journal article·2002-02

Creep at very low rates

F. R. N. Nabarro

Publisher page

Abstract

The creep rate in a land-based power station must be less than 10−11 s−1. At these low rates of deformation the transport of matter occurs by the migration of vacancies rather than by the glide of dislocations. A quantitative understanding of these diffusional processes is, therefore, important. First type of diffusional creep (Nabarro-Herring (N-H)): the sources and sinks of vacancies are grain boundaries. The vacancies may diffuse through the bulk of the grain or along the grain boundaries (Coble (C)). Second type (Harper-Dorn (H-D)): the vacancies diffuse from edge dislocations with their Burgers vectors parallel to the major tensile axis to those with Burgers vectors perpendicular to this axis. The coherence of the polycrystalline aggregate is maintained by sliding along the grain boundaries. The three mechanisms of vacancy migration, grain boundary sliding, and dislocation glide may all interact. The theories of N-H and C creep in pure metals are established and confirmed, but H-D creep and grain boundary sliding are less well understood.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. F.R.N. Nabarro: Report of Conf. on Strength of Solids, Physics Society, London, 1948, p. 75.
2. C. Herring: J. Appl. Phys., 1950, vol. 21, p. 437.10.1063/1.1699681 ↗
3. R.L. Coble: J. Appl. Phys., 1963, vol. 34, p. 1679.10.1063/1.1702656 ↗
4. J.R. Spingarn and W.D. Nix: Acta Metall., 1979, vol. 27, p. 171.10.1016/0001-6160(79)90093-2 ↗
5. B. Burton: Diffusional Creep of Polycrystalline Materials, Trans Tech Publications, Aedermannsdorf, Switzerland, 1977.
6. I.M. Lifshitz: Sov. Phys. JETP, 1963, vol. 17, p. 909.
7. W. Beeré: Met. Sci., 1976, vol. 10, p. 133.10.1016/0036-9748(76)90215-5 ↗
8. W.D. Nix: Mater. Sci. Forum, 1981, vol. 4, p. 38.
9. J.H. Schneibel, R.L. Coble, and R.M. Cannon: Acta Metall., 1981, vol. 29, p. 1285.10.1016/0001-6160(81)90019-5 ↗
10. J.E. Harris, R.B. Jones, G.W. Greenwood, and M.J. Ward: J. Aust. Inst. Met., 1969, vol. 14, p. 154.
11. G.B. Gibbs: Mem. Sci. Rev. Met., 1965, vol. 62, p. 781.
12. B. Burton: Met. Sci. J., 1973, vol. 7, p. 1.10.1016/0036-9748(73)90170-1 ↗
13. B. Burton: Mater. Sci. Eng., 1973, vol. 11, p. 337.10.1016/0025-5416(73)90124-9 ↗
14. O.D. Sherby, O.A. Ruano, and J. Wadsworth: in Creep Behaviour of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K. Linga Murty, eds., TMS, Warrendale, PA, 1999, p. 397.
15. J. Wadsworth, O.A. Ruano, and O.D. Sherby: in Creep Behaviour of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K. Linga Murty, eds., TMS, Warrendale, PA, 1999, p. 425.
16. B. Wilshire: in Creep Behaviour of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K. Linga Murty, eds., TMS, Warrendale, PA, 1999, p. 451.
17. J.B. Bilde-Sørensen and D.A. Smith: Proc. 8th Int. Conf. Strength Metals and Alloys, P.O. Kettunen, T.K. Lepistö, and M.E. Lehtonen, eds., Pergamon, New York, NY, 1988, p. 869.
18. J.B. Bilde-Sørensen and D.A. Smith: Scripta Metall. Mater., 1994, vol. 30, p. 383.10.1016/0956-716X(94)90393-X ↗
19. F.R.N. Nabarro: in Creep Behaviour of Advanced Materials for the 21st Century, R.S. Mishra, A.K. Mukherjee, and K. Linga Murty, eds., TMS, Warrendale, PA, 1999, p. 391.
20. R.L. Squires, R.T. Weiner, and M. Phillips: J. Nucl. Mater., 1963, vol. 8, p. 77.10.1016/0022-3115(63)90010-2 ↗
21. Anwar-ul Karim, D.L. Holt, and W.A. Backofen: Trans. TMS-AIME, 1969, vol. 245, p. 2421.
22. E.H. Aigeltinger and R.C. Gifkins: J. Mater. Sci., 1975, vol. 10, p. 1889.10.1007/BF00754479 ↗
23. J. Bilde-Sørensen and P.A. Thorsen: in Boundaries and Interfaces in Materials, R.C. Pond, W.A.T. Clark, A.H. King, and D.B. Williams, eds., TMS, Warrendale, PA, 1998, p. 179.
24. M.F. Ashby: Scripta Metall., 1969, vol. 3, p. 837.10.1016/0036-9748(69)90191-4 ↗
