The effect of sheet processing on the microstructure, tensile, and creep behavior of INCONEL alloy 718
Source abstract
Abstract
The grain size, grain boundary character distribution (GBCD), creep, and tensile behavior of INCONEL alloy 718 (IN 718) were characterized to identify processing-microstructure-property relationships. The alloy was sequentially cold rolled (CR) to 0, 10, 20, 30, 40, 60, and 80 pct followed by annealing at temperatures between 954 °C and 1050 °C and the traditional aging schedule used for this alloy. In addition, this alloy can be superplastically formed (IN 718SPF) to a significantly finer grain size and the corresponding microstructure and mechanical behavior were evaluated. The creep behavior was evaluated in the applied stress (σ a ) range of 300 to 758 MPa and the temperature range of 638 °C to 670 °C. Constant-load tensile creep experiments were used to measure the values of the steady-state creep rate and the consecutive load reduction method was used to determine the values of backstress (σ0). The values for the effective stress exponent and activation energy suggested that the transition between the rate-controlling creep mechanisms was dependent on effective stresses (σ e =σ a σ0) and the transition occurred at σ e ≅ 135 MPa. The 10 to 40 pct CR samples exhibited the greatest 650 °C strength, while IN 718SPF exhibited the greatest room-temperature (RT) tensile strength (>1550 MPa) and ductility (e f >16 pct). After the 954 °C annealing treatment, the 20 pct CR and 30 pct CR microstructures exhibited the most attractive combination of elevated-temperature tensile and creep strength, while the most severely cold-rolled materials exhibited the poorest elevated-temperature properties. After the 1050 °C annealing treatment, the IN 718SPF material exhibited the greatest backstress and best creep resistance. Electron backscattered diffraction was performed to identify the GBCD as a function of CR and annealing. The data indicated that annealing above 1010 °C increased the grain size and resulted in a greater fraction of twin boundaries, which in turn increased the fraction of coincident site lattice boundaries. This result is discussed in light of the potential to grain boundary engineer this alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. T. Watanabe: Res Mechanica, 1984, vol. 11, pp. 47–84.
2. E.M. Lehockey, G. Palumbo, and P. Lin: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 3069–79.10.1007/s11661-998-0214-y ↗
3. B. Alexandreanu, B.M. Capell, and G. Was: Mater. Sci. Eng., 2001, vol. 300A, pp. 94–104.10.1016/S0921-5093(00)01705-6 ↗
4. E.M. Lehockey, G. Palumbo, P. Lin, and A.M. Brennenstuhl: Scripta Mater., 1997, vol. 36 (10), pp. 1211–18.10.1016/S1359-6462(97)00018-3 ↗
5. C. Cheung, U. Erb, and G. Palumbo: Mater. Sci. Eng., 1994, vol. 185A, pp. 39–43.10.1016/0921-5093(94)90925-3 ↗
6. D. Crawford: Ph.D. Thesis, University of Michigan, Ann Arbor, MI, 1991.
7. G. Palumbo and K.T. Aust: Materials Interfaces: Atomic Level Structure and Properties, D. Wolf and S. Yip, eds, Chapman and Hall, New York, NY, 1989, pp. 190–211.
8. G. Palumbo, E.M. Lehockey, and P. Lin: J. Met., 1998, Feb., pp. 40–43.10.1007/s11837-998-0248-z ↗
9. P. Lin, G. Palumbo, U. Erb, and K.T. Aust: Scripta Mater., 1995, vol. 33 (9), pp. 1387–92.10.1016/0956-716X(95)00420-Z ↗
10. G.S. Was, V. Thaveeprungsriporn, and D.C. Crawford: J. Met., 1998, Feb., pp. 44–49.10.1007/s11837-998-0249-y ↗
11. V. Thaveeprungsriporn and G. Was: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2101–12.10.1007/s11661-997-0167-6 ↗
12. E.M. Lehockey and G. Palumbo: Mater. Sci. Eng., 1997, vol. A237, pp. 168–72.10.1016/S0921-5093(97)00126-3 ↗
13. G. Palumbo and K.T. Aust: Acta Metall. Mater., 1990, vol. 38 (11), pp. 2343–52.10.1016/0956-7151(90)90101-L ↗
14. B. Alexandreanu, B.H. Sencer, V. Thaveeprungsriporn, and G. Was: Acta Mater., 2003, vol. 51, pp. 3831–48.10.1016/S1359-6454(03)00207-6 ↗
15. H. Guo, M.C. Chaturvedi, N.L. Richards, and G.S. McMahon: Scripta Mater., 1999, vol. 40 (3), pp. 383–88.10.1016/S1359-6462(98)00427-8 ↗
16. U. Krupp W.M. Kane, C. Laird, and C.J. McMahon, Jr.: Mater. Sci. Eng., 2003, vol. A349, pp. 213–17.10.1016/S0921-5093(02)00753-0 ↗
17. U. Krupp W.M. Kane, X. Liu, O. Ducber, C. Laird, and C.J. McMahon, Jr.: Mater. Sci. Eng., 2004, vols. A387–A89, pp. 409–13.10.1016/j.msea.2004.05.053 ↗
