journal article·2006-04

Time-resolved in-situ analysis of phase evolution for the directional solidification of carbon steel weld metal

H. Terasaki, Y. Komizo, M. Yonemuira, T. Osuki

Publisher page

Abstract

Kinetic information about the phase transformation, during solidification process and solid-state transformation is essential to the material processing, such as welding. In our research group, in-situ phase identification system consisting of undulator beam and imaging plate have recently been used. The welding torch is driven by stepping-motor in the system. Those make possible that phase transformation can be identified in real-time under the condition of directional solidification and the spatial resolution of 100 × 500 µm. The time-resolution is 0.3125 seconds. In the present work, combination of analyzing method: the in-situ phase identification system, morphological observation by high-temperature laser scanning confocal microscopy and observation of microstructure at room temperature by OM, SEM and micro diffraction-system, is suggested to analyze the phase transformation during welding process. Phase transformation process of hypereutectoid carbon steel, during welding was analyzed as an example of combination observation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Welding Techniques and Residual Stresses · Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. S. Kou and Y. Le: Metall. Trans. A, 1982, vol. 13A, pp. 1141–52.10.1007/BF02645495 ↗
2. F. Matsuda, H. Nakagawa, and J.B. Lee: Trans. JWRI, 1987, vol. 16 (2), pp. 115–21.
3. H. Inoue, T. Koseki, S. Ohkita, and M. Fuji: Q. J. Jpn. Welding Soc., 1997, vol. 15 (1), pp. 77–87.10.2207/qjjws.15.77 ↗
4. H. Inoue, T. Koseki, S. Ohkita, and M. Fuji: Q. J. Jpn. Welding Soc., 1977, vol. 15 (1), pp. 88–99.10.2207/qjjws.15.88 ↗
5. J.W. Elmer, J. Wong, and M. Froba, P.A. Waide, and E.M. Larson: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 775–83.10.1007/BF02648965 ↗
6. J.W. Elmer, J. Wong, and T. Ressler: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1175–87.10.1007/s11661-001-0127-5 ↗
7. T.A. Palmer, J.W. Elmer, and J. Wong: Sci. Technol. Welding Joining, 2002, vol. 7 (3), pp. 159–71.10.1179/136217102225004194 ↗
8. J.W. Elmer, J. Wong, and T. Ressler: Scripta Mater., 2000, vol. 43, pp. 751–57.10.1016/S1359-6462(00)00481-4 ↗
9. S.S. Babu, J.W. Elmer, J.M. Vitek, and S.A. David: Acta Mater., 2002, vol. 50, pp. 4763–81.10.1016/S1359-6454(02)00317-8 ↗
10. M. Yonemura, T. Osuki, S. Inoue, K. Miyabe, Y. Komizo, H. Terasaki, M. Sato, and A. Kitano: SPring-8 User Experiment Report 2004A, Hyogo, Japan, 2004, p. 244.
11. H. Kitamura, S. Tamamushi, T. Yamakawa, S. Sato, Y. Miyahara, G. Isoyama, H. Nishimura, A. Mikuni, S. Asaoka, S. Mitani, H. Maezawa, Y. Suzuki, H. Kanamori, and T. Sasaki: Jpn. J. Appl. Phys., 1982, vol. 21 (12), pp. 1728–31.10.1143/JJAP.21.1728 ↗
12. H. Yin, T. Emi, and H. Shibata: Iron Steel Inst. Jpn. Int., 1998, vol. 38 (8), pp. 794–801.10.2355/isijinternational.38.794 ↗
13. H. Chikama, H. Shibata, T. Emi, and M. Suzuki: Mater. Trans., JIM, 1996, vol. 37 (4), pp. 620–26.10.2320/matertrans1989.37.620 ↗
14. H. Yin, T. Emi, and H. Shibata: Acta Mater., 1999, vol. 47 (5), pp. 1523–35.10.1016/S1359-6454(99)00022-1 ↗
15. R.J. Dippenaar and D.J. Phelan: Metall. Trans. B, 2003, vol. 34B, pp. 495–501.10.1007/s11663-003-0016-y ↗
16. Metallography and Microstructures (ASM Handbook), vol. 9, G.F. Vander Voort, ed., ASM International, Materials Park, OH, 2004, p. 64.
17. A.R. Marder and J.I. Goldstein E, eds., Phase Transformations in Ferrous Alloys, TMS-AIME, Warrendale, PA, 1984, pp. 201–36.
18. L.E. Samuels: Light Microscopy of Carbon Steels, ASM INTERNATIONAL, Materials Park, OH, 1999, p. 269.10.31399/asm.tb.lmcs.9781627082914 ↗
19. G. Seyffarth: Schweiβ-ZTU-Schaubilder, VEB Verlag Technik, Berlin, 1982, p. 174.
20. T. Kasugai and M. Fujita: Atlas of CCT Diagrams for Welding (1), NRIM Special Report No. 99-02, National Research Institute for Metals, 1-2-1, Sengen, Tsukuba-shi, Ibaraki, Japan, 1999, p. 12.
21. C. Bronnimann, R. Baur, E.F. Eikenberry, P. Fischer, S. Florin, R. Horisberger, M. Lindner, B. Schmitt, and C. Schulze: Nucl. Instrum. Meth., 2002, vol. A477, pp. 531–35.10.1016/S0168-9002(01)01916-7 ↗
22. 22.E.F. Eikenberry, C. Bronnimann, G. Hulsen, H. Toyokawa, R. Horisberger, B. Schmitt, C. Schulze, and T. Tomizaki: Nucl. Instrum. Meth., 2003, vol. A501, pp. 260–66.10.1016/S0168-9002(02)02044-2 ↗
23. B.D. Culity: Elements of X-Ray Diffraction, Addison-Wesley Pub., Reading, MA, 1978, pp. 126–27.
24. R. Trivedi, S.A. David, M.A. Eshelman, J.M. Vitek, S.S. Babu, T. Hong, and T. DebRoy: J. Appl. Phys., 2003, vol. 93 (8), pp. 4885–95.10.1063/1.1559934 ↗