journal article·2000-01

Substructural changes during hot deformation of an Fe-26Cr ferritic stainless steel

Fei Gao, Baoyun Song, Yourong Xu, Kenong Xia

Publisher page

Abstract

Dynamic softening and substructural changes during hot deformation of a ferritic Fe-26Cr stainless steel were studied. The flow stress increased to reach a steady state in all the cases and the steady-state stress decreased with decreasing Z, the Zener-Hollomon parameter. A constant subgrain size was observed to correspond to the steady-state flow and the steady-state subgrain size increased with decreasing Z. Substructure examinations revealed that elongated, pancake-shaped subgrains formed in the early stage of deformation. Straight sub-boundaries and equiaxed subgrains developed progressively with strain, leading eventually to a stable substructure at strains greater than 0.7. During deformation at 1100 °C, dynamic recrystallization occurred by the migration and coalescence of subboundaries. Dynamic recovery dominated during deformation at 900 °C, resulting in the formation of fine equiaxed subgrains. Based on microstructural observations, the process of substructural changes during hot deformation was described by a schematic diagram.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. J.J. Jonas, C.M. Sellars, and W.J.M. Tegart: Int. Metall. Rev., 1969, vol. 14, pp. 1–24.10.1179/095066069790138056 ↗
2. W. Roberts: in Deformation, Processing, and Structure, G. Krauss, ed., ASM, Metals Park, OH, 1984, pp. 109–84.
3. T. Sakai and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 189–209.10.1016/0001-6160(84)90049-X ↗
4. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng., 1997, vol. A238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
5. S.E. Ion, F.J. Humphreys, and S.H. White: Acta Metall., 1982, vol. 30, pp. 1909–19.10.1016/0001-6160(82)90031-1 ↗
6. D.L. Bournell and H.J. McQueen: J. Mater; Shaping Technol., 1987, vol. 5, pp. 53–73.10.1007/BF02833686 ↗
7. G. Glover and C.M. Sellars: Metall. Trans., 1973, vol. 4, pp. 765–75.10.1007/BF02643086 ↗
8. T. Maki, S. Okaguchi, and I. Tamura: in The 6th Int. Conf. on Strength of Metals and Alloys, R.C. Gifkins, ed., Pergamon Press, New York, NY, 1982, pp. 529–34.10.1016/B978-1-4832-8423-1.50088-2 ↗
9. F. Gao and Y. Xu: Acta Metall. Sinica, 1988, vol. 24, pp. B195-B200.
10. A.N. Belyakov and R.O. Kaibyshev: Phys. Met. Metallogr., 1993, vol. 76, pp. 162–67.
11. P. Cizek, R. Riman, V. Safek, and V. Cerny: Metall. J. (translation of Hutnicke Listy), 1989, vol. 44, pp. 94–101.
12. E.V. Konopleva, M. Sauerborn, H.J. McQueen, N.D. Ryan, and R.G. Zaripova: Mater. Sci. Eng., 1997, vols. A234–A236, pp. 826–29.10.1016/S0921-5093(97)00337-7 ↗
13. P. Cizek and B.P. Wynne: Mater. Sci. Eng., 1997, vol. A230, pp. 88–94.10.1016/S0921-5093(97)00087-7 ↗
14. H.J. McQueen: Metall. Trans. A, 1977, vol. 8A, pp. 807–24.10.1007/BF02661562 ↗
15. C.G. Schmidt, C.M. Young, B. Walser, R.H. Klundt, and O.D. Sherby: Metall. Trans. A, 1982, vol. 13A, pp. 447–56.10.1007/BF02643353 ↗
16. M.R. Drury and F.J. Humphreys: Acta Metall., 1986, vol. 34, pp. 2259–71.10.1016/0001-6160(86)90171-9 ↗