18. A.K. Mukherjee, J.E. Bird, and J.E. Dorn: Trans. ASM, 1969, vol. 62, pp. 155–79.
19. K.R. Williams and B. Wilshire: Met. Sci. J., 1973, vol. 7, pp. 176–79.10.1179/030634573790445695 ↗
20. D. Sidney and B. Wilshire: Met. Sci. J., 1969, vol. 3, p. 56.10.1179/msc.1969.3.1.56 ↗
21. J.D. Parker and B. Wilshire: Met. Sci. J., 1975, vol. 9, p. 248.10.1179/030634575790445053 ↗
22. P.W. Davies, G. Nelmes, K.R. Williams, and B. Wilshire: Met. Sci. J., 1973, vol. 7, pp. 87–92.10.1179/030634573790445659 ↗
23. W.J. Evans and G.F. Harrison: Met. Sci. J., 1976, vol. 10, p. 307.10.1179/msc.1976.10.9.307 ↗
24. R. Lagneborg and B. Bergman: Met. Sci. J., 1976, vol. 10, p. 20.10.1179/030634576790431462 ↗
25. D.D. Sherby and P.M. Burke: Prog. Mater. Sci., 1968, vol. 13, pp. 323–90.10.1016/0079-6425(68)90024-8 ↗
26. J.D. Parker and B. Wilshire: Met. Sci., 1978, Oct., pp. 453–58.10.1179/030634578790433297 ↗
27. R. Lund and W.D. Nix: Acta Metall., 1976, vol. 24, pp. 469–81.10.1016/0001-6160(76)90068-7 ↗
28. C.N. Ahlquist and W.D. Nix: Acta Metall., 1971, vol. 19, pp. 373–85.10.1016/0001-6160(71)90105-2 ↗
29. C.L. Meyers, J.C. Shyne, and O.D. Sherby: Aust. Inst. Met., 1963, vol. 8, p. 171.
30. B.A. Wilcox and A.H. Clauer: Acta Mater., 1972, vol. 20, pp. 743–57.10.1016/0001-6160(72)90103-4 ↗
31. A.H. Clauer and B.A. Wilcox: Met. Sci. J., 1967, vol. 1, p. 86.10.1179/msc.1967.1.1.86 ↗
32. B.A. Wilcox and A.H. Clauer: Met. Sci. J., 1969, vol. 3, p. 26.10.1179/msc.1969.3.1.26 ↗
33. Y. Han and M.C. Chaturvedi: Mater. Sci. Eng., 1987, vol. 85, pp. 59–65.10.1016/0025-5416(87)90467-8 ↗
34. Y. Han and M.C. Chaturvedi: Mater. Sci. Eng., 1987, vol. 89, pp. 25–33.10.1016/0025-5416(87)90246-1 ↗
35. W. Chen and M.C. Chaturvedi: Mater. Sci. Eng., 1994, vol. A183, pp. 81–89.10.1016/0921-5093(94)90892-3 ↗
36. J.C. Gibeling and W.D. Nix: Mater. Sci. Eng., 1980, vol. 45, pp. 123–35.10.1016/0025-5416(80)90218-9 ↗
37. S. Purushothman and J.K. Tien: Acta Mater., 1978, vol. 26, p. 519.10.1016/0001-6160(78)90104-9 ↗
38. J.H. Hausselt and W.D. Nix: Acta Mater., 1977, vol. 25, pp. 595–607.10.1016/0001-6160(77)90001-3 ↗
39. G.D. Smith and D.H. Yates: Proc. Advancements in Synthesis and Processes, Society for the Advancement of Material and Process Engineering, Covina, CA, 1992, pp. M207-M218.
