journal article·2001-03

Role of solid-state skeletal sintering during processing of Mo-Cu composites

John L. Johnson, Randall M. German

Publisher page

Abstract

Mo-Cu composites with Mo contents up to 85 wt pct can be processed by either infiltration of a presintered Mo skeleton with liquid Cu or by liquid-phase sintering of mixed Mo and Cu powders. For both cases, the effects of particle size, sintering temperature, and sintering time on densification and microstructural evolution are compared. The effects of transition metal additions on the densification of Mo-Cu are also investigated. The liquid-phase sintering densification rate of Mo-Cu is much slower than in traditional liquid-phase sintering and is similar to the solid-state densification rate of elemental Mo. Furthermore, the poor densification behavior and absence of slumping for compositions up to 50 vol pct Cu indicate that the high dihedral angle of the Mo-Cu system stabilizes the formation of a rigid Mo skeleton during liquid-phase sintering. Results from a computer simulation that takes into account mass transport via both solid-state and liquid-phase mechanisms show that the solubility of Mo in Cu is sufficient for rapid densification, but confirm that the sintering behavior of Mo-20 vol pct Cu is best described by solid-state skeletal sintering. In this case, the liquid phase promotes microstructural coarsening by solution reprecipitation but contributes little to densification because of the rigid Mo skeleton.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Aluminum Alloys Composites Properties · Powder Metallurgy Techniques and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. P.L. Blue: U.S. Patent 3,685,134, Aug. 22, 1972.
2. N.C. Kothari: Powder Metall. Int., 1982, vol. 14 (3), pp. 139–43.
3. W. Neumann and E. Kny: Proc. 12th Int. Plansee Sem. ’89 Conf., Metallwerk Plansee, Reutte, Austria, 1989, vol. 4, pp. 113–37.
4. E. Kny: Proc. 12th Int. Plansee Sem. ’89 Conf., Metallwerk Plansee, Reutte, Austria, 1989, vol. 1, pp. 763–72.
5. C. Williams: Ceram. Bull., 1991, vol. 70 (4), pp. 714–21.
6. J.B. Oenning and I.S.R. Clark: U.S. Patent 4,988,386, Jan. 29, 1991.
7. S. Ludvik, S. Clair, R. Krischmann, and I. Clark: Advances in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1991, vol. 2, pp. 225–39.
8. C. Zweben: JOM, 1992, vol. 44 (7), pp. 15–23.10.1007/BF03222270 ↗
9. T.W. Kirk, S.G. Caldwell, and J.J. Oakes: Advances in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1992, vol. 9, pp. 115–22.
10. J.L. Johnson and R.M. German: Advances in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1993, vol. 4, pp. 201–13.
11. R.M. German, K.F. Hens, and J.L. Johnson: Int. J. Powder Metall., 1994, vol. 30 (1), pp. 91–102.
12. J.L. Johnson, K.F. Hens, and R.M. German: Tungsten and Refractory Metals—1994, Metal Powder Industry Federation, Princeton, NJ, 1995, pp. 246–52.
13. W.S. Wang and K.S. Hwang: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1509–16.10.1007/s11661-998-0366-9 ↗
14. D. Uskokovic, M. Zivkovic, B. Zivanovic, and M.M. Ristic: High Temp.-High Pressures, 1971, vol. 3, pp. 461–66.
15. D. Uskokovi, J. Petkovic, and M.M. Ristic: Sci. Sintering, 1976, vol. 8, pp. 129–48.
16. R.M. German and Z.A. Munir: J. Less-Common Met., 1978, vol. 58, pp. 61–74.10.1016/0022-5088(78)90071-1 ↗
17. R.M. German and C.A. Lombard: Int. J. Powder Metall. Powder Technol., 1982, vol. 18 (2), pp. 147–56.
18. R.M. German: Progr. Powder Metall., 1981, vol. 37, pp. 195–211.
19. R.M. German: Sci. Sintering, 1983, vol. 15, pp. 27–42.
20. P.E. Zovas and R.M. German: Metall. Trans. A, 1984, vol. 15A, pp. 1103–10.10.1007/BF02644704 ↗
21. V.V. Skorokhod, I.V. Uvarova, and T.E. Landau: Sov. Powder Met. Metall. Ceram., 1983, vol. 22, pp. 185–88.10.1007/BF00793912 ↗
