journal article·2008-02

Processing, Microstructure, Texture, and Tensile Properties of the Ti-6Al-4V-1.55B Eutectic Alloy

Orest M. Ivasishin, Roman V. Teliovych, Volodymyr G. Ivanchenko, Seshacharyulu Tamirisakandala, Daniel B. Miracle

Publisher page

Abstract

Boron (B) addition to conventional titanium (Ti) alloys instigates precipitation of intermetallic TiB whiskers that provide significant increases in strength and stiffness. The eutectic composition is the maximum boron concentration that provides these benefits via melt processing while maintaining reasonable ductility and damage tolerance. The eutectic point for the most widely used Ti alloy, Ti-6Al-4V (wt pct), modified with B, was determined to occur at 1.55 ± 0.05B and 1545 ± 5 °C. The microstructure, texture, and tensile properties of the eutectic alloy are sensitive to ingot solidification conditions and melt pool morphology. Several microstructural forms in the as-cast condition as well as their transformation during thermomechanical processing (TMP) were identified. Two types of eutectic structures, aligned and random, were obtained. Cast microstructures with random eutectic colony orientation had no marked crystallographic texture, while cast aligned microstructure had a strong [020] texture for the TiB phase and a $$ {\left\langle {110} \right\rangle } $$ circular texture for the α-Ti phase. As-cast microstructure could be significantly modified via TMP. Fragmentation of TiB occurred during three-dimensional (3-D) forging and aligned microstructures were produced after rolling or extrusion. An attractive balance of strength and ductility was obtained after solution treatment in the full β condition followed by aging. The microstructure of the Ti-6Al-4V-1.55B eutectic alloy can be controlled to tailor the property combinations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. A.R.G. Brown, H. Brooks, K.S. Jepson, and G.I. Lewis: Technical Note No. MET/PHYS 343, Royal Aircraft Establishment, Farnborough, 1961
2. A.E. Palty, H. Margolin, J.P. Nielsen: Trans. ASM, 1954, vol. 46, pp. 312–28
3. T.B. Massalski, ed.: Binary Alloy Phase Diagrams, 2nd ed., ASM International, Materials Park, OH, 1990, p. 547
4. S. Tamirisakandala, D.B. Miracle, R. Srinivasan, J.S. Gunasekera: Adv. Mater. Processes, 2006, vol. 164, pp. 41–43
5. T.M. Godfrey, P.S. Goodwin, C.M. Ward-Close: Adv. Eng. Mater., 2000, vol. 2, pp. 85–9210.1002/(SICI)1527-2648(200003)2:3<85::AID-ADEM85>3.0.CO;2-U ↗
6. D.B. Miracle: in Metallic Materials with High Structural Efficiency, O.N. Senkov, D.B. Miracle, S.A. Firstov, eds., Kluwer Academic Publishers, Dordrecht, Netherlands, 2004, pp. 1–18
7. C.T. Sims, N.S. Stoloff, W.G. Hagel: SUPERALLOYS II, Wiley-Interscience, New York, NY, 1987, pp. 189–214
8. C. Schuh, D.C. Dunand: Int. J. Plast., 2001, vol. 17, pp. 317–4010.1016/S0749-6419(00)00038-3 ↗
9. Z. Fan, A.P. Miodovnik, L. Chandrasekaran, M. Ward-Close: J. Mater. Sci., 1994, vol. 29, pp. 1127–3410.1007/BF00351442 ↗
10. L.V. Artyukh, O.O. Bilous, A.A. Bondar, D.B. Borysov, M.P. Burka, P.S. Martsenyuk, N.I. Tsyganenko, and T.A. Shapoval: Int. Conf. on Science and Materials in the Frontier of Centuries: Advances and Challenges, Kyiv, Ukraine, 2002, p. 102
11. A. Bondar: Aluminium-Boron-Titanium, Landolt-Biernstein/New Series, Group IV: Physical Chemistry, vol. 11, Ternary Alloy Systems, subvolume A, Part 1, Light Metal Systems, G. Effenberg and S. Ilyenko, eds., Springer-Verlag, Heidelberg, Germany, 2004, pp. 80–101
12. A.A. Bondar, L.V. Artyukh, O.O. Bilous, T.Y. Velikanova, S.V. Firstov, and D.B. Miracle: Int. Conf. on Science and Materials in the Frontier of Centuries: Advances and Challenges, Kyiv, Ukraine, 2002, pp. 200–05
13. R. Elliott: Eutectic Solidification Processing. Crystalline and Glassy Alloys, Butterworth and Co., London, UK, 1983
14. Yu.N. Taran and V.I. Mazur: Structure of Eutectic Alloys (Structura Evtekticheskih Splavov), Metallurgy, Moscow, 1978 (in Russian)
15. R.B. Bhat, S. Tamirisa, D.J. McEldowney, D.B. Miracle: Materials Science and Technology: Affordable Metal Matrix Composites for High Performance Application II, TMS, Warrendale, PA, 2003, pp. 115–24
16. O.M. Ivasishin, V.N. Zamkov, P.E. Markovsky, A.N. Kalinyuk, R.V. Teliovich, and S.L. Semiatin: Ti 2003, Wiley-VCH, Weinheim, Germany, 2004, vol. 2, pp. 1259–66
17. R.V. Teliovich, S.V. Prikhod’ko, S.P. Oshkaderov: Zavodskaya Laboratoriya, 1989, vol. 7, p. 45 (in Russian)
18. R. Boyer, G.E. Welsch, E.W. Collins: Materials Property Handbook: Titanium Alloys, ASM International, Materials Park, OH, 1994, pp. 483–636
19. S. Tamirisakandala, R.B. Bhat, D.B. Miracle, S. Boddapati, R. Bordia, R. Vanover, V.K. Vasudevan: Scripta Mater., 2005, vol. 53, pp. 217–2210.1016/j.scriptamat.2005.03.038 ↗
20. O.O. Bilous, L.V. Artyukh, A.A. Bondar, T.Y. Velikanova, M.P. Burka, M.P. Brodnikovsyi, O.S. Fomichov, N.I. Tsyganenko, S.O. Firstov: Mater. Sci. Eng., A, 2005, vol. 402A, pp. 76–8310.1016/j.msea.2005.05.011 ↗
21. V.G. Lazarev and T.K. Polyakova: Non-Ferrous Metals (Zvetnye Metally), 1982, No. 3, pp. 86–87 (in Russian)
22. S. Gorsse, D.B. Miracle: Acta Mater., 2003, vol. 51, pp. 2427–4210.1016/S1359-6454(02)00510-4 ↗
23. C.F. Yolton, J.H. Moll: in Titanium’95: Science and Technology, P.A. Blenkinsop, W.J. Evans, H.M. Flower, eds., The Institute of Materials, London, 1996, pp. 2755–62
24. Z. Fan, L. Chandrasekaran, C.M. Ward-Close, A.P. Miodovnik: Scripta Metall. Mater., 1995, vol. 32, pp. 833–3810.1016/0956-716X(95)93210-U ↗
25. Metallic Materials Properties Development and Standardization (MMPDS), Scientific Report, National Technical Information Service (NTIS), Springfield, VA, Jan. 2003
26. S. Tamirisakandala, R.B. Bhat, D.J. McEldowney, D.B. Miracle: Materials Science and Technology: Affordable Metal Matrix Composites for High Performance Applications II, TMS, Warrendale, PA, 2003, pp. 185–94
27. O.M. Ivasishin, R.V. Teliovich: Mater. Sci. Eng., 1999, vol. A263, pp. 142–5410.1016/S0921-5093(98)01173-3 ↗