Modeling of marangoni-induced droplet motion and melt convection during solidification of hypermonotectic alloys
Source abstract
Abstract
A two-phase volume averaging approach to model Marangoni-induced droplet motion of the minority liquid phase and the convection in the parent melt during solidification of the hypermonotectic alloys is presented. The minority liquid phase decomposed from the parent melt as droplets in the miscibility gap was treated as the second-phase L2. The parent melt including the solidified monotectic matrix was treated as the first phase L1. Both phases were considered as different and spatially interpenetrating continua. The conservation equations of mass, momentum, solute, and enthalpy for both phases, and an additional transport equation for the droplet density, were solved. Nucleation of the L2 droplets, diffusion-controlled growth, interphase interactions such as Marangoni force at the L1-L2 interface, Stokes force, solute partitioning, and heat release of decomposition were taken into account by corresponding source and exchange terms in the conservation equations. The monotectic reaction was modeled by adding the latent heat on the L1 phase during monotectic reaction, and applying an enlarged viscosity to the solidified monotectic matrix. A two-dimensional (2-D) square casting with hypermonotectic composition (Al-10 wt pct Bi) was simulated. This paper focused on Marangoni motion, hence gravity was not included. Results with nucleation, droplet evolution, Marangoni-induced droplet motion, solute transport, and macrosegregation formation were obtained and discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. L. Ratke and S. Diefenbach: Mater. Sci. Eng., 1995, vol. 15 (R), pp. 263–347.10.1016/0927-796X(95)00180-8 ↗
2. B. Predel, L. Ratke, and H. Fredriksson: in Decomposition of Alloys: The Early Stages, H.U. Walter and M.F. Ashhy, eds., Springer-Verlag, Berlin, 1987, pp. 517–65.
3. B. Prinz, A. Romero, and L. Ratke: J. Mater. Sci., 1995, vol. 30, pp. 4715–19.10.1007/BF01153083 ↗
4. L. Ratke, G. Korekt, and S. Drees: Adv. Space Res., 1998, vol. 22, pp. 1227–36.10.1016/S0273-1177(98)00152-5 ↗
5. L. Ratke and G. Korekt: Z. Metallkd., 2000, vol. 91, pp. 919–27.
6. N.O. Young, J.S. Goldstein, and M.J. Block: J. Fluid Mech., 1959, vol. 6, pp. 350–56.10.1017/S0022112059000684 ↗
7. W. Günter: Über die Dynamik von Fluidpartikeln Aufgrund des Marangoni-Effektes, VDI-Verlag, Düsseldorf, Germany, 1993, pp. 1–71.
8. M.G. Velarde: in Materials and Fluids under Low Gravity, L. Ratke, H. Walter, and B. Feuerbacher eds., Springer-Verlag, Berlin, 1995, pp. 283–98.
9. C. Beckermann and R. Viskanta: Appl. Mech. Rev., 1993, vol. 46, pp. 1–27.10.1115/1.3120318 ↗
10. J. Ni and C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349–61.10.1007/BF02651234 ↗
11. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2754–64.10.1007/BF02652369 ↗
12. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2765–83.10.1007/BF02652370 ↗
13. C.Y. Wang and C. Beckermann: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2784–95.
14. C. Beckermann: JOM, 1997, vol. 49, pp. 13–17.10.1007/BF02914649 ↗
15. A.V. Reddy and C. Beckermann: Metall. Mater. Trans. B, 1997, vol. 28B, pp. 479–89.10.1007/s11663-997-0115-2 ↗
16. J. Ni and F.P. Incropera: Int. J. Heat Mass Transfer, 1995, vol. 38, pp. 1271–84.10.1016/0017-9310(94)00236-O ↗
17. J. Ni and F.P. Incropera: Int. J. Heat Mass Transfer, 1995, vol. 38, pp. 1285–96.10.1016/0017-9310(94)00237-P ↗
18. A. Ludwig and M. Wu: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3673–83.10.1007/s11661-002-0241-z ↗
19. M. Wu and A. Ludwig: Adv. Eng. Mater., 2003, vol. 5, pp. 62–66.10.1002/adem.200390010 ↗
20. M. Wu, A. Ludwig, A. Bührig-Polaczek, M. Fehlbier, and P.R. Sahm: Int. J. Heat Mass Transfer, 2003, vol. 46, pp. 2819–32.10.1016/S0017-9310(03)00054-1 ↗
21. S. Diefenbach: Ph.D. Thesis, Ruhr-University Bochum, Bochum, Germany, 1993.
22. W. Oldfield: Trans. ASM, 1966, vol. 59, pp. 945–61.
23. M. Rappaz: Int. Mater. Rev., 1989, vol. 34, pp. 93–123.10.1179/imr.1989.34.1.93 ↗
24. F. Falk: in Immiscible Liquid Metals and Organics, L. Ratke, ed., DGM Informationsgesellschatt mbH, Oberursel, Germany, 1993, pp. 93–100.
25. S.V. Patankar: Numerical Heat Transfer and Fluid Flow, Hemisphere Publishing Corp., Washington, DC, 1980.
26. L. Ratke, S. Dree, S. Diefenbach, B. Pronz, and A. Ahlborn: in Materials and Fluids under Low Gravity, L. Ratke, H. Walter, and B. Feuerbacher, eds., Springer-Verlag, Berlin, 1995, pp. 115–33.
27. P. Thevoz, J.L. Desbiolles, and M. Rappaz: Metall. Trans. A, 1989, vol. 20A, pp. 311–22.10.1007/BF02670257 ↗
28. N. Uebber and L. Ratke: Scripta Metall. Mater., 1991, vol. 25, pp. 1133–37.10.1016/0956-716X(91)90516-4 ↗
29. L. Granasy and L. Ratke: Scripta Metall. Mater., 1993, vol. 28, pp. 1329–34.10.1016/0956-716X(93)90477-A ↗
30. H.U. Walter: Proc. RIT/ESA/SSC Workshop-ESA SP 219, Stockholm, Sweden, 1984, Järva Krog, ed., pp. 47–64.