A comparative study of the porous TiNi shape-memory alloys fabricated by three different processes
Source abstract
Abstract
Porous TiNi shape-memory alloys (SMAs) have been successfully fabricated by three different processes, including capsule-free hot isostatic pressing (CF-HIP), conventional sintering (CS), and self-propagating high-temperature synthesis (SHS). A systematically comparative investigation was made on their phase transformation behaviors, mechanical properties, superelasticity, and damping performance. The results show that the CF-HIP process is the best among these methods. By controlling the processing parameters of CF-HIP, the porous TINi SMA shows the expected pore characteristics, such as a round pore shape and a homogeneous pore distribution. The porous TiNi SMA produced by CF-HIP also exhibits good properties, such as superior superelasticity (up to 4 pct recoverable strain), a flat stress yield plateau, and a high compressive strength, similar to those of the dense TiNi SMAs. In addition, the porous TiNi SMA produced by CF-HIP has a much smaller strain hysteresis, superior damping performance to a porous TiNi SMAs produced with CS, and SHS.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. K. Otsuka and C.M. Wayman: Shape Memory Materials, 1st ed., Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 220–54.
2. D.Y. Li: Smart Mater. Struct., 2000, vol. 9, pp. 717–26.10.1088/0964-1726/9/5/317 ↗
3. J.A. Helsen and H.J. Breme: Metals as Biomaterials, 1st ed., John Wiley & Sons, Chichester, United Kingdom, 1998, pp. 73–100.
4. A. Pelton, D. Hodgson, and T. Duerig: Proc. 1st Int. Conf. on Shape Memory and Superelastic Technologies, SMST-94, SMST Proc., Pacific Grove, CA, 1997, pp. 449–53.
5. B. Silberstein: Proc. 2nd Int. Conf. on Shape Memory and Superelastic Technologies, Monterey, CA, 1997, pp. 617–21.
6. L’H. Yahia: Shape Memory Implants, 1st ed., Springer, Berlin, 2000, pp. 147–52.10.1007/978-3-642-59768-8 ↗
7. Y. Hudoh, M. Tokonami, S. Miyazaki, and K. Otusuka: Acta. Metall., 1985, vol. 33, pp. 2049–56.10.1016/0001-6160(85)90128-2 ↗
8. W.J. Buehler, J.V. Gilfrich, and R.C. Weiley: J. Appl. Phys., 1963, vol. 34, pp. 1475–79.10.1063/1.1729603 ↗
9. T. Saburi, T. Tatsumi, and S. Nenno: J. Phys. 1982, vol. 43, pp. 261–66.
10. H. Funakubo: Shape Memory Alloys, 1st ed., Gordon and Breach Science Publishers, Amsterdam, 1987, pp. 226–70.
11. K. Otsuka and C.M. Wayman: Shape Memory Materials, Cambridge University Press, Cambridge, United Kingdom, 1998, pp. 267–81.
12. H.C. Yi and J.J. Moore: Scripta Metall., 1988, vol. 22, pp. 1889–92.10.1016/S0036-9748(88)80232-1 ↗
13. I. Martynova, V. Skorohod, S. Solonin, and S. Goncharuk: J. Phys. IV, 1991, coll. C4, pp. 421–26.
14. V.I. Itin, V.E. Gjunter, S.A. Shabalovskaya, and R.L.C. Sachdeva: Mater. Characterization, 1994, vol. 32, pp. 179–87.10.1016/1044-5803(94)90087-6 ↗
15. C.L. Chu, B. Li, S.D. Wang, S.G. Zhang, X.X. Yang, and Z.D. Yin: Trans. Nonferrous Met. Soc. China, 1997, vol. 7, pp. 84–87.
16. B.Y. Li, L.J. Rong, Y.Y. Li, and V.E. Gjunter: J. Mater. Res., 2000, vol. 15, pp. 10–13.10.1557/JMR.2000.0004 ↗
17. B.Y. Li, L.J. Rong, and Y.Y. Li: J. Mater. Res., 1998, vol. 13, pp. 2847–51.10.1557/JMR.1998.0389 ↗
18. E.L. Vandygriff, D.C. Lagoudas, K. Thangarai, and Y.C. Chen: Proc. ASC 15th Annual Technical Conf., 2000, pp. 239–47.
19. B. Yuan, C.Y. Chung, and M. Zhu: Mater. Sci. Eng. A, 2004, vol. 382, pp. 181–87.10.1016/j.msea.2004.04.068 ↗
20. ASTM Standard B328, ASTM, Philadelphia, PA, 1987.
21. Annual Book of ASTM Standard E9-89a, Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature, Philadelphia, PA, 1989, pp. 105–13.
22. B.Y. Li: Ph.D. Thesis, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, China, 2000, pp. 84–100.
23. B.Y. Li, L.J. Rong, Y.Y. Li, and V.E. Gjunter: Acta Mater., 2000, vol. 48, pp. 3895–904.10.1016/S1359-6454(00)00184-1 ↗
24. B.Y. Li, L.J. Rong, X.H. Luo, and Y.Y. Li: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 2753–56.10.1007/s11661-999-0112-y ↗
25. L.J. Gibson, D. Green, and K. Sierazki: Mechanical Properties of Porous and Cellular Materials, 1st ed., Materials Research Society, Pittsburgh, PA, 1991, vol. 207, pp. 135–40.
26. M.A. Qidwai, P.B. Entchev, D.C. Lagoudas, and V.G. Degiorgi: Int. J. Solids Struct., 2001, vol. 38, pp. 8653–71.10.1016/S0020-7683(01)00118-4 ↗