25. H. Gleiter: Acta Metall., 1979, vol. 27, p. 187.10.1016/0001-6160(79)90095-6 ↗
26. K.R. McNee, G.W. Greenwood, and H. Jones: Scripta Mater., 2001, vol. 44, p. 351.10.1016/S1359-6462(00)00570-4 ↗
27. K.R. McNee, H. Jones, and G.W. Greenwood: in Creep and Fracture of Engineering Materials and Structures, J.D. Parker, ed., The Institute of Materials, London, 2001.
28. B. Burton and G.W. Greenwood: Met. Sci. J., 1970, vol. 4, p. 215.10.1179/msc.1970.4.1.215 ↗
29. B. Pines and F. Sirenko: Fiz. Metall. Metalloved., 1963, vol. 15, p. 584, reproduced in Ref. 30.
30. O.A. Ruano, J. Wadsworth, J. Wolfenstine, and O.S. Sherby: Mater. Sci. Eng., 1993, vol. A165, p. 133.10.1016/0921-5093(93)90747-3 ↗
31. Y. Ogino: Scripta Mater., 2000, vol. 43, p. 149.10.1016/S1359-6462(00)00384-5 ↗
32. P. Yavari, D.A. Miller, and T.G. Langdon: Acta Metall., 1982, vol. 30, p. 871.10.1016/0001-6160(82)90085-2 ↗
33. Mu Yeh Wu and O.D. Sherby: Acta Metall., 1984, vol. 32, p. 1561.10.1016/0001-6160(84)90102-0 ↗
34. W. Blum and W. Maier: Phys. Status Solidi (a), 1999, vol. 171, p. 467.10.1002/(SICI)1521-396X(199902)171:2<467::AID-PSSA467>3.0.CO;2-8 ↗
35. K.R. McNee, H. Jones, and G.W. Greenwood: in Creep and Fracture of Engineering Materials and Structures, J.D. Parker, ed., The Institute of Materials, London.
36. F.R.N. Nabarro: Acta Metall., 1989, vol. 37, p. 2217.10.1016/0001-6160(89)90147-8 ↗
37. J.N. Wang: Scripta Metall., 1993, vol. 29, p. 1505.10.1016/0956-716X(93)90345-S ↗
38. J.N. Wang: Acta Mater., 1996, vol. 44, p. 855.10.1016/1359-6454(95)00281-2 ↗
39. J.N. Wang and T.G. Nieh: Acta Metall. Mater., 1995, vol. 43, p. 1415.10.1016/0956-7151(94)00368-R ↗
40. F.A. Mohamed and T.J. Ginter: Acta Metall., 1982, vol. 30, p. 1869.10.1016/0001-6160(82)90027-X ↗
41. B. Burton and G.W. Greenwood: Acta Metall., 1970, vol. 18, p. 1237.10.1016/0001-6160(70)90153-7 ↗
42. E.C. Muehleisen and W.D. Nix: Mater. Sci. Eng., 1972, vol. 10, 33.10.1016/0025-5416(72)90063-8 ↗
43. T.J. Ginter, P.K. Chaudhury, and F.A. Mohamed: Acta Mater., 2001, vol. 49, p. 263.10.1016/S1359-6454(00)00316-5 ↗
44. J. Fiala, J. Novotny, and J. Čadek: Mater. Sci. Eng., 1983, vol. 60, p. 195.10.1016/0025-5416(83)90002-2 ↗
45. T.G. Langdon: Mater. Sci. Eng., 2000, vol. A283, p. 266.10.1016/S0921-5093(00)00624-9 ↗
46. J.N. Wang: Acta Mater., 2000, vol. 48, p. 1517.10.1016/S1359-6454(99)00450-4 ↗
47. M.F. Ashby and R.A. Verall: Acta Metall., 1973, vol. 21, p. 149.10.1016/0001-6160(73)90057-6 ↗
48. A. Ball and M.M. Hutchison: Met. Sci. J., 1969, vol. 3, p. 1.10.1016/0036-9748(69)90167-7 ↗
49. A.K. Mukherjee: Mater. Sci. Eng., 1971, vol. 8, p. 83.10.1016/0025-5416(71)90085-1 ↗
50. R. Raj and M.F. Ashby: Metall. Trans., 1971, vol. 2, p. 1113.10.1007/BF02664244 ↗
51. J.G. Harper, L.A. Shepard, and J.E. Dorn: Acta Metall., 1958, vol. 6, p. 509.10.1016/0001-6160(58)90114-7 ↗
52. B.Z. Valiev and O.A. Kaibyshev: Phys. Status Solidi (a), 1977, vol. 44, p. 65.10.1002/pssa.2210440106 ↗
53. H. Lüthy, R.A. White, and O.D. Sherby: Mater. Sci. Eng., 1979, vol. 39, p. 211.10.1016/0025-5416(79)90060-0 ↗
54. J. Schiøtz, T. Vegge, F.D. di Tolla, and K.W. Jacobsen: Proc. 19th Risø Int. Symp. on Materials Science, J.V. Carstensen, T. Leffers, T. Lorentzen, O.B. Pedersen, B.F. Sørensen, and G. Winther, eds., Risø National Laboratory, Roskilde, Denmark, 1998, p. 133.
55. A.H. Chokshi: Scripta Metall., 1985, vol. 19, p. 529.10.1016/0036-9748(85)90128-0 ↗
56. J. Novotý, J. Fiala, and J. Čadek: Acta Metall., 1983, vol. 31, p. 1697.10.1016/0001-6160(83)90168-2 ↗
57. F.R.N. Nabarro: Phys. Solid State, 2000, vol. 42, p. 1417.10.1134/1.1307052 ↗
58. J. Fiala and T.G. Langdon: Mater. Sci. Eng., 1992, vol. A151, p. 147.10.1016/0921-5093(92)90202-C ↗
59. J.N. Wang: Phil. Mag., 1995, vol. A71, p. 105.10.1080/01418619508242958 ↗
60. B.P. Kashyap, A. Arieli, and A.K. Mukherjee: J. Mater. Sci., 1985, vol. 20, p. 2661.10.1007/BF00553028 ↗