Fracture toughness, fracture morphology, and crack-tip plastic zone of a Zr-based bulk amorphous alloy
Source abstract
Abstract
The elastic constants, fracture toughness, fracture morphology, and crack-tip plastic zone of a bulk amorphous alloy (bulk metallic glass), with the composition Zr-10Al-5Ti-17.9Cu-14.6Ni (at. pct), were investigated. The room-temperature fracture toughness reached values as high as 69 MPa&mrm. However, it showed considerable scatter, which is, at least in part, due to microcrystalline regions in the castings. Controlled crack propagation could not be obtained in chevron-notched specimens. The fracture-surface morphologies of chevron-notched specimens varied as the crack advanced, and this effect is probably related to differences in the crack propagation rate. Controlled fracture resulting in featureless fracture surfaces was observed during in-situ transmission electron microscope (TEM) fracture experiments. The plastic zone of a fatigue-precracked bulk flexure specimen was examined in situ in an atomic-force microscope (AFM). Shear displacements up to 2 &gmm were found. The AFM observations did not reveal any cracks associated with the shear steps. Sectioning of shear steps using a focused ion beam (FIB) with a diameter of 5 nm also did not reveal any cracks.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · Phase-change materials and chalcogenides · Glass properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. A. Inoue, T. Zhang, and T. Masumoto: Mater. Trans., JIM, 1989, vol. 30, pp. 965–72.10.2320/matertrans1989.30.965 ↗
2. A. Peker and W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342–44.10.1063/1.110520 ↗
3. W.L. Johnson: in Bulk Metallic Glasses, W.L. Johnson, A. Inoue, and C.T. Liu, eds., Materials Research Society, Warrendale, PA, 1999, pp. 311–39.
4. A. Inoue: Acta Mater, 2000, vol. 48, pp. 279–306.10.1016/S1359-6454(99)00300-6 ↗
5. A. Inoue and T. Zhang: Mater. Trans., JIM, 1996, vol. 37, pp. 1726–29.10.2320/matertrans1989.37.1726 ↗
6. H.A. Bruck, A.J. Rosakis, and W.L. Johnson: J. Mater. Res., 1996, vol. 11, pp. 503–11.10.1557/JMR.1996.0060 ↗
7. C.J. Gilbert, J.M. Lippmann, and R.O. Ritchie: Scripta Mater, 1998, vol. 38, pp. 537–42.10.1016/S1359-6462(97)00522-8 ↗
8. C.J. Gilbert, V. Schroeder, and R.O. Ritchie: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1739–53.10.1007/s11661-999-0173-y ↗
9. C.J. Gilbert, V. Schroeder, and R.O. Ritchie: in Bulk Metallic Glasses, W.L. Johnson, A. Inoue, and C.T. Liu, eds., Materials Research Society, Warrendale, PA, 1999, pp. 343–54.
10. P. Lowhaphandu and J.J. Lewandowski: Scripta Mater, 1998, vol. 38, pp. 1811–17.10.1016/S1359-6462(98)00102-X ↗
11. K.M. Flores and R.H. Dauskardt: J. Mater. Res., 1999, vol. 14 (3), pp. 638–43.10.1557/JMR.1999.0642 ↗
12. C.J. Gilbert, J.W. Ager, V. Schroeder, and R.O. Ritchie: in Bulk Metallic Glasses, W.L. Johnson, A. Inoue, and C.T. Liu, eds., Materials Research Society, Warrendale, PA, 1999, vol. 554, pp. 191–96.
13. C.J. Gilbert, J.W. Ager, V. Schroeder, R.O. Ritchie, J.P. Lloyd, and J.R. Graham: Appl. Phys. Lett., 1999, vol. 74 (25), pp. 3809–11.10.1063/1.124187 ↗
14. C.T. Liu, L. Heatherly, D.S. Easton, C.A. Carmichael, J.H. Schneibel, C.H. Chen, J.L. Wright, M.H. Yoo, J.A. Horton, and A. Inoue: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1811–20.10.1007/s11661-998-0004-6 ↗
15. D.M. Owen, A.J. Rosakis, and W.L. Johnson: in Bulk Metallic Glasses, W.L. Johnson, A. Inoue, and C.T. Liu, eds., Materials Research Society, Warrendale, PA, 1999, pp. 419–30.
16. J.A. Horton, J.L. Wright, and J.H. Schneibel: in Bulk Metallic Glasses, W.L. Johnson, A. Inoue, and C.T. Liu, eds., Materials Research Society, Warrendale, PA, 1999, vol. 554, pp. 185–90.
17. X.L. Lin, W.L. Johnson, and W.K. Rhim: Mater Trans., JIM, 1997, vol. 38, pp. 473–77.10.2320/matertrans1989.38.473 ↗
18. J.A. Horton: Proc. 40th Ann. Mtg. of EMSA, 1982, pp. 748–49.10.1017/S042482010005603X ↗
19. E. Üstündag, B. Clausen, J.C. Hanan, M.A.M. Bourke, A. Winholtz, and A. Peker: in Bulk Metallic Glasses, W.L. Johnson, A. Inoue, and C.T. Liu, eds., Materials Research Society, Warrendale, PA, 1999, pp. 431–36.
20. C.J. Gilbert, R.O. Ritchie, and W.L. Johnson: Appl. Phys. Lett., 1997, vol. 71, pp. 476–78.10.1063/1.119610 ↗
21. K.M. Flores and R.H. Dauskardt: Scripta Mater, 1999, vol. 41, pp. 937–43.10.1016/S1359-6462(99)00243-2 ↗
22. J.M. Cairney, PR. Munroe, and J.H. Schneibel: Scripta Mater, 2000, vol. 42, pp. 473–78.10.1016/S1359-6462(99)00374-7 ↗
23. A. Leonhard, L.Q. Xing, M. Heilmaier, A. Gebert, J. Eckert, and L. Schultz: Nanostruct. Mat, 1998, vol. 10, pp. 805–17.10.1016/S0965-9773(98)00117-2 ↗