journal article·2003-12

Microstructure development during hot deformation of aluminum to large strains

Tanja Pettersen, Bjørn Holmedal, Erik Nes

Publisher page

Abstract

During deformation, the original grains change their shape and the surface area per unit volume increases with strain until a certain critical strain has been reached. The structure of high-angle boundaries has been monitored at increasing strains with the aim of finding the effect of grain breakup and strain-induced boundary migration. It has been found that the distance between the high-angle boundaries does not depend only on geometrical considerations. At high Zener-Hollomon parameters, the distance between the high-angle boundaries was found to be smaller than predicted from geometry, indicating that high-angle boundaries are formed during deformation. In the case of deformation at very low Zener-Hollomon parameters, the distance between the high-angle boundaries was found to be larger than predicted from geometry, which indicates migration of the original grain boundaries in a direction opposite to the one imposed by the deformation. The evolution in grain-boundary structure during deformation has been successfully modeled on the basis of expressions for the grain breakup and restoration reactions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. F.J. Humphreys: Proc. ICOTOM, 1982, vol. 6 (1), pp. 625–30.
2. H.J. McQueen, O. Knustad, N. Ryum, and J.K. Solberg: Scripta Metall., 1985, vol. 19, pp. 73–78.10.1016/0036-9748(85)90268-6 ↗
3. M.E. Kassner and M.E. McMahon: Metall. Trans. A, 1987, vol. 18, pp. 835–46.10.1007/BF02646925 ↗
4. J.K. Solberg, H.J. McQueen, N. Ryum, and E. Nes: Phil. Mag. A, 1989, vol. 60, pp. 447–71.10.1080/01418618908213872 ↗
5. H.J. McQueen, J.K. Solberg, N. Ryum, and E. Nes: Phil. Mag. A, 1989, vol. 60, pp. 473–85.10.1080/01418618908213873 ↗
6. O. Knustad, H.J. McQueen, N. Ryum, and J.K. Solberg: Practical Metallogr., 1985, vol. 22, pp. 215–29.10.1515/pm-1985-220502 ↗
7. F.J. Humphreys and M. Hatherley: Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, United Kingdom, 1995.
8. T. Pettersen: Ph.D. Thesis, Norwegian University of Science and Technology, Trondheim, Norway, 1999.
9. T. Pettersen and E. Nes: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2727–36.10.1007/s11661-003-0174-1 ↗
10. H.E. Vatne: PhD Thesis, Norwegian University of Science and Technology, Trondheim, 1995.
11. H.E. Vatne, R. Shahani, and E. Nes: Acta Mater., 1996, vol. 44, pp. 4447–61.10.1016/1359-6454(96)00077-8 ↗
12. I.L. Dillamore and H. Katoh: Met. Sci., 1974, vol. 8, pp. 73–83.10.1179/msc.1974.8.1.73 ↗
13. D.A. Huges: Proc. 16th Risø Int. Symp. on Material Science, 1995, Risø National Laboratory, Roskilde, Denmark, pp. 63–85.
14. D.A. Huges and A. Godfrey: Hot Deformation of Aluminium Alloys II, The Minerals, Metals & Materials Society, Warrendale, PA, USA, 1998, pp. 23–36.