journal article·2008-01

Characteristics of the Transition from Grain-Boundary Sliding to Solute Drag Creep in Superplastic AA5083

Terry R. McNelley, Keiichiro Oh-Ishi, Alexander P. Zhilyaev, Srinivasan Swaminathan, Paul E. Krajewski, Eric M. Taleff

Publisher page

Abstract

Superplastic tensile ductility has been attained when specially-processed AA5083 materials are strained in tension at relatively high strain rates, in the range of the transition from grain-boundary sliding (GBS) to solute drag creep (SDC) control of deformation. Quick plastic forming (QPF) technology involves deformation at such strain rates, and the relative contributions of GBS and SDC to the strain during deformation in this strain rate regime have been examined in this investigation. The additive, independent contributions of GBS and SDC to the elevated temperature deformation of fine-grained materials are reviewed. The transition from GBS to SDC in grain-refined AA5083 materials was evaluated by several methods, including the assessment of initial transients during straining and of transients during strain-rate change tests; the strain-rate dependence of the flow stress; the dependence of ductility on strain rate; flow localization behavior and fracture mode; cavitation growth; the evolution of microstructure and microtexture during deformation; and comparison with phenomenological models for the GBS-to-SDC transition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. A. Kelkar, R. Roth, J. Clark: JOM, 2001, vol. 53 (8), pp. 28–32.10.1007/s11837-001-0131-7 ↗
2. P.A. Friedman, S.G. Luckey: Mater. Sci. Forum, 2003, vols. 447–448, pp. 199–204.
3. J.G. Schroth: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 9–10.
4. K. Osada, K Shirkawa: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 41–49.
5. P.E. Krajewski: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 173–83
6. M.A. Kulas, W.P. Green, E.M. Taleff, P.E. Krajewski, T.R. McNelley: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1249–61.10.1007/s11661-005-0217-x ↗
7. E.M. Taleff, W.P. Green, M.A. Kulas, T.R. McNelley, P.E. Krajewski: Mater. Sci. Eng. A, 2005, vols. 410–411, pp. 32–37.10.1016/j.msea.2005.08.085 ↗
8. W.P. Green, M.A. Kulas, A. Niazi, K. Oh-ishi, E.M. Taleff, P.E. Krajewski, T.R. McNelley: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2727–38.10.1007/BF02586106 ↗
9. O.D. Sherby, P.M. Burke: Progr. Mater. Sci., 1968, vol. 13, pp. 325–90.10.1016/0079-6425(68)90024-8 ↗
10. M.E. Kassner, M.T. Pérez-Prado: Fundamentals of Creep in Metals and Alloys, Elsevier, Amsterdam, 2004, pp. 13–87.10.1016/B978-008043637-1/50003-X ↗
11. D.A. Woodford: Trans. ASM, 1969, vol. 62, pp. 29–99.
12. T.G. Nieh, J. Wadsworth, O.D. Sherby: Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, United Kingdom, 1997, pp. 189–20410.1017/CBO9780511525230.011 ↗
13. T.G. Nieh, J. Wadsworth, O.D. Sherby: Superplasticity in Metals and Ceramics, Cambridge University Press, Cambridge, United Kingdom, 1997, pp. 58–6910.1017/CBO9780511525230.006 ↗