40. G.D. Smith and H.L. Flower: Proc. Superalloys 718, 625, 706 and Various Derivatives, TMS, Warrendale, PA, 1994, pp. 355–64.10.7449/1994/Superalloys_1994_355_364 ↗
41. B.A. Baker: INCO Alloys International Technical Investigation Report No. BAB1323093, INCO, Huntington, WV, Sept. 1993.
42. Y. Huang and P.L. Blackwell: Mater. Sci. Technol., 2003, vol. 19, pp. 461–66.10.1179/026708303225002000 ↗
43. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
44. INCONEL Alloy 718 Bulletin 4th ed., Special Metals Corporation, Huntington, WV, 1985, pp. 1–25.
45. W.C. Liu, Z.L. Chen, and M. Yao: Metall. Mater. Trans., 1999, vol. 30A, pp. 31–40.10.1007/s11661-999-0193-7 ↗
46. Special Metals Corporation, Huntington, WV, unpublished research, 1964.
47. M. Kumar, W.E. King, and A.J. Schwartz: Acta Mater., 2000, vol. 48, pp. 2081–91.10.1016/S1359-6454(00)00045-8 ↗
48. A.J. Schwartz and W.E. King: J. Met., 1998, Feb., pp. 50–55.10.1007/s11837-998-0250-5 ↗
49. M. Qian and J.C. Lippold: Acta Mater., 2003, vol. 51, pp. 3351–61.10.1016/S1359-6454(03)00090-9 ↗
50. V. Randle: The Role of Coincidence Site Lattice in Grain Boundary Engineering, The Institute of Materials, London, 1996, pp. 1–104.
51. P. Davies and V. Randle: Mater. Sci. Technol., 2001, vol. 17, pp. 615–26.10.1179/026708301101510384 ↗
52. D. Lin, G. Palumbo, and K.T. Aust: Scripta Mater., 1997, vol. 36, pp. 1145–49.10.1016/S1359-6462(97)00010-9 ↗
53. V.Y. Gertsman and J.A. Szpunar: Scripta Mater., 1998, vol. 38, pp. 1399–1404.10.1016/S1359-6462(98)00047-5 ↗
54. J.E. Harris: Met. Sci. J., 1973, vol. 7, p. 1.10.1016/0036-9748(73)90170-1 ↗
55. B. Burton: Mater. Sci. Eng., 1973, vol. 11, pp. 337–43.10.1016/0025-5416(73)90124-9 ↗
56. G.S. Ansel and J. Weertman: Trans. TMS-AIME, 1959, vol. 215, p. 838.
57. D. Hull: Introduction to Dislocations, Pergamon, Oxford, United Kingdom, 1975, pp. 188–90.
58. J.P. Dennison, R.J. Llewellyn, and B. Wilshire: J. Inst. Met., 1967, vol. 95, p. 115.
59. D. Sidey and B. Wilshire: Met. Sci. J., 1969, vol. 3, p. 56.10.1179/msc.1969.3.1.56 ↗
60. M.F. Asby: Scripta Mater., 1969, vol. 3, pp. 837–42.10.1016/0036-9748(69)90191-4 ↗
61. H. Gleiter: Acta Metall., 1979, vol. 27, pp. 187–92.10.1016/0001-6160(79)90095-6 ↗
62. F.R.N. Nabarro: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 213–18.10.1007/s11661-002-0083-8 ↗
63. R.W. Evans and B. Wilshire: Creep of Metals and Alloys, A The Institute of Metals, New York, NY, 1985.
64. C. Mercer, A.B.O. Soboyejo, and W.O. Soboyejo: Mater. Sci. Eng., 1999, vol. A270 (2), pp. 308–22.10.1016/S0921-5093(99)00214-2 ↗
65. J.M. Oblack, D.F. Paulonis, and D.S. Duvall: Metall. Trans., 1974, vol. 5, pp. 143–53.10.1007/BF02642938 ↗