Thermodynamic investigations of Cr3C2 and reassessment of the Cr-C system
Source abstract
Abstract
The Gibbs energies of formation for Cr3C2, (Delta _f GCr_3 C_2 ^ circ ), have been obtained from electromotive force (EMF) measurements, in the temperature range 950 to 1150 K, using the following galvanic cells with CaF2 single crystals as the electrolyte: $$Cr, CrF_2 left| {CaF_2 } ight| CrF_2 , Cr_3 C_2 , C(950 to 1150 K)$$ Extreme precautions were taken during the experimental measurements to avoid errors. The reliability and reproducibility of the values were confirmed by careful repetition of several of the experiments. The following equation has been obtained by a linear analysis of the EMF results as a function of temperature: $$Delta _f GCr_3 C_2 ^ circ ( pm 1600) = - 58,857 - 22.344T(J cdot mol - 1 )(950 to 1150 K)$$ The generated values are compared with those reported in the literature. The values of the enthalpy of formation were evaluated by using a third-law analysis, and an average value of Δ f H°298=−71.7 kJ/mol was obtained. The ground-state energy of the hypothetic end-member compound CrC3 in the bcc structure at 0 K was calculated by using the ab initio method. The experimental results obtained, as well as the results from the ab initio calculations, were employed in a reassessment of the Cr-C system using the CALPHAD approach. A new set of parameters for the bcc phase was evaluated using first-principles calculations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties · Thermal and Kinetic Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. M. Hansen: Constitution of Binary Alloys, 2nd ed., McGraw-Hill Book Co., Inc., New York, NY, 1985, pp. 351–52.
2. T.B. Massalski: Binary Phase Diagrams, 2nd ed., the ASM INTERNATIONAL, Materials Park, OH, 1990, p. 558.
3. F.D. Richardson: J. Iron Steel Inst., 1953, vol. 33, pp. 175–80.
4. K.K. Kelley, F.S. Boericke, G.E. Moore, E.H. Huffman, and W.M. Bangert: U.S. Bureau of Mines Report No. 662, United States Government Printing Office, Washington, DC, 1944, pp. 1–15.
5. S. Fujishiro and N.A. Gokcen: Trans. TMS-AIME, 1961, vol. 221, p. 275.
6. M. Gleiser: J. Phys. Chem., 1965, vol. 69, pp. 1771–74.10.1021/j100889a519 ↗
7. A.D. Mah: U.S. Bureau of Mines Report No. 7217, United States Government Printing Office, Washington, DC, 1969, pp. 1–9.
8. A.D. Kulkarni and Worrell: Metall. Trans., 1972, vol. 3, pp. 2363–70.10.1007/BF02647039 ↗
9. H. Kleykamp: Ber. Bunsenges. Phys. Chem., 1969, vol. 73, pp. 354–58.10.1002/bbpc.19690730407 ↗
10. H. Tanaka, Y. Kishida, and A. Yamaguchi: J. Moriyama, Nippon Kinzoku Gakkaishi, 1971, vol. 35, p. 523.
11. R.G. Coltters and G.R. Belton: Metall. Trans. B, 1984, vol. 15B, pp. 517–21.10.1007/BF02657382 ↗
12. H. Mabuchi, N. Sano, and Y. Matsushita: Metall. Trans., 1971, vol. 2, pp. 1503–05.10.1007/BF02913393 ↗
13. S.C. Du, S. Seetharaman, and L.I. Stafansson: Metall. Trans. B, 1989, vol. 20B, pp. 911–17.
14. S. Anthonysamy, K. Ananthasivan, I. Kaliappan, V. Chandramouli, P.R. Vasudeva Rao, C.K. Mathews, and K.T. Jacob: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1919–24.10.1007/BF02651941 ↗
15. H. Kleykamp: J. Alloys Compounds, 2001, vol. 321, pp. 138–45.10.1016/S0925-8388(01)01012-X ↗
16. J.-O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: CALPHAD, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
17. M.W. Chase, C.A. Davies, J.R. Dourey, D.J. Frury, R.A. McDonald, and A.N. Syverud: J. Phys. Chem. Ref. Data, 1985, vol. 14, p. 941.
18. L.D. Teng, R.E. Aune, and S. Seetharaman: J. Alloys Compounds, 2004, accepted for publication.
19. S. Seetharaman, S.C. Du, and A. Jakobsson: in Sensors and Modeling in Materials Processing: Techniques and Applications, R.G. Reddy and J.C. Males, eds., TMS, Warrendale, PA, 1997, pp. 327–44.
20. L.D. Teng, R.E. Aune, and S. Seetharaman: Intermetallics, 2003, vol. 11, pp. 1229–35.10.1016/S0966-9795(03)00163-8 ↗
21. E.K. Storms: The Refractory Carbides, Academic Press, New York, NY, 1967, p. 105.
22. J.-O. Andersson: CALPHAD, Pergamon Journals Ltd., 1987, vol. 11, pp. 271–76.10.1016/0364-5916(87)90045-9 ↗
23. C.E. Wicks and F.E. Block: U.S. Bureau of Mines Bulletin No. 605, United States Government Printing Office, Washington, DC, 1963.
24. I. Barin: Thermochemical Data of Pure Substances, 2nd ed., Part I, VCH, Weinheim, 1993, p. 423.
25. Y.Z. Vintaikin: Fiz. Met. Metalloved., 1963, vol. 16, p. 144.
26. M. Small and E. Ryba: Metall. Trans. A, 1981, vol. 12A, pp. 1389–96.10.1007/BF02643683 ↗
27. J.-O. Andersson: Metall. Trans. A, 1988, vol. 19A, pp. 627–36.10.1007/BF02649276 ↗
28. E. Rudy: Technical Report No. AFML-TR-65-2, 1969, pp. 179–80.
29. O. Knotek, E. Lugscheider, H. Reimann, and H.G. Sasse: Metallwissenschaft Technik, 1981, vol. 35, p. 130.
30. D.S. Bloom and N.J. Grant: AIME Trans., 1950, Jan.
31. J. Met., 1950, vol. 188, pp. 41-43.10.1515/juru.1950.1950.2.41 ↗
32. W.H. Smith: AIME Trans., 1957, Jan.; J. Met., 1957, pp. 47–49.10.1007/BF03398447 ↗
33. S.N. Zemshij and A.P. Fokin: Zurnal Fiziceskoj Chimii, 1967, vol. 41, pp. 93–96.
34. J.J. Poubeau and J. Bigot: Acta Metall., 1985, vol. 33 (6), pp. 1137–41.10.1016/0001-6160(85)90208-1 ↗
35. A.T. Dinsdale: CALPHAD, 1991, vol. 15 (4), pp. 317–425.10.1016/0364-5916(91)90030-N ↗
36. M. Kajihara and M. Hillert: Metall. Trans. A, 1990, vol. 21A, pp. 2777–8710.1007/BF02646072 ↗
37. B.-J. Lee: CALPHAD, 1992, vol. 16, pp. 121–49.10.1016/0364-5916(92)90002-F ↗
38. G. Kresse and J. Joubert: Phys. Rev. B, 1999, vol. 59, pp. 1758–61.10.1103/PhysRevB.59.1758 ↗
39. J.P. Perdew and Y. Wang: Phys. Rev. B, 1992, vol. 45, pp. 13244–13249.10.1103/PhysRevB.45.13244 ↗