22. W.J. Huppmann and W. Bauer: Powder Metall., 1975, vol. 18, pp. 249–58.10.1179/pom.1975.18.36.001 ↗
23. I.H. Moon and J.S. Lee: Powder Metall. Int., 1977, vol. 9, pp. 23–24.
24. I.H. Moon and J.S. Lee: Powder Metall., 1979, vol. 22, pp. 5–7.10.1179/pom.1979.22.1.5 ↗
25. K.V. Sebastian and G.S. Tendolkar: Int. J. Powder Metall., 1979, vol. 15, pp. 45–53.
26. V.V. Panichkina, M.M. Sirotyuk, and V.V. Skorokhod: Sov. Powder Met. Metall. Ceram., 1982, vol. 21, pp. 447–50.10.1007/BF00801752 ↗
27. V.V. Skorokhod, Y.M. Solonin, N.I. Filippov, and A.N. Roshcin: Sov. Powder Met. Metall. Ceram., 1983, vol. 22, pp. 696–99.10.1007/BF00790948 ↗
28. J.S. Lee, W.A. Kaysser, and G. Petzow: Modern Developments in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1984, vol. 15, pp. 489–506.
29. V.V. Skorokhod, V.V. Panichkina, and N.K. Prokushev: Sov. Powder Met. Metall. Ceram., 1986, vol. 25, pp. 621–26.10.1007/BF00796726 ↗
30. N.K. Prokushev and V.P. Smirnov: Sov. Powder Met. Metall. Ceram., 1986, vol. 25, pp. 727–33.10.1007/BF00797302 ↗
31. J.S. Lee, I.S. Ahn, and I.H. Moon: Refractory and Hard Metals, 1986, June, pp. 112–16.
32. J.L. Johnson and R.M. German: Metall. Trans. A, 1993, vol. 24A, pp. 2369–77.10.1007/BF02646516 ↗
33. J.L. Johnson and R.M. German: Int. J. Powder Metall., 1994, vol. 30 (1), pp. 91–102.
34. J.L. Johnson and R.M. German: Metall. Mater. Trans. B, 1996, vol. 27B, pp. 901–09.10.1007/s11663-996-0003-1 ↗
35. J.L. Johnson and R.M. German: Int. J. Powder Metall., 1999, vol. 35 (8), pp. 39–48.
36. R.M. German: Metall. Trans. A, 1985, vol. 16A, pp. 1247–52.10.1007/BF02670329 ↗
37. J.L. Johnson and R.M. German: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 441–50.10.1007/BF02648421 ↗
38. R.M. German: Sintering Theory and Practice, Wiley, New York, NY, 1996, p. 528.
39. H. Jones: Met. Sci. J., 1971, vol. 5, pp. 15–18.10.1179/030634571790439342 ↗
40. S. Farooq: Ph.D. Thesis, Rensselaer Polytechnic Institute, Troy, NY, 1988.
41. H. Fischmeister, A. Kannapan, and Lai-Y.: Phys. Sintering, 1969, vol. 1 (1), pp. G.1-G.13.
42. N.K. Prokushev and V.P. Smirnov: Sov. Powder Met. Metall. Ceram., 1986, vol. 25, pp. 727–33.10.1007/BF00797302 ↗
43. Binary Phase Diagrams, T.B. Massalski, ed., ASM, Metals Park, OH, 1986.
44. R.M. German and E.O. Olevsky: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 3057–67.10.1007/s11661-998-0213-z ↗
45. P.W. Vorhees and M.E. Glicksman: Metall. Trans. A, 1984, vol. 15A, pp. 1081–88.10.1007/BF02644701 ↗
46. S.C. Yang, S.S. Mani, and R.M. German: J. Met., 1990, vol. 42 (4), pp. 16–19.
47. W.A. Kaysser and G. Petzow: Powder Metall., 1985, vol. 28, pp. 145–50.10.1179/pom.1985.28.3.145 ↗
48. C.M. Kipphut, A. Bose, S. Farooq, and R.M. German: Metall. Trans. A, 1988, vol. 19A, pp. 1905–13.10.1007/BF02645192 ↗
49. C.M. Kipphut, R.M. German, A. Bose, and T. Kishi: Advances in Powder Metallurgy, Metal Powder Industries Federation, Princeton, NJ, 1989, vol. 2, pp. 415–29.
50. W.D. Kingery: J. Appl. Phys., 1959, vol. 30, pp. 301–06.10.1063/1.1735155 ↗
51. S. Farooq and R.M. German: Sintering ’87, Elsevier Applied Science, London, 1988, vol. 1, pp. 459–64.
52. J.L. Johnson, A. Upadhyaya, and R.M. German: Advances in Powder Metallurgy and Particulate Materials, Metal Powder Industries Federation, Princeton, NJ, 1995, vol. 3, pp. 219–28.
53. A. Upadhyaya and R.M. German: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2631–38.10.1007/s11661-998-0235-6 ↗
54. V.N. Ermenko, R.V. Minakova, and M.M. Churakov: Sov. Powder Met. Metall. Ceram., 1977, vol. 16, pp. 283–86.10.1007/BF00806131 ↗
55. J.L. Johnson, A. Upadhyaya, and R.M. German: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 857–66.10.1007/s11663-998-0145-4 ↗