journal article·2003-11

Effect of cooling rate on the as-quenched microstructure and mechanical properties of HSLA-100 steel plates

S. K. Dhua, D. Mukerjee, D. S. Sarma

Publisher page

Abstract

The effect of cooling rate on the as-quenched microstructure and mechanical properties of a 14-mm-thick HSLA-100 steel using various cooling media such as brine, water, oil, air, and furnace has been studied. While quenching in brine, water, and oil resulted in lath martensite structures, the granular bainite and martensite-austenite (M-A) constituents were found in air- or furnace-cooled specimens. The average lath spacing increased slightly on decreasing the cooling rate (300 nm in brine-quenched specimen to 400 nm in oil-quenched specimen). The precipitates of Cu and Nb(C, N) were observed in all the quenching conditions except in the brine-quenched specimen. The as-quenched strength and toughness of the brine-, water-, and oil-quenched specimens were higher (yield strength: 894 to 997 MPa, ultimate tensile strength: 1119 to 1153 MPa, and Charpy V-notch energies: 65 to 70 J at −85 °C) than those of air- and furnace-cooled specimens (yield strength: 640 to 670 MPa, ultimate tensile strength: 944 to 1001 MPa, and Charpy V-notch energies: 10 to 20 J at −85 °C). For industrial production of HSLA-100 steel plates, oil or water quenching is recommended in lower thickness plates (<25 mm). For production of thicker plates, however, water quenching is more suitable.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. R.J. Jesseman and G.J. Murphy: J. Heat Treating, 1984, vol. 3, pp. 228–36.10.1007/BF02833265 ↗
2. M.T. Miglin, J.P. Hirth, A.R. Rosenfield, and W.A.T. Clark: Metall. Trans. A, 1986, vol. 17A, pp. 791–95.10.1007/BF02643854 ↗
3. G.E. Hicho, C.H. Brady, L.C. Smith, and R.J. Fields: J. Heat Treating, 1987, vol. 5, pp. 7–19.10.1007/BF02831616 ↗
4. Takashi Abe, Masayoshi Kurihara, and Histoshi Tagawa: Trans. Iron Steel Inst. Jpn. 1987, vol. 27, pp. 478–84.10.2355/isijinternational1966.27.478 ↗
5. G.E. Hicho and R.J. Fields: J. Heat Treating, 1988, vol. 6, pp. 77–85.10.1007/BF02833108 ↗
6. A.D. Wilson, E.G. Hamburg, D.J. Colvin, S.W. Thompson, and G. Krauss: Proc. Int. Conf. on Microalloyed HSLA Steel, Microalloying ’88, ASM INTERNATIONAL, Metals Park, OH, 1988, pp. 259–75.
7. S.W. Thomson, D.J. Colvin, and G. Krauss: Scripta Metall., 1988, vol. 22, pp. 1069–74.10.1016/S0036-9748(88)80105-4 ↗
8. S.W. Thomson, D.J. Colvin, and G. Krauss: Metall. Trans. A., 1990, vol. 21A, pp. 1493–507.10.1007/BF02672564 ↗
9. S.S. Banadkouki Ghasemi, D. Yu, and D.P. Dunne: Iron Steel Inst. Jpn., 1996, vol. 36, pp. 61–67.10.2355/isijinternational.36.61 ↗
10. S.W. Thompson, D.J. Kolvin, and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1573–88.10.1007/BF02649816 ↗
11. A.D. Wilson: J. Met., 1987, vol. 29, pp. 36–38.
12. S.W. Thompson, D.J. Kolvin, and G. Krauss: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1554–68.
13. S.K. Sen, A. Ray, R. Avtar, S.K. Dhua, P. Jha, P.P. Sengupta, and S. Jha: J. Mater. Eng. Performance, 1998, vol. 7, pp. 504–10.10.1361/105994998770347657 ↗