14. A. Ball, M.M. Hutchison: Met. Sci. J., 1969, vol. 3, pp. 1–710.1016/0036-9748(69)90167-7 ↗
15. T.G. Langdon: Metall. Trans. A, 1982, vol. 13A, pp. 689–701.10.1007/BF02642383 ↗
16. J.W. Edington: Metall. Trans. A, 1982, vol. 13A, pp. 703–15.10.1007/BF02642384 ↗
17. A. Arieli, A.K. Mukherjee: Metall. Trans. A, 1982, vol. 13A, pp. 717–3210.1007/BF02642385 ↗
18. O.D. Sherby, J. Wadsworth: in Deformation Processing and Structure, G. Kraus, ed., ASM, Metals Park, OH, 1984, pp. 355–87.
19. G.S. Murty, M.J. Koczak: Mater. Sci. Eng., 1987, vol. 96, pp. 117–24.10.1016/0025-5416(87)90546-5 ↗
20. O.A. Ruano, O.D. Sherby: Rev. Phys. Appl., 1988, vol. 23, pp. 625–35.10.1051/rphysap:01988002304062500 ↗
21. O.D. Sherby, J. Wadsworth: Progr. Mater. Sci., 1989, vol. 33, pp. 169–221.10.1016/0079-6425(89)90004-2 ↗
22. T.G. Langdon: Mater. Sci. Eng., 1991, vol. A137, pp. 1–1110.1016/0921-5093(91)90312-B ↗
23. R.C. Gifkins: Metall. Trans. A, 1976, vol. 7A, pp. 1225–3210.1007/BF02656607 ↗
24. W.R. Canon, O.D. Sherby: Metall. Trans., 1970, vol. 1, pp. 1030–3210.1007/BF02811789 ↗
25. F.A. Mohamed, T.G. Langdon: Acta Metall., 1974, vol. 22, pp. 779–8810.1016/0001-6160(74)90088-1 ↗
26. S. Takeuchi, A.S. Argon: J. Mater. Sci., 1976, vol. 11, pp. 1542–5110.1007/BF00540888 ↗
27. W.C. Oliver, W.D. Nix: Acta Metall., 1982, vol. 30, pp. 1335–4710.1016/0001-6160(82)90153-5 ↗
28. T.R. McNelley, D.J. Michel, A. Salama: Scripta Metall., 1989, vol. 23, pp. 1657–6210.1016/0036-9748(89)90338-4 ↗
29. I.C. Hsiao, J.C. Huang: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 1373–8410.1007/s11661-002-0062-0 ↗
30. E.M. Taleff: in Advances in Superplasticity and Superplastic Forming, E.M. Taleff, P.A. Friedman, P.E. Krajewski, R.S. Mishra, J.G. Schroth, eds., TMS, Warrendale, PA, 2004, pp. 85–94
31. E.M. Taleff, G.A. Henshall, T.G. Nieh, D.R. Lesuer, J. Wadsworth: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1081–91
32. E.M. Taleff, P.J. Nevland, P.E. Krajewski: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1119–3010.1007/s11661-001-0123-9 ↗
33. E.M. Taleff, J. Qiao: in Light Metals 2001: Métaux Légers, M. Sahoo and T. Lewis, eds., Canadian Institute of Mining, Metallurgy and Petroleum, Montreal, 2001, pp. 77–88.
34. T.S. Lundy, J.F. Murdoch: J. Appl. Phys., 1962, vol. 33, pp. 1671–7310.1063/1.1728808 ↗
35. D. Turnbull: Trans. Am. Inst. Min. Metall. Eng., 1951, vol. 191, pp. 661–65
36. H.J. Frost, M.F. Ashby: Deformation Mechanism Maps, Pergamon, Oxford, United Kingdom, 1982, p. 21
37. G. Moreau, J.A. Cornet, D. Calais: J. Nucl. Mater., 1971, vol. 38, pp. 197–20210.1016/0022-3115(71)90043-2 ↗
38. S.J. Rothman, N.L. Peterson, L.J. Nowicki, L.C. Rothman: Phys. Status Solidi (B), 1974, vol. 63, pp. K29–K3310.1002/pssb.2220630151 ↗
39. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworth and Co., London, 1976, p. 311
