of EBSD Data in SNU, User Manual, Texture Control Lab, Seoul National University, Seoul, Korea, 2002.
24. OIM 2.6, Software for analysis of electron backscatter diffraction patterns, User Manual, TSL, U.S., 1993–1997.
25. S.I. Wright, B.L. Adams, and K. Kunze: Mater. Sci. Eng., 1993, A160, pp. 229–40.10.1016/0921-5093(93)90452-K ↗
26. OXFORD Instruments INCA Suite version 4.0, Oxford Instruments, U.K., 2002.
27. F.J. Humphreys: J. Mater. Sci., 2001, vol. 36, pp. 3833–54.10.1023/A:1017973432592 ↗
28. J. Ohser and F. Müchklich: Statistical Analysis of Microstructures in Materials Science, John Wiley & Sons, Ltd., New York, NY, 2000, ch. 5.
29. N.R. Barton and R.R. Dawson: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1967–75.10.1007/s11661-001-0009-x ↗
30. Morton E. Gurtin: An Introduction to Continuum Mechanics, vol. 158, Mathematice in Science and Engineering, Academic Press, New York, NY, 1981, sect. 36.
31. Morris W. Hirsch and Stephen Smale: Differential Equations, Dynamical Systems, and Linear Algebra, Pure and Applied Mathematics, Academic Press, New York, NY, 1974, sect. 5.3.
32. V. Randle: The Measurement of Grain Boundary Geometry, Institute of Physics, 1993, chs. 2–3.
33. A. Heinz and P. Neumann: Acta Cryst., 1991, vol. A47, pp. 780–89.10.1107/S0108767391006864 ↗
34. P. Neumann: Text. Microstr., 1991, vols. 14–18, pp. 53–58.10.1155/TSM.14-18.53 ↗
35. J.K. Mackenzie: Biometrika, 1958, vol. 45, pp. 229–40.10.1093/biomet/45.1-2.229 ↗
36. D.C. Handscomb: Can. J. Math., 1958, vol. 10, pp. 85–88.10.4153/CJM-1958-010-0 ↗
37. S. Kohara, M.N. Parthasarathi, and P.A. Beck: Trans. TMS-AIME, 1958, vol. 212, p. 875.
38. G.Y. Chin, W.L. Mammel, and M.T. Dolan: Trans. TMS-AIME, 1967, vol. 239, p. 1854.