14. I. LeMay and M.R. Krishnadev: Copper in Iron and Steel, I. LeMay and L.M. Schetky, eds., John Wiley & Sons, New York, NY, 1982, pp. 5–43.
15. B.A. Graville: Proc. Int. Conf. on Welding of HSLA (Microalloyed) Structural Steels, ASM INTERNATIONAL, Metals Park, OH, 1978, pp. 85–101.
16. E.J. Czyryca: Key Engineering Materials, Trans Tech Publications, Aedermanns Switzerland, 1993, vols. 84–85, pp. 491–520.
17. E.J. Czyryca, R.E. Link, R.J. Wong, D.A. Aylor, T.W. Montemarano, and J.P. Gudas: Nav. Eng. J., 1990, May, pp. 63–82.10.1111/j.1559-3584.1990.tb02632.x ↗
18. R.P. Foley and M.E. Fine: Proc. Int. Conf. on Processing, Microstructure and Properties of Microalloyed and Other Modern HSLA Steels, ISS, Warrendale, PA, 1991, pp. 315–30.
19. A.K. Lis, M. Mujahid, C.I. Garcia, and A.J. DeArdo: Speich Symp. Proc., ISS, Warrendale, PA, 1992, pp. 29–38.
20. A.G. Fox, S. Mikalac, and M.G. Vassilaros: Speich Symp. Proc., ISS, Warrendale, PA, 1992, pp. 155–61.
21. J.W. Yoo, W.Y. Choo, and Y.W. Kim: Proc. Int. Conf. on Processing, Microstructures and Properties of Microalloyed and Other Modern HSLA Steels, ISS, Warrendale, PA, 1991, pp. 371–80.
22. M. Mujahid, A.K. Lis, C.I. Garcia, and A.J. DeArdo: J. Mater. Eng. Performance, 1998, vol. 7, pp. 247–57.10.1361/105994998770347981 ↗
23. Guen Chul Hwang, Sunghak Lee, Jang Yong Yoo, and Wung Yong Choo: Mater. Sci. Eng., 1998, vol. A252, pp. 256–68.10.1016/S0921-5093(98)00670-4 ↗
24. S.K. Dhua, D. Mukerjee, and D.S. Sarma: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2259–70.10.1007/s11661-001-0201-z ↗
25. S.K. Dhua, Amitava Ray, and D.S. Sarma: Mater. Sci. Eng. A, 2001, vol. A318, pp. 197–210.10.1016/S0921-5093(01)01259-X ↗
26. B.L. Bramfitt and J.G. Speer: Metall. Trans. A, 1990, vol. 21A, pp. 817–29.10.1007/BF02656565 ↗
27. B.L. Bramfitt and J.G. Speer: Mechanical Working and Steel Processing Proc., 1989, pp. 443–54.
28. G.J.P. Buchi, J.H.R. Page, and M.P. Sidey: J. Iron Steel Inst., 1965, vol. 203, pp. 291–98.
29. W.E. Creswick: Commercial Development of a Rimmed Low Alloy Precipitation Hardening High Strength Steel, ISS Publication 104, Thonet Press, London, England, 1967, pp. 86–92.
30. G. Thomas: The Physical Metallurgy and Alloy Design of Dual Phase Steels, Frontiers in Materials Technologies, M.A. Meyers and O.T. Inal, eds., Elsevier Science Publishers, Amsterdam, 1985, p. 89.
31. M.R. Krishnadev, W.L. Zhang, and J.T. Bowker: Proc. Int. Symp. on Low-Carbon Steels for the 90’s, R. Asfahani and G. Tither, eds., TMS, Warrendale, PA, 1993, pp. 501–09.
32. C. Shiga: Proc. Int. Conf. on the Metallurgy, Welding and Qualification of Microalloyed (HSLA) Steel Weldments, J.J. Hickey, D.G. Howder, and M.D. Randall, eds., AWS, Miami, Florida, 1990, pp. 327–50.
33. Zhang Shouhua, Zhang Hong, and Yuan Yi: Proc. Int. Conf. on HSLA Steels, Metallurgy and Applications, J.M. Gray, T. Ko, Zhang Shouhua, W. Baorong, and Xie Xishan, eds., ASM INTERNATIONAL, Metals Park, OH, 1986, pp. 113–20.