40. M.A. Kulas, W.P. Green, E.M. Taleff, P.E. Krajewski, T.R. McNelley: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 645–5510.1007/s11661-006-0036-8 ↗
41. K. Oh-Ishi, J. Boydon, T.R. McNelley: J. Mater. Eng. Perform., 2004, vol. 13 (6), pp. 710–1910.1361/10599490421349 ↗
42. M.T. Pérez-Prado, G. González-Doncel, O.A. Ruano, T.R. McNelley: Acta Mater., 2001, vol. 49, pp. 2259–6810.1016/S1359-6454(01)00128-8 ↗
43. V. Randle, O. Engler: Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, Gordon and Breach, Amsterdam, 2000, pp. 127–3310.1201/9781482287479 ↗
44. A.P. Zhilyaev, K. Oh-Ishi, G.I. Raab, T.R. McNelley: Mater. Sci. Eng., 2006, vol. A441, pp. 245–5210.1016/j.msea.2006.08.029 ↗
45. J.H. Han, D.Y. Kim: Acta Metall. Mater., 1995, vol. 43, pp. 3185–88.10.1016/0956-7151(95)00007-I ↗
46. M. Hatherley, W.B. Hutchinson: An Introduction to Textures in Metals, Chemeloeon Press, London, 1979, p. 11
47. J.K. Mackenzie: Biometrika, 1958, vol. 45, pp. 229–4010.1093/biomet/45.1-2.229 ↗
48. N. Gao, S.C. Wang, H.S. Ubhi, M.J. Starink: J. Mater. Sci., 2005, vol. 40, pp. 4971–74.10.1007/s10853-005-3867-6 ↗
49. M.-A. Kulas, P.E. Krajewski, T.R. McNelley, E.M. Taleff: in Hot Deformation of Aluminum Alloys III, Z. Jin, A. Beaudoin, T. Bieler, B. Radhakrishnan, eds., TMS, Warrendale, PA, 2003, pp. 499–507
50. M.A. Khaleel, H.M. Zbib, E.A. Nyberg: Int. J. Plast., 2001, vol. 17, pp. 277–9610.1016/S0749-6419(00)00036-X ↗
51. D.H. Bae, A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 993–1009.10.1016/S1359-6454(01)00399-8 ↗
52. D.H. Bae, A.K. Ghosh: Acta Mater., 2002, vol. 50, pp. 1011–29.10.1016/S1359-6454(01)00400-1 ↗
53. F.J. Humphreys: Acta Metall., 1977, vol. 25, pp. 1323–4410.1016/0001-6160(77)90109-2 ↗
54. B.M. Watts, M.J. Stowell, B.L. Baike, D.G.E. Owen: Met. Sci. J., 1976, vol. 10 (6), pp. 189–97
55. E. Hornbogen: Metall. Trans. A, 1979, vol. 10A, pp. 947–72.10.1007/BF02811643 ↗
56. R. Grimes: in Superplasticity, Lecture Series 168, NATO Advisory Group for Aerospace Research and Development (AGARD), Paris, 1988, pp. 8.1–8.16
57. S.J. Hales, T.R. McNelley: Acta Metall., 1988, vol. 36, pp. 1229–39.10.1016/0001-6160(88)90275-1 ↗
58. F.J. Humphreys: Acta Mater., 1997, vol. 45, pp. 4231–4010.1016/S1359-6454(97)00070-0 ↗
59. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D. Juul Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, R.D. Rollett: Mater. Sci. Eng., 1997, vol. A238, pp. 219–7410.1016/S0921-5093(97)00424-3 ↗
60. T.R. McNelley, M.E. McMahon: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1879–87.10.1007/s11661-997-0118-2 ↗
61. M.T. Pérez-Prado, T.R. McNelley, O.A. Ruano, G. González-Doncel: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 485–9210.1007/s11661-998-0129-7 ↗
62. T.R. McNelley, M.E. McMahon, M.T. Pérez-Prado: Philos. Trans. R. Soc. A, 1999, vol. 357, pp. 1683–170510.1098/rsta.1999.0396 ↗
63. T.R. McNelley, D.L. Swisher, M.T. Pérez-Prado: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 279–9010.1007/s11661-002-0089-2 ↗